Fluke Connect Launch 2016 THAILAND- PRACHINBURI

Agenda of the Fluke Connect Launch Seminar :30am to 9:00am: Registration 9:00am to 10:00am: Introduction Fluke Connect Fluke Connect : Connecting Data and build baseline for PDM 10:00am to 11:00am: Break Out Visiting Booth Demo with Coffee Break 11:00am to 12:00am: Fluke Connect : Connecting Tools Fluke Connect: Connecting People and Data to resolve issues 12:00pm to 1:15pm: Break Out Visiting Booth Demo with Lunch Break 1:15pm to 1:30pm: Lucky Draw 1:30pm to 3pm: Track 1 Breakout: Energy Management Solution(Trainer: Monton) Track 2 Breakout: PDM Solutions(Trainer: Jeremy/Tier Channel) 3pm to 3:30pm: Break 3:30pm to 5pm: Track 1 Breakout: Energy Management Solution(Trainer: Monton) Track 2 Breakout: PDM Solutions(Trainer: Jeremy/Tier Channel)

Flow of the presentation: Track1 Part 1: Introduction of Fluke Connect 1.Current State of CBM: a) Take a measurement of Voltage, Current and temp of the motor system b) Record in paper and then enter into the excel. c) Detect abnormality, they will need to log the data, need a Scopemeter to perform recording. Troubleshooting: a) Use a 179 to take voltage, current and use 62Max to take temp b) Record in paper and then enter into the excel and try to analyze the problem. c) Explain for some machine, need to bypass safety sensor to make measurements d) Need to check intermittent issues, need to get the Scopemeter to record data to visualize. 2.When there is a challenging technical issues, it will take a longer time and higher cost. Might need to engage consultants to fly down from other region resolve the issues 3. Technical Issues Report not well documented and not easily accessible Play Fluke Connect Video on the Tools Features

Safety Reliable Repeatable Rugged Efficiency Fluke Tools provides…. It connects …. Connects Tools together Connects Data to Visualize Faults Connects measured data to Fluke Cloud Storage to build Baseline Connects People to resolve issues efficiently

Track1 Part 2: Fluke Connect : Connecting Data and build baseline for PDM 1.Capture Measure data with 3000FC for Voltage/Current 2.Capture Measure date with T3000FC 3.Capture Measure data with 3001 AC for 3Phases current 4.Show the uploading into Fluke Cloud Server and Analyze the data. 5.Show manual entering of measure data to capture reading from legacy tools. 6.Show Ti400 can capture the data and download to Mobile Phone Remarks: 1. Demo the FC App to be able to build trending data on equipment assets.

Break Out Demo Station

Track2 Part 1: Fluke Connect : Connecting Tools for see more and solve more 1.TI450 with T3000FC+ A3001FC + v3000FC FC + T3000FC + A3001FC 3. IPAD + TI450+ A3001 FC + v3000FC Track2 Part 2: Fluke Connect : Connecting People to resolve issues efficiently 1.Ti450 + A3001FC and Remote Call. In addition we leverage of Wireless to Remote verification and correct PQ connection and using 1738II to further visualize the issues, like harmonics, DIP/Swell…etc.

Demo Station

Break Out Practical Session: Demo Station1: Traditional PDM: Max + Fluke125B + Laptop to record data Fluke Connect Solution: Demo1: 3000FC with PQ Suitcase for measuring Voltage/ Current/Temp Demo2. A3001FC for 3-Phase Current measurement Demo3: TI450 with T3000FC+ A3000FC + v3000FC Demo4: Share-live video and Data Other Display: 1587FC + 376FC + Other FC Kits Demo Station2: PDM Solution with FC(TI/PQ/MECH) Demo1: TI450 Thermal Scanning + TI Report Demo2: Fluke 435II, FPQ Signal Analysis Demo3: Fluke 805/810/802-2/830 Demo

Break Out Practical Session: Demo Station3: Energy Solution with FC Highlight: 1. TI450 on detecting “Hot-Spot” Energy Losses 2. Eliminate Mechanical Problem reduce Energy Consumption with 1730/ Remote Verification of Electrical connection Demo1: 1738 for Energy logging and FC to enable quick and safe check. Leverage on VNC to do Remote coaching and verification Demo2: 435II for Energy Waste detection and Fluke Solution to Resolve energy waste with “Zero Cost”