Emergency Calling System Status Report #8 Group #9 Cem Sahin Jassim Alemadi Eloy Esquivel Vikas Tailor Objective To build an automated emergency call system that will send SMS after the cars airbag deploys. Presented to: August Allo April 16 th 2007
Project Milestones Finish configuring Falcom GSM Module Complete Demonstrate final prototype April 20 th Finish the Final Report May 2 nd April 16 th 2007
Tasks Completed ► Updated website ( ) Complete ► Get more accurate readings from the GPS antenna Complete ► Fixed wiring, drilled holes to mount parts Complete ► mount parts and labeled mounted parts Complete April 16 th 2007
Ongoing/Pending Tasks ► April 19 th Finish the second draft of Final Report ► April 19 th Present project to high school ► April 20 th demo final prototype April 16 th 2007
Upcoming Tasks ► Make a poster for design presentation ► Work on the final draft of the final report ► Get product ready for final demonstration. April 16 th 2007
Pin 10 of GSM module connected to the mechanical switch GSM module 12 Volt Car battery Microphone and Speaker When the mechanical switch is activated, a signal is sent into pin 10 and goes to the module Emergency Module receives signal and initiates algorithm to send SMS. Antenna Two-way communication GPS readings give Latitude and Longitude of the accident GSM module is powered on when the ignition is turned on (PUSH) (TOGGLE)
Schedule