Set Construction Essential Question:

Slides:

Advertisements

Similar presentations

Hoop House Construction. Parts of the hoop house Frame Hoops Braces Plastic cover.

Advertisements

Mr. Bartosh Technical Theatre I

Installing Doors & Frames Ref: Handout / Text M. S. Martin Sept

TIMBER JOINERY.

Cabinet and Countertop Installation

Building materials-- WOOD

Michael Long– Eagle Project - Exhibit D-1 Plans/Drawings – Top View

Optimum Round Pool Instructions. Prepare the pool site Remove all the grass on a surface 2’ wider than the size of the pool Level the ground.

TWO (2) Installation principles 1. Cabinets need to be installed straight, plumb, and level. 2. The area you are working in is rarely straight, plumb,

CONSTRUCTION OF A “LITTLE FREE LIBRARY” Gary Mehlum, pressed into service by wife and UHLS employee Mary Fellows (“When you marry a librarian, you marry.

Materials QtyLWHDescription 28’X4’X15/16”Plywood (15/16” is also known as ¾”) 88’X2”X1”Lumber – Pine 16Home Depot 5 Gal Bucket 48’Rolls of hook and tie.

MINI BOX. STANDARD BOX MAGNUM BOX SPINDLE ASSEMBLY.

DRAWING A FLOOR PLAN APPLICATIONS OF TECHNOLOGY. WHAT IS A FLOOR PLAN? A floor plan is a technical drawing of a building with the roof removed as seen.

Lone Star Region National Model Railroad Association “The Shack” Scratch Build -Mike Jobe.

All About Flats By Samantha Lee. What is a flat? Theatre flats are large pieces of constructed and painted wood that are placed on the stage to serve.

Burglar Alarm Leaving Certificate Technology. Parts List.

How to Construct a Paper Airplane. Start Small Plane: Tear.

Specification section 3.3

Common Woodworking Joints

 Key Learning ◦ There are many important factors to take into consideration when choosing the type of lumber.  Unit Essential Question ◦ What considerations.

Cabinet Making 101 Julian Gonzalez El Toro High School Teacher-Woodworking.

Drafting Rear Elevations. Start with outer frame when drafting standard flat. Heights are generally in multiples of 2’-0”. Outer Frame.

Mini Flat Journal Prep Pg. 37 1)Cut the All About Flat notes. 2)Fold in half. Glue the Top part of Title down. 3)Place at the bottom of the page. 4)Leave.

CONSTRUCTING A FIVE CABIN LATRINE

Week 9 Drafting Interior Elevations and Sections.

How to build raised garden beds for small space gardening How to build a raised garden bed, which tools, material and skills needed. How much does it cost.

6.13 The student will a) estimate angle measures, using 45°, 90°, and 180° as referents, and use the appropriate tools to measure the given angles b) measure.

Lone Star Region National Model Railroad Association “The Shack” Scratch Build -Mike Jobe SESSION 2.

Setting Out Joiners Rods “extracts from Practical Australian Carpentry” M. S. Martin Original 2005 Revised 2008.

Wall and Ceiling Construction

1. b. Rip Saw 2. d. Used for cutting with the grain.

BE PREPARED TO TAKE A FEW NOTES TODAY… Pick up the pink sheet at the front.

Building the Footstool P R O J E C T O V E R V I E W.

Wood Construction Materials Hardwood Comes from deciduous trees such as oak, birch, walnut, maple, and hickory.

Detailing References: Jefferis, A. & Madsen, D. A. (2005). Architectural drafting and design (5 th ed.). Clifton Park, NY:Thomson. Allen, E. & Iano, J.

INTD 54 other components. moldings cover, enhance and decorate a plain surface standing trim: fixed length—doors & windows.

UNIT PROJECT #3 INTRODUCTION Day 2 Day 3 Day 4 Day 5 Day 6 Day 7 Day 8.

Materials Lists Preparing to Build. Materials List  Complete list of all supplies needed to complete the project  Must be detailed  Dimensions of materials.

Stage Construction Theatre Workshop I. The Stage Crew  Set construction crew- build the set  Set designer- creates the design/idea for the set that.

Scratch Build a Water Tower

Drywall Theory. Dry Wall Saw Dry wall T-Saw Dry Wall Lift.

Wood Construction CTC-375.

Final Assignment Air Car Chassis Design using Sketchup.

Cabinets -2- Cabinet Details & Joinery. Construction Joints u Used to increase strength u Improve looks u Complex joints more common in higher quality.

Wood Joints and clamping. Wood Joints “joints”…this term is used to describe the close securing or fastening together of two or more smooth, even surfaces.

