WISWIS M. Mehdi Ouaret Président de l’association +33(0)

ShopTurn with DMG MORI SEIKI Machines

Example 1: Taper shaft Learning objectives This section will explain the first steps to create a workpiece in detail. You will learn how to... ● create and manage programs; ● call tools; ● enter traversing paths; ● create any contours with the contour calculator; ● rough and finish contours; ● create a thread undercut, ● thread and

Example 2: Input shaft Learning objectives In this section you will learn the following new functions. You will learn how to... ● perform face turning; ● work with the contour calculator (advanced application); ● machine residual material.

Example 3: Guide shaft Learning objectives In this section you will learn the following new functions. You will learn how to... ● create any blank; ● perform stock removal of the difference material between the blank and the machinedpart; ● drill on the front face; ● mill on the front face;

Example 4: Hollow shaft Learning objectives In this section you will learn the following new functions. You will learn how to... ● perform internal machining on workpieces; ● work with the work step editor; ● create an undercut and ● an asymmetrical groove.

Example 5: Plunge-turning Learning objectives In this section you will learn how to use the plunge-turning functions.