Lighting and Sunblind Management Configurable Controllers - RCL-Light / Blind Series

ARCHITECTURE Delivering Optimal Lighting… Combined lighting and sunblind control solutions provide appropriate light levels in various workplaces, by modelling and simulating both daylight and artificial light in a cost-effective way. Optimal lighting also creates a comfortable and productive indoor environment, while providing maximum well-being to its occupants… 0% 50% 100%

ARCHITECTURE Maximise energy savings by taking advantage of daylight, opt for controlled dimming and appropriate light levels in all environment to avoid energy wastage! Delivering Optimal Lighting… Of energy savings when combining + light level control + presence detection + occupancy schedule Up to-60%

ARCHITECTURE L ON M ARK certified controllers (L ON W ORKS 2,0, processor FT-5000) for Lighting management (on/off, dimming or DALI) and Sunblinds control (opening, closing and tilting VAC or 24 Vdc motors). Lighting and Sunblind Controllers RCL-Light-4 RCL-Light-8 RCL-Light-4D RCL-Light-8D CTR-DALI-LRx CTR-8LDALI RCL-Blind-4 RCL-Blind-8 RCL-Blind-4LV RCL-Blind-8LV

ARCHITECTURE  Automatic lighting control according to the room luminosity and occupancy on/off, dimming or DALI  Separate control of window side and corridor side luminaires  Intelligent room managers: define scenarios directly from the supervision  Embed demand-response management sequences: comply with SmartGrid systems  Fail-safe mode to ensure the occupants’ security under all conditions  Embed Run hours counting function: enable consumption monitoring by load  DALI Management Enable the operating status and defect detection of each ballast (or group) Cut off the ballasts main power when lights are turned off - additional costs savings!  Configuration made easy : plug-in and Wizard AX  Install directly in ceilings, close to the terminal equipment Lighting Controllers

ARCHITECTURE  Automatic control of 230 VAC or 24 VDC sunblind motors : opening, closing and tilting (angle rotation)  Suitable for all kinds of exterior and interior motorised sunblinds: venetian blinds, sun shades, facade blinds, etc.  Help to minimize heat loss and heat gain by minimizing temperature flow across the windows, prevent glare…  Embedded Intelligent Room Managers that supervise various defined scenarios.  Configuration made easy : plug-in and Wizard AX  Install directly in ceilings, close to the terminal equipment Sunblind Controllers

ARCHITECTURE Inputs and Outputs of each Controller ModelRJ9 InputsOutput TypeNb. of Outputs HVAC, Lighting and Sunblind data transmission to the network L ON M ARK Objects RCL-Light-4 RCL-Light Lights - On/Off 4848 Yes Occupancy Sensor Lamp Actuator RCL-Light-4D RCL-Light-8D 4444 Lights 1-10V Dimming 4848 Yes Occupancy Sensor Lamp Actuator CTR-DALI-LR8 CTR-DALI-LR16 CTR-8LDALI Lights - DALI 32 (8 groups) 64 (16 groups) 16 (8 groups) Yes No Yes - RCL-Blind-4 RCL-Blind Sunblinds VAC 4848 Yes Occupancy Sensor Sunblind Actuator RCL-Blind-4LV RCL-Blind-8LV 4444 Sunblinds - 24 VDC 4848 Yes Occupancy Sensor Sunblind Actuator

ARCHITECTURE  Used respectively with EC-Net AX or LNS-based software (such as Lonwatcher)  Quickly configure all controller parameters  Powerful import/export functionalities to duplicate a controller’s settings for reuse  Download configuration to multiple devices for a large BMS integration Configuration Tools: Plug-in and Wizard AX

ARCHITECTURE ROOM DEVICES - Smart Room Control RJ9, infrared or radio Complementary Products RCL-ITR LON - RJ9 Interface OTHER DEDICATED ROOM DEVICES RJ9, infrared, radio or EnOcean A broad array of models suitable for a wide range of environments and applications. From wired (RJ9) and wireless, battery-less discrete sensors to intelligent communicating sensors: receivers, multi-sensors, room sensors, remote controls,…

ARCHITECTURE Personalised Comfort…

ARCHITECTURE L ON W ORKS Configurable Interface - 4 room managers + 4 RJ9 inputs Interface any Distech Controls’ RJ9 accessory with the L ON W ORKS network Manage any other manufacturer’s lighting or sunblind controller Add 4 RJ9 multi-sensors or room devices using only one node Increase your device capacities Ease of configuration using LNS plug-ins or EC-Net AX Wizard Focus on the RCL-ITR Focus on the MS2 The multi-sensor combines in a single and extra small device: A wireless receiver for communication with a personal remote control A motion sensor for presence detection and occupancy modes management A luminosity sensor (Lux) for automatic control of ambient light level in a room An optional temperature sensor used for fall-back temperature control

ARCHITECTURE PRODUCTSNAMESDESCRIPTION Allure RS-Smart-Sense Room Sensor Device with coloured touch-screen - RJ9 EC-Remote-I, -IT or -R, -RT ECW-Remote Remote Control - infrared, radio or EnOcean (Integrated temperature sensor in option) MS2-I, -P, -PL or -PLT MS2-R, -PL or -PLT Multi-sensor - infrared or radio (receiver, presence detector and/or Lux level sensor, temperature in option) RIR-I RIR-L Infrared Receiver Infrared Receiver with luminosity (Lux) sensor RS-LCD Room Sensor Device with LCD screen - RJ9 RFR-D-ENOCEAN Radio Receiver - 4 channels, EnOcean - Open-to-Wireless TM INT-ENOCEAN Switch, EnOcean - Open-to-Wireless TM Accessories - for RCL-Light / Blind Series

Thank You for Your Attention