Chapter 23: Structural Drafting

How to Build a Divider Wall By Charysse Roberson.

Bridge Project. Materials – 8 pieces of wood, glue, cutters, masking tape and a ruler.

Make a Model A box company makes boxes to hold popcorn. Each box is made by cutting the square corners out of a rectangular sheet of cardboard. The rectangle.

The cutting list should contain the following data: 1. PART No. I.e. 1, 2, 3, etc. 2. NAME a description of the part, eg. top 3. QUANTITY required, e.g.

Building Boxes What is the largest volume open top box that you can build from an 8 ½ by 11 inch sheet of paper?

 Water  Flour  Newspapers  Simply mix together 1 part flour and to 2 parts water. You would want it to be the consistency of thick glue, but you.

Monolith Collection and Preparation For soils without restrictive layers Conrad Neitsch USDA-NRCS MLRA Region 9 Staff Temple, TX.

Drafting TV Flats.

Balsa Bridge Construction

Woodworking Joints. Joinery Joinery is the part of Woodworking that involves joining pieces of wood together Some require fasteners, adhesives.

Wood Construction Materials Hardwood »Comes from deciduous trees such as oak, birch, walnut, maple, and hickory.

Place template on top as guide for cutting

A TUTORIAL FOR SUCCESSFULLY MATTING STUDENT ART

Do Now #7 What are the dimensions of the footing?

Kerry J Donovan Furniture Design

DOOR &WINDOW DEPT. OF CIVIL ENGINEERING By Mr. M. M. MASKE.

Building a Nightstand Woods 1 Final Project Step #1

Building Construction I Sofia Sebastian 1

Louisiana Tech University

THINK 2014 Training DIFFERENTLY DECORA MASTERBRAND CABINETS

Building Construction I Sofia Sebastian 1

Common Components of a Traditional Wood Framed Building

SUPPORT FRAME ASSEMBLIES, 4 REQUIRED

What We Do Hillphoenix, a leading industry innovator has dedicated the necessary resources to develop a new Walk-Ins Division. The result, Hillphoenix.

Presentation transcript:

Set Construction Essential Question: What will I need to apply when building a set for a play?

Vocabulary Flat Wood screws Muslin Sheeting material Backing (masking) Box set Floor plan

Vocabulary Practical Returns Sight line

Flat Construction Made of 1 x 4 white pine. Components are called Corner blocks, and keystones Rails and stiles and toggle bars Use wood screws to attach corner blocks and keystones Covered with unbleached muslin

Flat: Illustration Rails Stiles Toggle Bar Keystone Corner block

Flat: Measurements Stile measurements are all in terms of 5” For example, a 12’ high flat needs stiles of 11’5”. Rail measurements are always the width of the flat. For example, a 4’ wide flat needs rails of 4’.

Flat: Measurements Toggle measurements are all in terms of 5”. For example, a toggle bar for a 6’ wide flat should be 5’5”. The length of material to cover a flat should always add 4”. For example, a 12’ high flat needs to be 12’4”.

Flat: Measurements The dimensions for a cornerblock are 9” x 9”. The dimensions for a keystone are 6” x 3” x 2.5”.

Flats: Covering and sizing How to cover a flat Unbleached muslin 4” in length Staple it to sides of frame Place wax paper around toggle bars Cover muslin, including what covers the wood frame with glue/water mixture 2:1 ratio Sizing Let dry, remove staples and cut excess

Flats: Miscellaneous Corner blocks and keystones should be placed 3/4” from edge of flat. Flats are joined with loose pin hinges.

Flats: Miscellaneous Dutchman is used to cover the joints between flats. To patch a hole or rip in a flat, material is glued from the back of the flat. Only flats without openings may be floated.

Flats: Miscellaneous Everyone involved with a production works on the set. It is necessary to use a backing flat on all door and window openings.

Flats: Miscellaneous A brace should be used to keep a flat upright. A stage weight should be placed inside a brace to give weight to the flat. The portion of the set which extends toward the right and left wings is called the return.

Sheeting Material Three kinds of sheeting material: Celotex Masonite Particle Board Plywood In relation to plywood, the letters AD means one side is planed, the other is not.

Sheeting Material In wood measurement, nominal means size before planed. Actual means size after planing. Corner blocks and keystones are made from ¼” plywood. The standard size of all sheeting material is 4 x 8. Other plywood thicknesses are 1”, ¾”and ½”.

Cutting Corner block 9” Keystone 9” 3” 6” 2.5”

Attaching: Corner Blocks

Attaching: Keystones