IT-4000 FEATURE S PICTURE SPECIFICATIONS Globa Power Supply with PFC works anywhere in the world 3rd-generatoin patented Class I(BCA) corciotry couples power effiencntly to the load and provides low AC current drain Onboard DSP with 24-bit,96kHz cirrus Logic A/D and D/A converter AES/EBU digital audio input Analog and digital thru connectors Ethernet connector accepts an RJ-45 connector for HiQnet and TCP /IP networking Frequency Response : 20Hz ~ 20kHz, +/-0.25dB Signal to Noise Ratio, A-weighted : >105dB T. H. D : <0.35% Crosstalk(20Hz~1kHz) : >80dB Common Mode Rejection(20Hz~1kHz) : >50dB Maximum Input Level : +15dBu or +21dBu A/D, D/A Converters : 24bit 96kHz Cirrus Logic Digital Input : AES/EBU, 24bit, 32~48kHz Dampling Factor(20Hz~100Hz, 8ohms) : >5,000 Network : TCP/IQ an Hiqnet, compatible with standard 100MB Ethernet Hardware 2-ohms Dual Output Power(20Hz~20kHz) : 1,800W+1,800W 4-ohms Dual Output Power(20Hz~20kHz) : 2,000W+2,000W 8-ohms Dual Output Power(20Hz~20kHz) : 1,250W+1,250W 4-ohms Bridge Output Power(20Hz~20kHz) : 3,600W 8-ohms Bridge Output Power(20Hz~20kHz) : 4,000W Dimension : 89(H) x 483(W) x 411(D)mm Weight : 12.7kg

IT-6000 FEATURE S PICTURE SPECIFICATIONS Globa Power Supply with PFC works anywhere in the world 3rd-generatoin patented Class I(BCA) corciotry couples power effiencntly to the load and provides low AC current drain Onboard DSP with 24-bit,96kHz cirrus Logic A/D and D/A converter AES/EBU digital audio input Analog and digital thru connectors Ethernet connector accepts an RJ-45 connector for HiQnet and TCP /IP networking Frequency Response : 20Hz ~ 20kHz, +/-0.25dB Signal to Noise Ratio, A-weighted : >105dB T. H. D : <0.35% Crosstalk(20Hz~1kHz) : >80dB Common Mode Rejection(20Hz~1kHz) : >50dB Maximum Input Level : +15dBu or +21dBu A/D, D/A Converters : 24bit 96kHz Cirrus Logic Digital Input : AES/EBU, 24bit, 32~48kHz Dampling Factor(20Hz~100Hz, 8ohms) : >5,000 Network : TCP/IQ an Hiqnet, compatible with standard 100MB Ethernet Hardware 2-ohms Dual Output Power(20Hz~20kHz) : 2,500W+,2500W 4-ohms Dual Output Power(20Hz~20kHz) : 3,000W+3,000W 8-ohms Dual Output Power(20Hz~20kHz) : 1,500W+1,500W 4-ohms Bridge Output Power(20Hz~20kHz) : 5,000W 8-ohms Bridge Output Power(20Hz~20kHz) : 6,000W Dimension : 89(H) x 483(W) x 411(D)mm Weight : 12.7kg

IT-8000 FEATURE S PICTURE SPECIFICATIONS Globa Power Supply with PFC works anywhere in the world 3rd-generatoin patented Class I(BCA) corciotry couples power effiencntly to the load and provides low AC current drain Onboard DSP with 24-bit,96kHz cirrus Logic A/D and D/A converter AES/EBU digital audio input Analog and digital thru connectors Ethernet connector accepts an RJ-45 connector for HiQnet and TCP /IP networking Frequency Response : 20Hz ~ 20kHz, +/-0.25dB Signal to Noise Ratio, A-weighted : >105dB T. H. D : <0.35% Crosstalk(20Hz~1kHz) : >80dB Common Mode Rejection(20Hz~1kHz) : >50dB Maximum Input Level : +15dBu or +21dBu A/D, D/A Converters : 24bit 96kHz Cirrus Logic Digital Input : AES/EBU, 24bit, 32~48kHz Dampling Factor(20Hz~100Hz, 8ohms) : >5,000 Network : TCP/IQ an Hiqnet, compatible with standard 100MB Ethernet Hardware 2-ohms Dual Output Power(20Hz~20kHz) : 3,500W+3,500W 4-ohms Dual Output Power(20Hz~20kHz) : 4,000W+4,000W 8-ohms Dual Output Power(20Hz~20kHz) : 2,100W+2,100W 4-ohms Bridge Output Power(20Hz~20kHz) : 7,000W 8-ohms Bridge Output Power(20Hz~20kHz) : 8,000W Dimension : 89(H) x 483(W) x 411(D)mm Weight : 12.7kg

