LEVEL PRODUCTS TRANSMITTERS | SWITCHES | MONITORS |SYSTEMS

LEVEL TRANSMITTERS RADAR AND ULTRASONIC

TRACER 1000™ GWR LEVEL TRANSMITTER FEATURES & BENEFITS Revolutionary TDR (Time Domain Reflectometry) Technology Precise continuous level measurement and reliable point level detection combined in one device Highly robust radar measurement due to a 4-wire design and innovative signal analysis and disturbance signal suppression Fully modular probe design – Simple to install Features HART® Communication protocol Economically Priced Made in USA

TRACER 1000™ 2G GWR LEVEL TRANSMITTER FEATURES & BENEFITS Revolutionary TDR (Time Domain Reflectometry) Technology Auto Calibration to any dielectric Precise continuous level measurement Measures liquids, slurries, and solids Highly robust radar measurement due to an optional 2-wire or 4-wire design and innovative signal analysis and disturbance signal suppression Optional NEMA 7 Enclosure for Class 1 Div 1 areas Measures up to 65 feet Pre-calibrated from factory for easy installation High temperature applications Programmable fail safe mode Economically Priced

TRACER Air™ RADAR LEVEL TRANSMITTER FEATURES & BENEFITS Small antenna size, non-contact radar, rugged design Pre-calibrated for easy installation and setup No moving parts Measures solids or liquids Cost 20 to 30% less on average then other brands Ideal for difficult level measurement applications such as vapor, steam, pressure, change of temperature, dust and foam. High SNR, even in the case of fluctuations results in accurate performance High frequency, the best choice to measure solids and low dielectric media HART®, 2-Wire System Intrinsically Safe (Exia IIC T6 Ga) Economically Priced

RANGER ELITE™ ULTRASONIC LEVEL TRANSMITTER FEATURES & BENEFITS Easy installation and start-up Large 4 line graphic display Standard HART Communication interface Durable powder coated aluminum housing for long life 2″ NPT threaded process connection Short 8″ dead band and up to 40 feet measurement range Adjustable filters compensate for tank mixers or turbulence Temperate compensation for improved accuracy Adjustable sensitivity & gain plus auto-tuning signal process

RANGER PLUS™ ULTRASONIC LEVEL TRANSMITTER FEATURES & BENEFITS Unaffected by optical factors like color and transparency Computer (PC) software allows remote adjustment Standard RS-485 Serial Interface Durable housing for long life Threaded at both ends Optional threaded jam nut in applications where no threaded fitting is available Short & Overload protection I/O Adjustable filters compensate for tank mixers or turbulence Temperature compensation for improved accuracy Adjusted sensitivity 4″ deadband LTRP-10 (UP TO 10FT RANGE) LTRP-35 (UP TO 35FT RANGE)

RANGER ONE™ ULTRASONIC LEVEL TRANSMITTER FEATURES & BENEFITS Long range, short dead band Unaffected by optical factors like color and transparency PC or button "teachable" setup Narrow beam adjustments to optimize performance Temperature compensated Quick mounting 1.18 inch (30 millimeter) type 316 stainless steel housing Sealed epoxy potting for wet and dirty applications Ruggedized piezoelectric ultrasonic transducer, potted in place Hardened internal electronics UV resistant, potted-in cable Short and overload protected input / output

COMMUNICATION TOOLS TOOLS & SOFTWARE FOR LEVEL SENSORS

LTCT™ RS485 COMMUNICATION TOOL FEATURES & BENEFITS Perform mounting calibration procedure Detects and adjusts mounting obstructions Auto-calibrate and auto-adjust function Software is included with purchase of the communication tool Economically Priced

HART FLO™ HART COMMUNICATION TOOL FEATURES & BENEFITS Economical and Easy-to-Use Standard USB Connector Send and Receive LED Indicators Galvanic Isolation

LEVEL SWITCHES ULTRASONIC AND VIBRATING

RANGER PLUS™ ULTRASONIC LEVEL SWITCH FEATURES & BENEFITS Unaffected by optical factors like color and transparency Computer (PC) software allows remote adjustment Standard RS-485 Serial Interface Durable housing for long life Threaded at both ends Optional threaded jam nut in applications where no threaded fitting is available Short & Overload protection I/O Adjustable filters compensate for tank mixers or turbulence Temperature compensation for improved accuracy Adjusted sensitivity 4″ deadband LTRP-10 (UP TO 10FT RANGE) LTRP-35 (UP TO 35FT RANGE)

VIBEX™ VIBRATING LEVEL SWITCH FEATURES & BENEFITS Simple, compact design Extremely reliable Setup without adjustment or calibration Independent of liquid properties and installation conditions No moving parts, thus wear and maintenance free External test option using test magnet Suitable for temperatures up to 302ºF (150ºC)

