1. Thermal structure of old continental lithosphere from the inversion of surface-wave dispersion with thermodynamic a-priori constraints N. Shapiro, M. Ritzwoller, University of Colorado at Boulder J.-C. Mareschal, Université du Québec à Montréal C. Jaupart, Institut de Physique du Globe de Paris

2. Objectives 1.to reconcile thermal and seismic models of the old continental lithosphere 2.to develop methods for joint inversion of the seismic and the thermal data

3. Thermal models of the old continental lithosphere from Jaupart and Mareschal (1999)from Poupinet et al. (2003) 1.Constrained by thermal data: heat flow, xenoliths 2.Derived from simple thermal equations 3.Lithosphere is defined as an outer conductive layer 4.Estimates of thermal lithospheric thickness are highly variable

4. Seismic models of the old continental lithosphere 1.Based on ad-hoc choice of reference 1D models and parameterization 2.Complex vertical profiles that do not agree with simple thermal models 3.Seismic lithospheric thickness is not uniquely defined Additional physical constraints are required to eliminate non-physical vertical oscillations in seismic profiles and to improve estimates of seismic velocities at each particular depth

5. Inversion of seismic surface-waves global set of broadband fundamental-mode Rayleigh and Love wave dispersion measurements (more than 200,000 paths worldwide) Group velocities 18-200 s. Measured at Boulder. Phase velocities 40-150 s. Provided by Harvard and Utrecht groups 1. Data 2. Two-step inversion procedure 1.Surface-wave tomography: construction of 2D dispersion maps 2.Inversion of dispersion curves for the shear-velocity model

6. Dispersion maps 100 s Rayleigh wave group velocity

7. Local dispersion curves All dispersion maps: Rayleigh and Love wave group and phase velocities at all periods

8. Inversion of dispersion curves Monte-Carlo sampling of model space to find an ensemble of acceptable models All dispersion maps: Rayleigh and Love wave group and phase velocities at all periods

9. Details of the inversion: seismic parameterization 1.Ad-hoc combination of layers and B-splines 2.Seismic model is slightly over- parameterized 3.Non-physical vertical oscillations Physically motivated parameterization is required

10. Details of the inversion: Monte-Carlo approach Linearized iterative inversion Monte-Carlo inversion: random sampling of the model space 1.Finds only one best-fit model. Does not provide reliable uncertainty estimates 2.Linearization can be numerically sophisticated

11. Details of the inversion: Monte-Carlo approach Linearized iterative inversion Monte-Carlo inversion: random sampling of the model space 1.Finds only one best-fit model. Do not provide reliable uncertainty estimations 2.Linearization can be numerically sophisticated 1.Finds an ensemble of acceptable models that can be used to estimate uncertainties 2.Does not require linearization. Easy transformation between seismic and temperature spaces

12. conversion between seismic velocity and temperature non-linear relation computed with the method of Geos et al. (2000) using laboratory-measured thermo-elastic properties of main mantle minerals and cratonic mantle composition

13. Monte-Carlo inversion of the seismic data based on the thermal description of model

14. 1.a-priori range of physically plausible thermal models

15. Monte-Carlo inversion of the seismic data based on the thermal description of model 1.a-priori range of physically plausible thermal models 2.constraints from thermal data (heat flow)

16. Monte-Carlo inversion of the seismic data based on the thermal description of model 1.a-priori range of physically plausible thermal models 2.constraints from thermal data (heat flow) 3.randomly generated thermal models

17. Monte-Carlo inversion of the seismic data based on the thermal description of model 1.a-priori range of physically plausible thermal models 2.constraints from thermal data (heat flow) 3.randomly generated thermal models 4.converting thermal models into seismic models

18. Monte-Carlo inversion of the seismic data based on the thermal description of model 1.a-priori range of physically plausible thermal models 2.constraints from thermal data (heat flow) 3.randomly generated thermal models 4.converting thermal models into seismic models 5.finding the ensemble of acceptable seismic models

19. Monte-Carlo inversion of the seismic data based on the thermal description of model 1.a-priori range of physically plausible thermal models 2.constraints from thermal data (heat flow) 3.randomly generated thermal models 4.converting thermal models into seismic models 5.finding the ensemble of acceptable seismic models 6.converting into ensemble of acceptable thermal models

20. Lithospheric structure of the Canadian shield Thermal data: heat flow Computation of end-member crustal geotherms Extrapolation of temperature bounds over a large area Conversion into seismic velocity bounds

21. Inversion with the seismic parameterization seismically acceptable models

22. Inversion with the seismic parameterization seismically acceptable models

23. Inversion with the seismic parameterization seismically acceptable models

24. Thermal parameterization of the old continental uppermost mantle

25. 3D temperature model of the uppermost mantle

27. Lithospheric thickness and mantle heat flow Power-law relation between lithospheric thickness and mantle heat flow is consistent with the model of Jaupart et al. (1998) who postulated that the steady heat flux at the base of the lithosphere is supplied by small-scale convection.

28. Conclusions 1.Seismic surface-waves and surface heat flow data can be reconciled over broad continental areas, i.e., both types of observations can be fit with a simple steady- state thermal model of the upper mantle. 2.Seismic inversions can be reformulated in terms of an underlying thermal model. 3.The estimated lithospheric structure is not well correlated with surface tectonic history. 4.The inferred relation between lithospheric thickness and mantle heat flow is consistent with geodynamical models of stabilization of the continental lithosphere (Jaupart et al., 1998).

29. 3D seismic model