MA-602 FEATURE S PICTURE SPECIFICATIONS Lower Distortion and Superior Reliability Patternd ODEP circuitry compensates for overheating and overload to keep the amplifier working when others would fail Enhanced PIP2 connector accepts new accessory modules that tailor the amplifier to suit specific applicatons, such as network ing via HIQnet or TCP/IQ Full protection from shorted, open and mismatched loads Frequency Response : 20Hz ~ 20kHz, +/-0.1dB Signal to Noise Ratio, A-weighted : >105dB T. H. D(20Hz~1kHz) : <0.05% Load Impedance : 2~16ohms in stereo, 4~16ohms in Bridge Mono Dampling Factor(10Hz~400Hz) : >1,000 2-ohms Dual Output Power(20Hz~20kHz) : 335W+335W 4-ohms Dual Output Power(20Hz~20kHz) : 300W+300W 8-ohms Dual Output Power(20Hz~20kHz) : 210W+210W 4-ohms Bridge Output Power(20Hz~20kHz) : 650W 8-ohms Bridge Output Power(20Hz~20kHz) : 605W Dimension : 89(H) x 483(W) x 406(D)mm Weight : 17.9kg

MA-1202 FEATURE S PICTURE SPECIFICATIONS Lower Distortion and Superior Reliability Patternd ODEP circuitry compensates for overheating and overload to keep the amplifier working when others would fail Enhanced PIP2 connector accepts new accessory modules that tailor the amplifier to suit specific applicatons, such as network ing via HIQnet or TCP/IQ Full protection from shorted, open and mismatched loads Frequency Response : 20Hz ~ 20kHz, +/-0.1dB Signal to Noise Ratio, A-weighted : >105dB T. H. D(20Hz~1kHz) : <0.05% Load Impedance : 2~16ohms in stereo, 4~16ohms in Bridge Mono Dampling Factor(10Hz~400Hz) : >1,000 2-ohms Dual Output Power(20Hz~20kHz) : 585W+585W 4-ohms Dual Output Power(20Hz~20kHz) : 450W+450W 8-ohms Dual Output Power(20Hz~20kHz) : 295W+295W 4-ohms Bridge Output Power(20Hz~20kHz) : 1,130W 8-ohms Bridge Output Power(20Hz~20kHz) : 895W Dimension : 89(H) x 483(W) x 406(D)mm Weight : 20.0kg

MA-2402 FEATURE S PICTURE SPECIFICATIONS Lower Distortion and Superior Reliability Patternd ODEP circuitry compensates for overheating and overload to keep the amplifier working when others would fail Enhanced PIP2 connector accepts new accessory modules that tailor the amplifier to suit specific applicatons, such as network ing via HIQnet or TCP/IQ Full protection from shorted, open and mismatched loads Frequency Response : 20Hz ~ 20kHz, +/-0.1dB Signal to Noise Ratio, A-weighted : >105dB T. H. D(20Hz~1kHz) : <0.05% Load Impedance : 2~16ohms in stereo, 4~16ohms in Bridge Mono Dampling Factor(10Hz~400Hz) : >1,000 2-ohms Dual Output Power(20Hz~20kHz) : 850W+850W 4-ohms Dual Output Power(20Hz~20kHz) : 750W+750W 8-ohms Dual Output Power(20Hz~20kHz) : 505W+505W 4-ohms Bridge Output Power(20Hz~20kHz) : 1,670W 8-ohms Bridge Output Power(20Hz~20kHz) : 1,485W Dimension : 89(H) x 483(W) x 406(D)mm Weight : 23.5kg

