Game-Changing Technology for Oil Water Separation. The Development of the RJOS High Efficiency Oil Water Separation System Presented by Wade Bozak C.E.T. RJ Oil Sands Inc.

Operating in Acheson, Alberta since Developing innovative, cost- effective and environmentally sustainable technology solutions RJ Oil Sands Inc With our focus on green engineering and green chemistry values, our team of professionals have developed game changing solutions for enhanced oil recovery from waste streams in the oil and gas industry.

RJOS Technology Our High Efficiency Oil/Water Separation Technology: Does not require heat or chemicals Does not rely on density of the oil to remove oil out of liquid and slurry streams Is fully automated and self adjusting to receive varying oil/water flows and oil surges. The RJOS patented Phase Separation Device utilizes entrained and dissolved gas to effectively separate oil and oil wet solids from process water.

RJOS Technology The RJOS Technology: Recovers all free oil in a de-oiling application. Recovers emulsified oil in a treating application. Will reduce oil content in water to 25 to 50 ppm. Oil froth dryness varies depending on the amount of oil in the process feed. Oil froth can be sent to the existing treater or processed by mechanical means to produce sales oil with BS&W of less than 0.5 percent.

RJ Oil Sands Test Equipment Bench Scale Test Unit at our facility in Acheson, Alberta.

RJOS Technology – Process Flow Diagram Low Energy Oil/Water Separation Oil Froth Recovery Oil Froth Recovery Treater Oily Water Sales Oil Disposal Water

RJOS Client Demonstration Unit The field tests have been run at client sites with highly challenging inflows including: Heavy Oil SAGD Conventional Oil-water Separation Applications ASP Chemical Floods. On site client demonstrations allow for live process trending and data gathering.

RJOS Client Demonstration Unit Capabilities Capacity: 3m3 per hour Portable, self-contained Fully automated Equipped with a Fugitive Emission Management system Technical specification document available on request

ASP Chemical Flood Application Client Site test June 2010 Existing Oil/Water TechnologyRJOS Oil/Water Technology

ASP Chemical Flood Application Client Site test September 2010

Conventional Oil Application Client Site test October 2010

ASP Chemical Flood Application Client Site test February 2011

Simulated ASP Chemical Flood Application Client Site test May 2011

SAGD Facility Oil Water Application Client Site June – July 2011

SAGD Facility Slop Oil Application Client Site June – July 2011

2011 RJOS 1st Commercial Unit RJ Oil Sands and our manufacturing company EBBCO Industrial completed and commissioned the first RJOS commercial unit with 300m 3 /hr flow through capacity.

RJOS Technology Applications Convention Oil - Oil/Water Processing Applications: ASP Chemical Flood In-situ Heavy Oil Batteries Third Party Disposal Well Enhanced Oil Recovery

RJOS Technology Applications Oil Sands- Oil/Water Processing Applications: Middlings Recycle Froth Thin Fine Tails MFT

RJOS Technology Applications SAGD - Oil/Water Processing Applications: Deoiling Highly efficient deoiling of process water for evaporator feed Slop Oil Enhanced oil froth recovery Efficient oil wet solids removal Highly efficient deoiling of process water for evaporator feed

RJOS – 2 Stage Demonstration Process Stage 1 - Shop Bench Test :  RJOS Bench tests on client supplied process water  Collect and test input/output streams Stage 2 - Field Demonstration:  RJOS Demonstration unit is set up at client site for live tests on a process slip streams.

For more information on RJ Oil Sands Inc Oil Water Separation Technology Contact: Wade Bozak Vice President Or Bill Fairhall Sales Manager At