Orthopaedic Trauma Association Protection and/or confidentiality of contents statement, this statement may also include a corporate copyright notice. Intro to IM Nailing Lab Comprehensive Fracture Course
Tibia IM Nail Now we will put into practice what we have learned 2 Models available – “Standard” midshaft fx – Proximal 1/3 fracture Requires additional reduction techniques
Tibial IM Nail Trigen Nail by Smith and Nephew 32 cm nail
Tibia IM Nail Most important part of IMN is obtaining proper start point – (2 nd most important is obtaining and maintaining reduction) Take the time to find correct start point
Tibia IM Nail For tibia – Just medial to lateral tibial spine on AP – In center of anterior tibial slope
Tibia IM Nail Steps – Obtain start point with threaded guide pin – Place pin ~5 cm deep – Ream with cannulated reamer This model is already reamed down the shaft – Place nail but DO NOT interlock at proximal end yet
Tibia IM Nail Distal Locking – SureShot targeting device Place long wire down nail to 32 cm line Utilize targeting screen to line up circles concentrically Drill through central hole with 4.0 mm drill while holding hand still Place interlocking screw 3 distal holes available
Tibia IM Nail Once distal targeting screws placed… REMOVE SURE SHOT WIRE Then place proximal interlocks
Tibia IM Nail Proximal 1/3 model – Need to find “correct” start point Hint- not the pre drilled one on model – Will need reduction aids- Clamp Unicortical plate Blocking screws Combination
Tibia IM Nail Your table instructors will help you out Please thank our representatives from Smith and Nephew for providing: – Equipment – Labor – Expertise