MA-3600VZ FEATURE S PICTURE SPECIFICATIONS Lower Distortion and Superior Reliability Patternd ODEP circuitry compensates for overheating and overload to keep the amplifier working when others would fail PIP Programmable Input Processor connector accepts accessory modules that tailor the amplifier to suit specific application Full protection from shorted, open and mismatched loads Frequency Response : 20Hz ~ 20kHz, +/-0.1dB Signal to Noise Ratio, A-weighted : >105dB T. H. D(20Hz~1kHz) : <0.05% Load Impedance : 2~16ohms in stereo, 8~16ohms in Bridge Mono Dampling Factor(10Hz~400Hz) : >1,000 2-ohms Dual Output Power(20Hz~20kHz) : 2,155W+2,155W 4-ohms Dual Output Power(20Hz~20kHz) : 1,775W+1,775W 8-ohms Dual Output Power(20Hz~20kHz) : 1,090W+1,090W 8-ohms Bridge Output Power(20Hz~20kHz) : 3,670W Dimension : 133(H) x 483(W) x 403(D)mm Weight : 35.2kg

MA-5002VZ FEATURE S PICTURE SPECIFICATIONS Lower Distortion and Superior Reliability Patternd ODEP circuitry compensates for overheating and overload to keep the amplifier working when others would fail PIP2 Programmable Input Processor connector accepts accessory modules that tailor the amplifier to suit specific application Full protection from shorted, open and mismatched loads Independent error-driven compressor for each channel that can be set for fast or slow attack and release times Frequency Response : 20Hz ~ 20kHz, +/-0.1dB Signal to Noise Ratio, A-weighted : >105dB T. H. D(20Hz~1kHz) : <0.05% Load Impedance : 2~16ohms in stereo, 4~16ohms in Bridge Mono Dampling Factor(10Hz~400Hz) : >1,000 2-ohms Dual Output Power(1kHz) : 1,800W+1,800W 4-ohms Dual Output Power(1kHz) : 2,000W+2,000W 8-ohms Dual Output Power(1kHz) : 1,120W+1,120W 4-ohms Bridge Output Power(1kHz) : 3,505W 8-ohms Bridge Output Power(1kHz) : 3,140W Dimension : 89(H) x 483(W) x 406(D)mm Weight : 28.9kg

CTs-600 FEATURE S PICTURE SPECIFICATIONS TLC protection circuitry protects the amplifier from long term excessive heat by subtly and dynamically reducing the gain only PIP2 connector accepts accessory modules that tailor the amplifie r to suit specific applications Comprehensive array of indicator including Power, Data and Bridge, along with Ready, Signal, Clip, Thermal and fault for each channel Continuously variable fans optimize cooling efficienty Frequency Response : 20Hz ~ 20kHz, +/-0.25dB Signal to Noise Ratio, A-weighted : >105dB T. H. D(20Hz~1kHz) : <0.1% Crosstalk(20Hz~1kHz) : >80dB Common Mode Rejection(20Hz~1kHz) : >50dB Maximum Input Level : +20dBu or +32dBu Dampling Factor(10Hz~100Hz) : >3,000 2-ohms Dual Output Power(1kHz) : 150W+150W 4-ohms Dual Output Power(20Hz~20kHz) : 300W+300W 8-ohms Dual Output Power(20Hz~20kHz) : 300W+300W 16-ohms Dual Output Power(20Hz~20kHz) : 300W+300W 70V Dual Output Power(20Hz~20kHz) : 300W 4-ohms Bridge Output Power(1kHz) : 300W 8-ohms Bridge Output Power(20Hz~20kHz) : 600W 16-ohms Bridge Output Power(20Hz~20kHz) : 600W 140V Bridge(20Hz~20kHz) : 600W Dimension : 89(H) x 483(W) x 362(D)mm Weight : 10.3kg

CTs-1200 FEATURE S PICTURE SPECIFICATIONS TLC protection circuitry protects the amplifier from long term excessive heat by subtly and dynamically reducing the gain only PIP2 connector accepts accessory modules that tailor the amplifie r to suit specific applications Comprehensive array of indicator including Power, Data and Bridge, along with Ready, Signal, Clip, Thermal and fault for each channel Continuously variable fans optimize cooling efficienty Frequency Response : 20Hz ~ 20kHz, +/-0.25dB Signal to Noise Ratio, A-weighted : >105dB T. H. D(20Hz~20kHz) : <0.1% Crosstalk(20Hz~1kHz) : >80dB Common Mode Rejection(20Hz~1kHz) : >50dB Maximum Input Level : +20dBu or +32dBu Dampling Factor(10Hz~100Hz) : >3,000 2-ohms Dual Output Power(1kHz) : 250W+250W 4-ohms Dual Output Power(20Hz~20kHz) : 600W+600W 8-ohms Dual Output Power(20Hz~20kHz) : 600W+600W 16-ohms Dual Output Power(20Hz~20kHz) : 300W+300W 70V Dual Output Power(20Hz~20kHz) : 600W+600W 4-ohms Bridge Output Power(1kHz) : 500W 8-ohms Bridge Output Power(20Hz~20kHz) : 1,200W 16-ohms Bridge Output Power(20Hz~20kHz) : 1,200W 140V Bridge(20Hz~20kHz) : 1,200W Dimension : 89(H) x 483(W) x 362(D)mm Weight : 10.6kg

