Use USB_DAQ to Complete the Calibration of PGA309 EVM Iven Xu Feb. 6 th,

Agenda USB_DAQ and PGA309 EVM overview Calibration principle of PGA309 EVM –Sub-bullet here Three output mode of PGA309 EVM –4-wire voltage output mode –3-wire voltage output mode –Current output mode Multi-Calibration principle of PGA309 2

3 a) 4-wire voltage output mode

a) 4-wire voltage output mode: PGA309 EVM Default Configuration 4

a) 4-wire voltage output mode: USB_DAQ Board Default Configuration 5

a) 4-wire voltage output mode: Windows 7 Attention Default GUI Interface 6

a) 4-wire voltage output mode: 7

8

9

10

a) 4-wire voltage output mode: 11

a) 4-wire voltage output mode: 12

a) 4-wire voltage output mode: 13

a) 4-wire voltage output mode: 14

a) 4-wire voltage output mode: 15

a) 4-wire voltage output mode: 16

a) 4-wire voltage output mode: 17

a) 4-wire voltage output mode: 18

a) 4-wire voltage output mode: 19

a) 4-wire voltage output mode: 20

a) 4-wire voltage output mode: 21

a) 4-wire voltage output mode: 22

23 b) 3-wire voltage output mode

b) 3-wire voltage output mode: 24

25 c) Current output mode

c) Current output mode: 26 USB DAQ Configuration

c) Current output mode: PGA309 EVM Configuration * When we want to use current output mode of XTR117: * we should make sure the configuration of PGA309 is in 4-wire voltage output mode; * Because in 3-wire voltage output mode of PGA309, we should turn on/off the Vs of PGA309. But in 3-wire mode, the one-wire and Vout is connect in one junction, so we cannot use one-wire to control the Vs (turn on/off). * conclusion: is we should use 4-wire voltage output for current output. 27

c) Current output mode: 28

c) Current output mode: 29

c) Current output mode: 30

c) Current output mode: 31

c) Current output mode: 32

c) Current output mode: 33

Thanks! 34