Download presentation
Presentation is loading. Please wait.
Published byMaximillian Barber Modified over 9 years ago
1
Wind Energy Technology: A Global Opportunity for our Environment, Economic Development and Energy Security Randall Swisher Executive Director (Retired) American Wind Energy Association
2
Presentation Overview ●Electric Industry Basics ●Wind Technology Basics ●A Brief History ●Wind’s Current Market Status ●What is Wind’s Potential? ●What are the Challenges?
3
Electric Industry Basics Electric Industry Basics
4
Sources of U.S. Electricity 2008 Share of Net Generation by Energy Source* ●Coal: 48.5% ●Natural Gas: 21.3% ●Nuclear: 19.7% ●Hydropower: 6.1% ●Wind: 1.4% ●Petroleum: 1.1% ●Other: 1.9% *Source: U.S. Energy Information Administration What is the common characteristic of these generating sources? What role does each play? Regional differences? Operational characteristics?
5
Power System Operations Supply and demand must match at all times Demand and supply are both variable and uncertain. Grid operators hold generation in reserve: Regulation reserves Load-following reserves Contingency reserves Reserves are shared for all sources of variability
6
Wind Technology Basics
7
What’s Inside a Nacelle?
8
Advances in Power Electronics ●Modern wind turbines are equipped with power electronics. ●They process over 200 types of data, from wind speeds and oil temperature to voltage dips on the grid. ●An entire wind farm can be monitored from a laptop.
10
Bottom Line: 1981-2000 = 124x the energy, 20x the cost ; 20 Years of Wind Technology Development Economies of Scale Drive Down Wind Cost
11
Today’s Turbines are Big! ●Hub Height: 60-100 meters (197-328 feet) ●Rotor Diameter: 70-100 meters (230-328 feet) ●Total Weight of Turbine: 230 - 340 tons
12
How big is a V80 2.0 MW This picture shows how big a V80 2.0 MW is compared with a Boeing 747 JUMBO JET
13
How much Electricity does a 1.5 MW Wind Turbine Produce? ●A 1.5 Megawatt (MW) wind turbine should generate about 5 million kWh annually.* ●Using national averages, that is equivalent to the electric needs of about 500 homes. *35% capacity factor
14
Power in the Wind (W/m 2 ) Density = P/(RxT) P - pressure (Pa) R - specific gas constant (287 J/kgK) T - air temperature (K) = 1/2 x air density x swept rotor area x (wind speed) 3 A V3V3 Area = r 2 Instantaneous Speed (not mean speed) kg/m 3 m2m2 m/s Bottom Line: 12 mph wind has 70% more power than 10 mph wind
15
The Wind Industry: A Brief History
16
In the 1980s, the U.S. led the World in Wind Technology ●The first successful windfarms were established in 1981 in California ●Many U.S. turbine manufacturers were established in the early 80s ●By 1989, the U.S. was home to 90% of the world’s installed wind capacity – almost all in California
17
But We Turned our Backs on the Opportunity ●The DOE Wind R&D budget was cut 90% through the 1980s ●The wind investment tax credit was abruptly ended in 1986 Most U.S. turbine manufacturers went out of business No new U.S. wind market emerged until 1997 – Iowa and Minnesota
18
Europe Took the Lead in the 1990s ●Strong market incentives in Denmark, Germany and Spain led to a thriving turbine manufacturing industry Germany was the largest single market until 2008 This European leadership made possible wind’s current competitiveness
19
Today, the Global Industry has Three Key Markets ●Europe – 66,000 MW (end of 2008) Most manufacturers based in Europe ●North America – 27,500 MW The U.S. is now the largest single market, and all major global companies want to participate ●Asia – 25,000 MW Chinese market growing most quickly, and establishing a strong manufacturing base
20
2009 Market Outlook The U.S. Wind Market Today
21
U.S. is World Leader in Wind Power With over 31,OOO MW, the U.S. is now the #1 wind energy producer in the world
22