VIBEX 2000™ VIBRATING LEVEL SWITCH FEATURES & BENEFITS Simple setup without adjustment Product-independent switching point Insensitive to build up Wear and maintenance free Robust and reliable Detection of bulk solids from lbs/in Ability to sense very low bulk solid densities down to 20 g/l Easy setup even without filling or emptying the bin or silo Insensitive to buildup

VIBEX PLUS™ VIBRATING LEVEL SWITCH FEATURES & BENEFITS Setup without adjustment Product-independent switching point Very high reproducibility Wear and maintenance free SIL qualified

LEVEL MONITORS DISPLAYS, RELAYS AND SOFTWARE

DIGACOM 2000™ PROCESS LEVEL MONITOR FEATURES & BENEFITS Bright, 6-Digit LED Display Receive Alerts, Configure & Remote Monitor via DigaLink™ 3.0 Remote Monitoring Software Four Internal Push Buttons Rate Display Totalizer Maximum Range Display Universal VAC or VDC RS-485 Serial Communication Port Modbus Ethernet Communication Transmitter DC Power Isolated, scalable 4-20 mA output NEMA 4X Field Mount Factory Standard Enclosure Optional NEMA 4X Field Mount Battery Enclosure Optional NEMA 7 Field Mount XP Enclosure Optional Epoxy Coated Aluminum Enclosure

EXMOD™ RELAY EXPANSION LEVEL MODULE FEATURES & BENEFITS Relay Setpoint for Rate or Total Auto or Manual Reset of Relay – Latching or Non- Latching Relay Logic or Pump Alternation Can Be Used as a Batch Controller NEMA 4X Enclosure Expands Capabilities of Universal Process Displays Increase Wiring Flexibility Stocking Efficiencies Economical Solution

DIGALINK 3.0™ INTERACTIVE LEVEL SOFTWARE FEATURES & BENEFITS Ability to alerts regarding the application to your PC, tablet and smart phone Simple device configuration Remote monitoring Data logging Optional password protection for the monitoring devices Alarm Summary/History Real-time information Monitor unlimited devices simultaneously Automatic discovery for quick device detection Export data to Microsoft® Excel spreadsheet Compatible with Windows® XP and newer (32-bit and 64-bit systems) Ethernet TCP/IP Communication Modbus®/RS485 Serial Communication

LEVEL SYSTEMS COMPLETE LEVEL MONITORING SYSTEM

CONSERVER™ SOLAR POWERED LEVEL SYSTEM FEATURES & BENEFITS Powers complete level measurement system No other power supply is needed Lowers maintenance cost Uses light energy to generate electricity No connection to the utility company’s power grid UL-Approved AWG 18 cable is put into the fully sealed junction box (weather and UV resistant) material meet UL1703. (EVA) with TPT cushions the solar cells within the laminate and ensures the operating characteristics of the solar cells under virtually any climatic condition. Easily accessible grounding points on all four corners for fast installation. Battery, Solar Charge Controller, Optional Time Delay Circuit Board and Process Monitor all mounted in NEMA 4X Enclosure.

ACCUTANK™ GWR OR ULTRASONIC LEVEL SYSTEM FEATURES & BENEFITS Pre-calibrated at our factory for easy installation & setup s alerts regarding the system to your PC, tablet and smart phone Remote monitoring & real-time information Advanced Data Logging and Totalizer Automatic discovery for quick device detection Monitors unlimited devices Ethernet Communication Universal VAC or VDC Modbus®/RS485 Serial Communication Bright, 6 digit LED display Configuration through DigaLink™ software or four internal push buttons NEMA 4X field mount or NEMA 7 explosion proof enclosure Optional password protection for the monitoring devices

ACCUTANK™ CELLULAR LEVEL SYSTEM FEATURES & BENEFITS Remote monitoring through cellular networks reporting 24/7 online access to data through web portal Battery powered with 2 year lifespan Mobile ready access Measures up to 480″ Non-contacting ultrasonic level sensors System arrives pre-calibrated for easy install

ABOUT FLO-CORP FLO-CORP is a private, family-owned company that is committed to providing properly selected and configured flow, level, and monitoring products with a focus on innovation and customer service. In 1988, FLO-CORP was incorporated in the State of Ohio and started as a small distribution company. In the last seven years, FLO-CORP has moved past distribution and into manufacturing our own line of products. Through manufacturing, we have gained more control over origin of product, quality, and lead times. Furthermore, FLO-CORP now has creative control in the development of new products. We can focus on adding the functionality and features that will best serve our customers. FLO-CORP’s management of quality, lead times, and innovation come together allowing us to provide more product value to our customers. We remain committed to personal customer interaction, where help can still be found without hearing an automated phone system. The FLO-CORP family is dedicated to working hard for our customers by using over three decades of combined experience in flow, level, and display.