S1: Radmon Sensor (F-disk x12; H-disk x12) ~100 mW/module C1: Hirose connector F1: Flex cable Through CF cylinder L1: Round cable Special 2-3m L2: Round cable “standard” ~40 m C2: Horse Shoe Patch area 2 Receiver Electronics crates VME spec 6U Ethernet E1: Receiver cards E3: VME CPU E2: ADC Tevatron Beam abort D0 Control and monitoring S2: BLM (muon shield x8) L3: BNC cable ~40 m Overview radiation monitoring and Beam abort system D0 SMT SdJ 22 September 2000 L4: L5:
Signal inner diode high gain Signal inner diode low gain Signal outer diode high gain Signal outer diode low gain Temperature sensor +6 V Vcc -6 V Vdd +300 V Vbias inner diode Voffset inner diode +300 V Vbias outer diode Voffset outer diode Electrical screen Woven braid Habia art. Nr (16x5x0.10 SPC) Custom cable Hirose Connecto r On CF Cylinde r On CC Horseshoe L1: Round cable Special 2-3 m Signal: +- 4V, <40 mA Temperature: 5V, 5 A Vcc/dd: +- 6V, <100 mA Vbias: +(50-3)00V, <1 mA Voffset: +-3 V, <1 A 5x Habia 3607 ST2 2x Habia M- WET3001 3x Coated Solid wire 0.15 mm 2 Power ground 2x Coated Solid wire 0.04 mm 2 Robinson Nugent P50-034S-RR1-TG Connector 500 VDC, 0.5A/contact
Signal inner diode high gain Signal inner diode low gain Signal outer diode high gain Signal outer diode low gain Temperature sensor +/-6 V Vcc +300 V Vbias inner/outer diode Voffset inner/outer diode Shielded twisted pair “Standard” cable On CC Horsesho e In counting house L2: Round cable “Standard” ~40 m Robinson Nugent P50E-034P1-SR1-TG Connector 500 VDC, 0.5A/contact Robinson Nugent P50-034S-RR1-TG Connector 500 VDC, 0.5A/contact Belden individually shielded twisted pairs NEC/CEC=CMP (UL910)