Tate Bischoff & Joe Osborn.  Axial load of 500lbs  2in diameter shaft.

Slides:

Advertisements

Similar presentations

Chapter 3 – Stress and Deformation Analysis (ref MCHT 213!!)

Advertisements

Bending Moments A bending moment exists in a structural element when an external force is applied to the element so that the element bends (or wishes to.

Design of Shaft A shaft is a rotating member usually of circular cross-section (solid or hollow), which transmits power and rotational motion. Machine.

DESIGNING OF SHAFTS.

More Discussions of the Flip Axle (Continued on “Flip Axle” Report #1 by Andy Stefanik) PPD/MD/ME September 08, 2008 Edward Chi.

Entrance Assessment Prepared by Prof. Marcia C. Belcher, PE Elements of Structures.

Load Cell Analysis Yield Loads: –Axial: 40 lbs –Torque: 30 in-lbs –Pure Horizontal Load: 200 lbs –Off-Axis Torque: 65 in-lbs –Horizontal Force 2” from.

ME221Lecture 281 ME 221 Statics Lecture #28 Section 7.4.

Combined Loadings Thin-Walled Pressure Vessels Cylindrical Pressure VesselSpherical Pressure Vessel.

MECH303 Advanced Stresses Analysis Lecture 5 FEM of 1-D Problems: Applications.

ENGR 220 Section 6.1~6.2 BENDING.

Structure Analysis I. Lecture 8 Internal Loading Developed in Structural Members Shear & Moment diagram Ch.4 in text book.

Professor Joe Greene CSU, CHICO

ME221Lecture 271 ME 221 Statics Lecture #27 Section 7.4.

Biaxial Bending AISC Chapter H

Structural Form The part of a structure that must transmit applied loads is the structural system. The mode of transmission is a function of geometrical.

Copyright © 2011 Pearson Education South Asia Pte Ltd

Beams Beams: Comparison with trusses, plates t

PROBLEM-1 State of stress at a point is represented by the element shown. Determine the state of stress at the point on another element orientated 30

SHEAR AND MOMENT DIAGRAMS WITH APPLICATIONS IN TWO ORTHOGONAL PLANES

PIPE FEA USING ANSYS.

Beams – Internal Effects The external load applied to a beam can cause changes in the shape of the beam, it can bend for example. We do not want.

Chapter 9.5 Method of Virtual Work: Beams and Frames

CASE STUDY – Combined Loading Drill bit isolators for underground mining – all metal components and elastomer must be safe! Design requirement: 8,000 lb.

PROBLEM mm x y 800 mm P = 1500 N z y 50 mm 100 mm

Conventional Weld Calculation

Project Proposal 2 Tangent Tube Slip Spacer. GOALS Determine the maximum load which the Tangent Tube Slip Spacer(TTSS) Can Support Suggest improvements.

ERT 348 Controlled Environment Design 1

Mechanics of Materials – MAE 243 (Section 002) Spring 2008

Keys and Coupling Many Types of Keys and couplings, however understand how Torque is transferred in between each, and forms shearing stresses.

MAE 343-Intermediate Mechanics of Materials QUIZ No.1 - Thursday, Aug. 26, 2004 List three possible failure modes of a machine element (5points) List the.

Strength Resistance to failure. Strength Types 1.Compressive strength 2.Tensile strength 3.Flexural strength 4.Shear strength 5.Torsional strength 6.Bond.

Pure Bending of Straight Symmetrical Beams

Mechanics of Materials – MAE 243 (Section 002) Spring 2008 Dr. Konstantinos A. Sierros.

Strength of Materials Outline Overview AXIALLY LOADED MEMBERS THIN-WALLED CYLINDER GENERAL STATE OF STRESS PLANE STRESS + MOHR’S CIRCLE PLANE STRAIN +

How Bridges Respond to Loads

Forging new generations of engineers

Finite Element Analysis of the18 Turn Beam H. F. Fan November 5, 2004.

Or Would that be Concentration Stress?

Main Steps of Beam Bending Analysis Step 1 – Find Reactions at External Supports –Free Body Diagram (FBD) of Entire Beam –Equations of Force and Moment.

CHAPTER OBJECTIVES To show how to transform the stress components that are associated with a particular coordinate system into components associated with.

COMBINED LOADING.  Analyze the stress developed in thin-walled pressure vessels  Review the stress analysis developed in previous chapters regarding.

Mechanics of Materials

Center of Gravity The balance point of an object.

Copyright Kaplan AEC Education, 2005 Mechanics of Materials Outline Overview AXIALLY LOADED MEMBERS, p. 262 Modulus of Elasticity Poisson’s Ratio Thermal.

Unit-5. Torsion in Shafts and Buckling of Axially Loaded Columns Lecture Number-3 Mr. M.A.Mohite Mechanical Engineering S.I.T., Lonavala.

Main Steps of Beam Bending Analysis Step 1 – Find Reactions at External Supports –Free Body Diagram (FBD) of Entire Beam –Equations of Force and Moment.

DELIVERING INFORMATION ON DEMAND V E R I D I A N E N G I N E E R I N G DIVISION DIVISION Aeronautics Sector V E R I D I A N E N G I N E E R I N G DIVISION.

Overview of Loads ON and IN Structures / Machines.

Deflection and Stiffness

CASE STUDY – Combined Loading

Horizontal Shear Stress in Beam

ES2501: Statics/Unit 20-1: Internal Forces in Beams

New Chapter-- Fundamentals of Dimension Determination A Combined Chapters of 4, 6, 8 and 17 Mainly use the Teaching Notes.

INTERNAL FORCES AND FORCES IN BEAMS

Theory of Simple Bending

DEPARTMENT OF MECHANICAL AND MANUFACTURING ENGINEERING

Structure Analysis I Eng. Tamer Eshtawi.

Centroid 1st Moment of area 2nd Moment of area Section Modulus

DESIGNING OF SHAFTS.

Concrete is Brittle It fails (cracks) at the angle of principal tension.

EML 2023 – Stress Analysis Lecture 1 – Stress State.

DEPARTMENT OF MECHANICAL AND MANUFACTURING ENGINEERING

Internal Forces.

Forging new generations of engineers

Topics Since Exam 2 Shear and Moment Diagrams Torsion Bending

Copyright ©2014 Pearson Education, All Rights Reserved

Mechanics of Materials Engr 350 – Lecture 39 What’s On the Final Exam?

Transverse Shear Objective:

Presentation transcript:

Tate Bischoff & Joe Osborn

 Axial load of 500lbs  2in diameter shaft

 12in long, 2in diameter shaft  Shear load of 500lbs creates a 6000in-lb bending moment at wall

 500lb force applied 6in away from neutral axis of beam creates a 3000in-lb torsion moment

 Combining all the independent loadings into one analysis

Hand CalculationsCATIA FEA ResultsPercent Difference Axial Loading Bending Moment Torsion Combined As can be seen from the table above, CATIAs finite element analysis matches very closely with the hand calculations for each of the loading situations as well as the combined loading.