E6xPage 1 Finn-Power E6x The perfect Machine tool for your first FINN-POWER

E6xPage 2 Max. Sheet size 1565 mm x 3074 mm 1,565mm x 2,530mm working area without repositioning - Same system as other turret manufacturers have

E6xPage 3 Servoelectric punching - programmable punch modes, stepless adjustment of speed and position, accurate forming - Low energy consumption and low maintenance cost

E6xPage 4 Punch actuation system Single water cooled servo motor Ball screw for linear movement Pneumatic ram return movement Pull movement for stroke – less wearing for the mechanics Fast punching speed, fully adjustable in both directions Position above the sheet fully adjustable (S-value) Position under the sheet fully adjustable (P-value) One-sided wedge system, high static force in forming Low tonnage load for mechanics 17, 20 or 23 ton punching force available Closed circuit water cooling – prepared for high ambient temperatures

E6xPage 5 Pneumatic clamps with central locking and sheet security monitoring sensors - safe production and fast set-up with optional PCS and 3rd clamp with move

E6xPage 6 Brush tables, max sheet weight 200 kg, max sheet thickness 8 mm -silent, scratch-free sheet motion with best sheet support - optional lifting brushes offer extra safety for sensitive materials (Manual)

E6xPage 7 Standard E6x has 2 loading pins as a standard (yellow pins on picture) - Pin 1 for full sheet X –dimension sheets - Pin 2 for max 1000mm X-dimension sheets Optional easy loading is available for E6x machine including: - Sheet support rolls for heavy material and for all pins - Additional loading pin close to the turret door for smaller sheet loading (red pin on picture) - up-and-down table segment

E6xPage 8 The turret has a total of 20 tool stations offering full customization for customer - Fixed or index tools and Multi-Tools® can be chosen. - Total number of tools can be increased even to over 100 by adding Multi-Tool® stations. - Indexable multi-tools available as option

E6xPage 9 Turret, where tool holders and multi-tools can be changed and updated whenever needed - extended machine lifetime - easy and fast adaptation when manufacturing tasks change - higher resale value - Thick turret tooling

E6xPage 10 Fast indexing 133 rpm - Index with full tonnages max speed and large diameter tools - a must in stand alone production

E6xPage 11 Open architecture TwinCat motion control with Bosch & Rexroth IndraDrive C drive system Finn-Power made machine control and Tulus Lite user interface software with touch screen panel as standard. - Fast setup, easy to use

E6xPage 12 - Easy touch screen operations - Standard Windows functions - USB port and 100Mbs ethernet for data transfer

E6xPage 13 Simple and handy operation panel Axis, tool and clamp information Visual main screen with production part data

E6xPage 14 Graphical turret view for tool data and settings -easy and fast setup and operations - Power by Tulus Lite, new 3 version

E6xPage 15 Graphical online simulation and restart view Easy program selection and Informative task list

E6xPage 16 Easy access JOG-mode panel Also: Machine diagnostic screens Alarm screens Program background editing and restart functions

E6xPage 17 Electric cabinet ready-mounted for transportation No hydraulic unit -fast installation and production start-up Adjustable machine shoes with vibration dampers

E6xPage 18 Electric cabinet on the floor at customer - less vibration; more reliability - close to operator, fast setup operations Remote control (option)

E6xPage 19 FINN-POWER E6x Possiility to use local cabinet cooler (interface included) Slide for punching scrap, no conveyor required Vacuum as option

E6xPage 20 Power consumption Stand-by power consumption less than 0,5kW Average power consumption 4 kW Power connection 3 x 20 A fuse (400V)

E6xPage 21 running costs E6x vs. C5 nergy costs Maintanance Total costs E6x0,4 € /h0,25 € /h0,65 € /h C5 (F4)1,03 € /h0,50 € /h1,53 € /h C5 (F3)2,39 € /h0,55 € /h2,94 € /h Calculation used 4000h/year, 0,0994€/kwh/Germany

E6xPage 22 Wide range of options Auto clamping Sheet distortion sensors 500 mm x 500 mm work chute Extra cabinet cooler connection Sheet and tool lubrication Programmable clamp setting (PCS) 3rd clamp Indexable Multi-tools Drop-in multi-tools Wheel & Roller ball Sheet marker and Inkmarker Remote control Easy tapping / NCT tapping tool Sheet supports Lifting brushes Scrap conveyors,and vacuum unit

E6xPage 23

E6xPage 24

E6xPage 25  Max sheet size 1565 mm x 3074 mm (one repo)  1,565 mm x 2,530mm sheet size without repositioning  Sheet positioning speed 108 m/min  Index rotation speed 133 rpm  Wheel, tapping, marking etc. tool options  17, 20 or 23 ton punching force with accurate servo electric punch control Punching speeds:  700 / 390 / 150 (17 ton)  650 / 380 / 150 (20 ton)  600 / 370 / 150 (23ton)  Accurate and fully adjustable punch stroke, wheel, forming etc.  Closed circuit water cooled punch motor  Fast manual loading with optional easy loading system  Reliable and easy Finn-Power CNC control  500 mm x 500 mm work chute option  Economical and reliable = highly productive  “Does more than you thought it would"

E6xPage 26 FINN-POWER E6x Performance and reliability at low investment and operating costs