U.S. Leads World in Installed Wind Capacity The U.S. overtook Germany in 2008 with the most installed wind power capacity Source: AWEA
23
5,000 MW 10,000 MW 15,000 MW 20,000 MW 25,000 MW Annual Additions Cumulative Capacity 2008 Installed: 8,545 MW 2008 Total: 25,400 MW Record Breaking Installation and Growth Source: AWEA Ten year annual average growth rate of 29%
24
Percentage of Generation Added by Year Wind is #2 source for past four years 8,558 MW added in 2008 42% of all new generating facilities added in 2008 were wind power plants
25
U.S. Wind Power Capacity (MW) Alaska 3 California 2,517 Colorado 1,068 Iowa 2,790 Minnesota 1,752 New Mexico 497 North Dakota 714 Oregon 1,067 Penn. 361 Texas 7,116 Wyoming 676 Washington 1,375 South Dakota 187 Oklahoma 708 Illinois 915 Ohio 7 Kansas 815 Wisconsin 395 Michigan 129 Hawaii 63 WV 330 New York 832 VT 6 Tennessee 29 Total 25,170 MW Nebraska 73 MA 5 Montana 272 Idaho 75 NJ 8 Utah 20 Under 100 MW 100 MW-500 MW Over 1,000 MW Missouri 163 Indiana 131 Maine 47 NH 25 RI 1 Source: AWEA, January 2009
26
Market Drivers Contributing to Wind’s Growth ●Economics - Wind competes well in many regions ●Federal and State Policies ●Wind’s Environmental Benefits ●The New Energy Economy - Jobs ●Public Support ●Other major generation sources constrained Coal’s carbon risk Gas price volatility Nuclear capital costs/perceived risk
27
Source: FERC, Increasing Costs in Electric Markets, 2008 Wind Power is Cost-Competitive Estimated Capital Cost of New Generation
28
Cost of Energy: Standard & Poor’s, 2007
29
Interconnection Queues Are Clogged with Wind Projects: Nearly 300 GW! 2008 Wind Market Report; LBL
30
Growing the Wind Industry: What’s the Potential?
31
20% Wind Energy by 2030 The U.S. possesses sufficient and affordable wind resources to obtain at least 20% of its electricity from wind by the year 2030. U.S. Department of Energy, May 2008
32
20% Wind Energy by 2030 Wind capacity has already doubled in the past three years 8,300 MW -- 42% of new U.S. capacity -- added in 2008
33
Job Projections Under 20% Report Over 500,000 total jobs would be supported by the wind industry Source: U.S. DOE, 20% Wind Energy by 2030
34
CO 2 Reductions From Electricity Sector Source: U.S. DOE, 20% Wind Energy by 2030 0 2006201020142018202220262030 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 No New Wind Scenario CO 2 emissions 20% Wind ScenarioCO 2 emissions USCAP path to 80% below today’s levels by 2050
35
Challenges to Achieving Wind’s Potential
36
Key Barriers to Achieving 20% Wind 1.Immediate Need to fix the financial system 2.Need for long-term stable federal policy 3.Need for transmission infrastructure
37
●Need a stable long-term federal policy Long-term federal production tax credit (PTC) Federal renewable energy standard (RES) Climate policy Lack of Stable Policy Inhibits Investment
38
Transmission Infrastructure ●The lack of transmission infrastructure is the single greatest long-term strategic constraint facing the wind industry. ●There is a growing recognition of this barrier by policymakers
39
Link areas with vast supplies of renewables to areas of high electricity demand green power superhighways Improve grid operations Green Power Superhighways
40
●Wind is an energy resource, not a capacity resource ●Take the wind when it blows, rely on the utility’s hundreds of other power plants when it doesn’t ●As wind takes a larger role, the electric system will add more flexible resources... Demand-response Efficient gas-fired turbines Incremental hydro Energy storage ●And it will consolidate control areas and use generating resources more efficiently ●Storage is not necessary to reach 20% wind What do you do when the wind doesn’t blow?
41
Strong Winds are on the Horizon The Future Looks Bright for Wind Power
42
●For additional information: www.awea.org rswisher@awea.org
Similar presentations
© 2024 SlidePlayer.com. Inc.
All rights reserved.