Lab tests on Mirror Support M.Lenti. Glass robustness Test if mirror glass is robust enough to be supported in a single point (single dowel approach)

Slides:



Advertisements
Similar presentations
Installing Doors & Frames Ref: Handout / Text M. S. Martin Sept
Advertisements

Ruger No.1A – 303 British Improving accuracy.
TWO (2) Installation principles 1. Cabinets need to be installed straight, plumb, and level. 2. The area you are working in is rarely straight, plumb,
RockOn! Canister Integration RockOn! 2009.
All-aluminum mirrors for the MAGIC Cherenkov Telescope
Solidworks: Lesson 4 – Assembly Basics and Toolbox
Observations and next works from the recent tests of the insertion tools of Mini-Drawers at CERN Roméo Bonnefoy and François Vazeille Tilecal Operation.
EuCARD-HFM ESAC review of the high field dipole design, 20/01/2011, Maria Durante, 1/40 EuCARD-HFM ESAC Review of the high field dipole design Fabrication.
WA105 General Meeting at CERN 21 & 22-January-2014 Enrique Calvo Alamillo.
V.I.A. Modeling Guide For Revit Families.
Using the Drafting Workbench R. Lindeke IE Before Entering the Drafting WB Create the Part in Handout: I used a Master Sketch For the Base 2’ary.
Fiber Stretching Instrument Peggy Brown MAT Design Team University of Idaho
Doing The Drafting Thing IE 1225 R. Lindeke. See next slide for variations from text! Lets begin with 1-2 “Box Part” – with some Variants & Dimensions!
Leaf Spring prototype preparation M.Lenti. Reminder Piet’s proposal: two dowels inserted into two mirror holes (vertical alignment); mirror weight as.
RICH 17 m Beam Pipe Mirrors Separate pions from muons
DESIGN OF A TESTING MACHINE FOR MICRO-DEVICES Follow up to Clément Gabry’s master thesis on Structural Resistance of Silicon Membranes 1 12/10/2014CERN.
INFN-LNF / D. Orecchini – S. Tomassini – 06/24-25/2015 CLAS12 – RICH MECHANICS REVIEW SLIDE 1 RICH MODULE INTEGRATION IN CLAS_12 – LAST LAYOUT RICH MODULE.
SAM PDR1 SAM LGS Mechanical Design A. Montane, A. Tokovinin, H. Ochoa SAM LGS Preliminary Design Review September 2007, La Serena.
500um quartz wafer with nominal 200nm deep aluminum lines – these are aligned with the flat at left and have width of 38um and pitch of 40um with 2um gap.
Workshop 14 Automatic Hex Meshing of a Bent Bar
W.O. Miller i T i VG 1 Example Barrel Structures- Disk Primary FEA of Disk Frame Supports FEA of Disk Frame Supports –Structure 2m long with two end plates.
Substrate-Paddle-Base Peter Cooke. Peter Cooke 28 Feb - 1 March VELO PRR2 Substrate- Paddle-Base Substrate Production Paddle – Base – Feet Component.
RICH WG M.Lenti. Outlook Mirror Support Vidyo meeting on June 12, 20, 27 and on July 4 and 11 RICH WG meeting on august 27  Vessel status (see Ferdi’s.
EC front unit status. Outline Conclusions from mechanical prototype and actions taken Status of electrical prototype KIT’s work for TA Dev plan (tests)
CLASSE prototype: mechanical concepts G. De Michele, EPFL-PSI-CERN on behalf of CERN team SLAC, 16 th April, 2012.
Optics lab Grade 10 Science Optics Unit. Station 2 - One Way Mirror Shoe Box Once at this station make sure the following is in place: Materials: (1)
SiD LoI preparation workshop, SLAC 3th March 2009 Spanish Network LoI contribution Iv á n Vila Á lvarez Instituto de F í sica de Cantabria [CSIC-UC]
RADIATION SOURCE Design Review Dmitry Gudkov BE-BI-ML.
Lesson 7 Rectangular Objects. Rectangle Command Rectangles with Vertices on the Origin Start from the origin End at the origin.
Girders fabrication: Difficulties to achieve tolerances and machining process Igor Madariaga (ESS-Bilbao) 13 September 2011 DTL mini-workshop, CERN.
Dmitry Gudkov BE-RF-PM CLIC Module Working Group Engineering design of the adjustable supporting system for DBQ.
Baby MIND coil modules assembly the aluminium folded strip solution 1 Alexey, Philippe, Gabriella, Helder, Herman Baby Mind Magnet CERN June.
MICE RFCC Module Update Allan DeMello Lawrence Berkeley National Laboratory MICE CM29 at RAL, UK February 17, 2011.
WS12-1 VND101, Workshop 12 MSC.visualNastran 4D Exercise Workbook Bike Release Lever.
Chapter 10 Magnets. All magnets have the following common properties:  Magnets always have two opposite “poles,” called north and south.  If divided,
RICH WG: Introduction M.Lenti. Outlook PMs and sockets: what we have Vacuum vessel, no Neon purification Cost of aluminum disks (raw material) Cost of.
General News M.Lenti. Outlook Reminder of the RICH schedule PMs and sockets: what we have Mirrors What would change for PM holding disks if vacuum inside.
19 January 2006VELO installationEddy Jans 0 VELO-installation meeting CERN, January 17, 2006 preparation IP8-area SX8 moving SX8 -> IP8.
We have to fix the design of the flanges on the 1 st horn frame to which the target support beams are attached.
How to Build a Divider Wall By Charysse Roberson.
3D Design Precision Measurement Creating Holes Types of Edges The Offset Tool Copy and Paste Roof Types.
A valve must be used to control water flow from ablution hose. Sample drawing for 6270 WC pan. ABLUTION HOSE APPLICATIONS.
Learning Objectives • Create sweep features. • Create lofted features.
Registering for Classes Updated: 11/18/2015. Step 1: Regis Homepage 1.Click “Student Life” 2.Choose “Current Students” on the right side.
Three View Drawing Technical Drawing and Design Osbourn Park High School Mrs. House.
LAUNCH X improvements. LAUNCH ©Auto Testing Division Content Sensor headProgrammeTarget dataClampsCabinetTurn table, Side slip.
- PROPOSAL FOR A SOLUTION OF A “STRAW MODULE” INTEGRATION - INFN-LNF - SPAS -STRAW MODULES INTEGRATION- INFN-LNF-SPAS- December D. Orecchini – P.
WP F/L Dom production. KM3Net meeting 2012 Erlangen - Edward Berbee - Nikhef22/06/20121.
Specifications Asic description Constraints Interface with PDM board Planning Summary.
Test on mirror support prototypes M. Lenti. News from MARCON Shipping at CERN of all the mirrors: end of 2010 – beginning of dummy segments ordered.
Safety Mr. Colby – Technology Education. What is Manufacturing?  Manufacturing is using Materials and Processes to make a Product.
1.To begin click: File, New, then select Design 2.Next draw a rectangle. 3. Use the measuring tool to dimension the sides to 150mm by 75mm 4. Change to.
Mechanical robustness & associated tension at the DSSD slant part connection Mar-5 th 2013 B2GM KEK S. Uozumi (KNU), T. Tsuboyama, N. Sato (KEK)
Date of download: 9/19/2016 Copyright © 2016 SPIE. All rights reserved. Schematics of the 3-D printed probe for tissue collagen differentiation. (a) The.
First Wall Panel - Overview
Ferrara MECHANICAL SUPPORT for forward tracking detectors Federico Evangelisti INFN - Ferrara GSI – 2-6 march 2009.
Ladder Assembly All tools and jigs produced Glue dispensing works
VELO-installation meeting CERN, January 17, 2006
- STT LAYOUT - SECTOR F SECTOR A SECTOR B SECTOR E SECTOR D SECTOR C
Ladder Assembly All tools and jigs produced Glue dispensing works
Ongoing and to do work M.Lenti.
Prototype Vertex Detector
Interferometric measurements on mirrors
Laser engraving machine the light path adjustment
How to align lightlever optics
Mounting a BalanceBox®650 to a brick wall
McMaster linear bearing #6709K180 with guide rail suppressed
Internal Suture Augmentation Technique to Protect the Anterior Cruciate Ligament Reconstruction Graft  Mohamed Aboalata, M.D., Ashraf Elazab, M.D., Abdelsamie.
Presentation transcript:

