TRAILER AND WINCH SOLUTIONS LTD

Manufacturing- Cutting Amada 6mm x 3 meter Capacity CNC/Manual Guillotine Amada 10mm Capacity Laser Cutter Manual and auto feed Horizontal Band Saws with 350mm Capacity

Manufacturing- Punch and Press Kingsland 60XA Punch/Metalworker Amada Pega 357 and AC255 CNC Punches with 6mm Capacity Press and Shear APHS 2609 x 90 CNC Press Brake Press and Shear APHS 3106 x 120 CNC Press Brake

Manufacturing- Welding & Cutting Mig Welding for Mild and Stainless Steel Welding approved to BS EN Tig Welding facilities for Mild Steel, Stainless and Aluminium Oxy-Acetylene Straight Line Profile Cutter Oxy-Acetylene Hand held profile cutting

Manufacturing- Machining Radial Arm Drill with 60mm diameter capacity Multi-spindle Drill with 13mm diameter capacity Colchester Triumph 2000 Manual Lathe XYZ Vulcan 1010 CNC Milling Machine XYZ Vulcan 250 CNC Lathe

Manufacturing- Tube Bending Hilmor Semi Automatic 32mm Mandrel Tube Bender. Production 22mm diameter bending 30mm dia, 16mm diameter and 25mm square production bends

Manufacturing- Finishing Kremlin 34A Flowmax Air Mix Spray System Wagner Airless Spray System Dry Back Spray booth We also offer a complete coating solution with Shot Blasting, Galvanising, Zinc Plating and Powder Coating options arranged on a sub-contract basis

EEC Cable Drum Trailers The UK Highway High Speed range of Cable Drum Trailers are build to EEC directives and equipped with service brakes and road lighting. Drum lift is via an hydraulic pump independently acting on 2 lift rams. These Cable Drum Trailers are sturdy in construction and as such can also be used on site, often with bonus loadings CDT5.25 CDT2.4 CDT1.55 CDT2.8

Site Cable Drum Trailers Our Site Range of Cable Drum Trailers are similar in construction and operation to the EEC range but the Braking and Lighting systems are not in line with EEC requirements. The Site range of Cable Drum Trailers are generally of higher carrying capacities to the EEC range (Upto 50 tonnes) and used on UK sites where lights and braking system are required, this range is also often used on highways in many Countries outside the EEC, particularly in the Middle East CDT10.0S

Bespoke Cable Drum Trailers In addition to the EEC and Site ranges, we also offer a Bespoke Range of Cable Drum Trailers where you the customer tailor the specification to suit the contract, drum capacity or budgetary requirements. You make the choices, service brakes, park brake or no brakes, hydraulics lift or rigid construction, lighting/no lighting, suspension/no suspension, mudwings fitted or not etc. The unit illustrated is a 8 tonne unit with no suspension but fitted with lights and service brakes

Trailer Optional Extras We over a large range of Trailer options including Light Guards, number plate holders, Drum Brakes, Drum Guards and Drum Drive Units to name but a few

To dramatically reduce freight costs, we can supply trailers in knock down form to enable them to fit in a container or on a standard tautliner trailer Export Knock Down Trailer

Trailer Refurbishment Due to capital expenditure restraints or limited budgets, TWS Ltd not only get involved in the manufacture of new Cable Drum Trailers, we also repair and refurbish trailers (of any make or model) from your existing fleet, what you may think as scrap or beyond economical repair can in reality be a unit that will give you years of trouble free service. Below are before and after photographs of such a project BeforeAfter

Cable Rollers Straight Line Rollers Bend Rollers Lead in/Draw Off Rollers Manhole Entry Rollers

Drum Handling TWS offer a range of Drum Handling Equipment to suit every need ranging from Lightweight Stud poles, Drum Stands and Rotators Medium duty Rotators, Drum Tip Stands and Horizontal 3 tonne Drum Stand (below) Heavy duty Mechanical Screw Jacks upto 8 tonne and Hydraulic Jack Towers upto 50 tonne

Fibreglass Cobra Rodding System Continuous Pipe and Duct Rodding Systems (often referred to as Cobras, Conduit Snakes, Duct Rods or Conduit Rods) gives a compact and labour saving solution whether installing cables in ducts, threading draw ropes through pipes or surveying drains with CCTV cameras. The Cobra’s are a more cost- effective solution to using traditional rather than screw together drain rods.

Cable Grips Cable Grips (also often referred to as Cable Stockings, Pulling Socks or Chinese Fingers) are a quick and efficient way to install/control electrical cables. Cable Grips are re-usable (subject to inspection) and can also be used to support or pull any cylindrical object within their grip and load carrying capacity. The Grips can be supplied in a range of styles and manufactured from different materials including Galvanised Steel, Stainless Steel or high-strength, non-conductive aramid fiber.

Special Products Pole Bogie for transporting wooden poles over rough terrain. Can be supplied with a tow bar for quad or vehicle towing Flat bed Triple Drum Trailer built to customer specification. Each drum is mounted on a turntable and is fitted with a mechanical disc brake Winch operated tilting Cable Drum Trailer fitted with mechanical Drum Brake and built to customer specification Utility flat bed mower/mobile plant trailer

Sub Contract In addition to products built for Cable Handling, TWS Ltd get involved in numerous projects manufacturing items to customer drawings/specifications, a few of which are listed below

TRAILER AND WINCH SOLUTIONS LTD UNIT 5, WELSH CROFT CLOSE, KIRKBY IN ASHFIELD NOTTINGHAMSHIRE, ENGLAND, NG17 8EP TEL – 00 (44) : FAX – Visit our Website- Contact - Colin Davies (MD) Direct Telephone Number 00 (44) Mobile 00 (44)

Over Sea’s Agents Alpha Link Technology Jomy George PO Box-73729, JAFZA, Dubai, UAE Phone: Fax: Mob: Territory: UAE