CTs-2000 FEATURE S PICTURE SPECIFICATIONS TLC protection circuitry protects the amplifier from long term excessive heat by subtly and dynamically reducing the gain only PIP2 connector accepts accessory modules that tailor the amplifie r to suit specific applications Comprehensive array of indicator including Power, Data and Bridge, along with Ready, Signal, Clip, Thermal and fault for each channel Continuously variable fans optimize cooling efficienty Frequency Response : 20Hz ~ 20kHz, +/-0.25dB Signal to Noise Ratio, A-weighted : >105dB T. H. D(20Hz~20kHz) : <0.35% Crosstalk(20Hz~1kHz) : >80dB Common Mode Rejection(20Hz~1kHz) : >50dB Maximum Input Level : +20dBu or +32dBu Dampling Factor(10Hz~100Hz) : >3,000 2-ohms Dual Output Power(20Hz~20kHz) : 1,000W+1,000W 4-ohms Dual Output Power(20Hz~20kHz) : 1,000W+1,000W 8-ohms Dual Output Power(20Hz~20kHz) : 1,000W+1,000W 16-ohms Dual Output Power(20Hz~20kHz) : 625W+625W 70V Dual Output Power(20Hz~20kHz) : 1,000W+1,000W 140V Dual Output Power(20Hz~20kHz) : 1,000W+1,000W 4-ohms Bridge Output Power(20Hz~20kHz) : 2,000W 8-ohms Bridge Output Power(20Hz~20kHz) : 2,000W 16-ohms Bridge Output Power(20Hz~20kHz) : 2,000W 140V Bridge(20Hz~20kHz) : 2,000W 200V Bridge(20Hz~20kHz) : 2,000W Dimension : 89(H) x 483(W) x 362(D)mm Weight : 12.2kg

CTs-3000 FEATURE S PICTURE SPECIFICATIONS TLC protection circuitry protects the amplifier from long term excessive heat by subtly and dynamically reducing the gain only PIP2 connector accepts accessory modules that tailor the amplifie r to suit specific applications Comprehensive array of indicator including Power, Data and Bridge, along with Ready, Signal, Clip, Thermal and fault for each channel Continuously variable fans optimize cooling efficienty Frequency Response : 20Hz ~ 20kHz, +/-0.25dB Signal to Noise Ratio, A-weighted : >105dB T. H. D(20Hz~20kHz) : <0.35% Crosstalk(20Hz~1kHz) : >80dB Common Mode Rejection(20Hz~1kHz) : >50dB Maximum Input Level : +20dBu or +32dBu Dampling Factor(10Hz~100Hz) : >3,000 2-ohms Dual Output Power(20Hz~20kHz) : 1,500W+1,500W 4-ohms Dual Output Power(20Hz~20kHz) : 1,500W+1,500W 8-ohms Dual Output Power(20Hz~20kHz) : 1,250W+1,250W 16-ohms Dual Output Power(20Hz~20kHz) : 625W+625W 70V Dual Output Power(20Hz~20kHz) : 1,500W+1,500W 140V Dual Output Power(20Hz~20kHz) : 1,500W+1,500W 4-ohms Bridge Output Power(20Hz~20kHz) : 3,000W 8-ohms Bridge Output Power(20Hz~20kHz) : 3,000W 16-ohms Bridge Output Power(20Hz~20kHz) : 2,500W 140V Bridge(20Hz~20kHz) : 3,000W 200V Bridge(20Hz~20kHz) : 3,000W Dimension : 89(H) x 483(W) x 362(D)mm Weight : 12.6kg

