AIDA 3rd Annual Meeting1 First test of MCM prototype board 1 G. De Lentdecker 2 L. Jönsson 2 U. Mjornmark 1 Y. Yang 3 F. Zhang 1 Université Libre de Bruxelles 2 Lund University 3 Central China Normal University
AIDA 3rd Annual Meeting2 Agenda Background Test setup Current status and future plan
AIDA 3rd Annual Meeting3 MCM on a pad module The Large Prototype TPC Scalable Readout Unit (SRU) Background TLU
AIDA 3rd Annual Meeting4 190 mm 32.5 mm FEC MCM 8.9 mm 25 mm 170 mm 19 cm 17 cm 32.5 mm 25 mm 8.9 mm 12 mm FEC with 8 ALTRO MCM with 8 SALTRO on carrier boards Carrier Board Carrier Board PCB CPLD Pad Module Side views of an MCM Background
AIDA 3rd Annual Meeting5 Background DTC link to SRU XO JTAG SALTRO Proto-MCM board
AIDA 3rd Annual Meeting6 Test setup MCM programmer Oscilloscope Logic Analyzer SRU programmer DAQ PC(DDL based) DAQ PC (Ethernet based)
AIDA 3rd Annual Meeting7 Test setup
AIDA 3rd Annual Meeting8 Current status and future plan Current status: DTC protocol implemented on CPLD (160Mbps) Communication between CPLD and Saltro (Verified by accessing register) Implement Ethernet based slow control path Future plan: Three identical setup at Lund, Brussels and Wuhan Further firmware design (power pulsing and I2C configuration etc) Development of Ethernet based DAQ system Common DAQ integration
AIDA 3rd Annual Meeting9 Thank you !
backup
Two possible way to connect TLU and SRU RJ45 to DTC (only asynchronous mode ) Passive board convert HDMI to LVDS Both need modification of SRU firmware