Lab tests on Mirror Support M.Lenti

Glass robustness Test if mirror glass is robust enough to be supported in a single point (single dowel approach) Used first an available pre-series mirror (w/o central hole), supporting it through one of the lateral hole (turned 90 deg) 6/04/20112M.Lenti

Mirror supported in one point Turned 90 deg Single dowel Left in place for a couple of days: no mechanical crack no optical deformation 6/04/20113M.Lenti

Next text: add a weight 20 Kg W disk on top of the glass Left in place for a couple of days: no mechanical crack no optical deformation 6/04/20114M.Lenti

Check again…. Unplug the mirror…. No crack close or inside the hole Turn the mirror by 180 deg, use the other side hole, play again No damage 6/04/20115M.Lenti Anticorodal aluminum dowel

Dummy mirrors Marcon prepared 4 “dummy” mirrors Same dimensions, same glass, same holes as true final mirrors (central hole present) These dummy are also transparent (true mirrors opaque on the back) Use dummy mirrors for glass robustness test and for alignment tests 6/04/20116M.Lenti

Dummy mirror No crack well visible 6/04/20117M.Lenti

My proposal Endorse now the “single dowel approach” for supporting the 18 hexagonal mirrors 6/04/20118M.Lenti

Semi-hex ?? Only two holes (barycenter in between the two holes) A third (central) hole was not drilled (too many holes too close…) 6/04/20119M.Lenti

Semi-hex Proposal to be discussed: two dowels top-down alignment similar to hexagonal mirror but without piezo left-right with a screw in the dowels lodging frame Semi-hex to be aligned once and then left fixed (reference for hex mirrors) Pulling ribbon for top-bottom alignment screw 6/04/201110M.Lenti

Other tests Improving piezo alignement with encoders (see talk by Roberto C.) 6/04/2011M.Lenti11 Use solid state switch software-driven to commute from one piezo to another piezo encoder ribbon

/04/201112M.Lenti 10 μm step of the piezo Spot position on the photodiode Test with aluminum segment: dist. Mirror-phtdiode 700mm Spot position: u → 10 μm →(10μm/700mm)= 15 μrad Piezo 1 Piezo 2 Piezo with encoder in target mode

Conclusions Glass robustness tests passed Proposal to endorse “single dowel” approach for 18 hexagonal mirrors Solution for two semi-hex to be worked-out Piezo+encoders: see Roberto’s talk Mirror support wall: Philippe and Piet presentation on Feb 9, /04/2011M.Lenti13