XS-500 FEATURE S PICTURE SPECIFICATIONS Efficient forced-air fan prevents excessive thermal buildup Precision detented level controls, power switch, and eight LEDs which indicate signal and each channel, power, AC mains, bridge mode, temperature and fault conditions Microprocessor-controlled protections system Frequency Response : 22Hz ~ 22kHz, +/-1dB Signal to Noise Ratio, A-weighted : >102dB T. H. D(20Hz~20kHz) : <0.5% Crosstalk(1kHz, 20kHz) : >55dB Dampling Factor(10Hz~400Hz) : >200 2-ohms Dual Output Power(1kHz) : 750W+750W 4-ohms Dual Output Power(1kHz) : 500W+500W 8-ohms Dual Output Power(1kHz) : 400W+400W 4-ohms Bridge Output Power(1kHz) : 1,600W 8-ohms Bridge Output Power(1kHz) : 1,450W Dimension : 89(H) x 483(W) x 435(D)mm Weight : 13.1kg

XS-700 FEATURE S PICTURE SPECIFICATIONS Efficient forced-air fan prevents excessive thermal buildup Precision detented level controls, power switch, and eight LEDs which indicate signal and each channel, power, AC mains, bridge mode, temperature and fault conditions Microprocessor-controlled protections system Frequency Response : 22Hz ~ 22kHz, +/-1dB Signal to Noise Ratio, A-weighted : >102dB T. H. D(20Hz~20kHz) : <0.5% Crosstalk(1kHz, 20kHz) : >55dB Dampling Factor(10Hz~400Hz) : >200 2-ohms Dual Output Power(1kHz) : 900W+900W 4-ohms Dual Output Power(1kHz) : 750W+750W 8-ohms Dual Output Power(1kHz) : 450W+450W 4-ohms Bridge Output Power(1kHz) : 1,900W 8-ohms Bridge Output Power(1kHz) : 1,645W Dimension : 89(H) x 483(W) x 435(D)mm Weight : 13.1kg

XS-900 FEATURE S PICTURE SPECIFICATIONS Efficient forced-air fan prevents excessive thermal buildup Precision detented level controls, power switch, and eight LEDs which indicate signal and each channel, power, AC mains, bridge mode, temperature and fault conditions Microprocessor-controlled protections system Frequency Response : 22Hz ~ 22kHz, +/-1dB Signal to Noise Ratio, A-weighted : >102dB T. H. D(20Hz~20kHz) : <0.5% Crosstalk(1kHz, 20kHz) : >55dB Dampling Factor(10Hz~400Hz) : >200 2-ohms Dual Output Power(1kHz) : 1,200W+1,200W 4-ohms Dual Output Power(1kHz) : 900W+900W 8-ohms Dual Output Power(1kHz) : 600W+600W 4-ohms Bridge Output Power(1kHz) : 2,500W 8-ohms Bridge Output Power(1kHz) : 2,100W Dimension : 89(H) x 483(W) x 435(D)mm Weight : 13.1kg

XS-1200 FEATURE S PICTURE SPECIFICATIONS Efficient forced-air fan prevents excessive thermal buildup Precision detented level controls, power switch, and eight LEDs which indicate signal and each channel, power, AC mains, bridge mode, temperature and fault conditions Microprocessor-controlled protections system Frequency Response : 22Hz ~ 22kHz, +/-1dB Signal to Noise Ratio, A-weighted : >102dB T. H. D(20Hz~20kHz) : <0.5% Crosstalk(1kHz, 20kHz) : >55dB Dampling Factor(10Hz~400Hz) : >200 2-ohms Dual Output Power(1kHz) : 1,600W+1,600W 4-ohms Dual Output Power(1kHz) : 1,100W+1,100W 8-ohms Dual Output Power(1kHz) : 650W+650W 4-ohms Bridge Output Power(1kHz) : 3,000W 8-ohms Bridge Output Power(1kHz) : 2,000W Dimension : 89(H) x 483(W) x 435(D)mm Weight : 13.1kg

XLS-202 FEATURE S PICTURE SPECIFICATIONS Efficient forced-air fan prevents excessive thermal buildup Precision detented level controls, power switch, and eight LEDs which indicate signal and each channel, power, AC mains, bridge mode, temperature and fault conditions Electronically balanced XLR inputs Frequency Response : 22Hz ~ 20kHz, +0/-0.8dB Signal to Noise Ratio, A-weighted : >98dB T. H. D(20Hz~1kHz) : <0.5% Dampling Factor(10Hz~400Hz) : >200 2-ohms Dual Output Power(1kHz) : 330W+330W 4-ohms Dual Output Power(1kHz) : 300W+300W 8-ohms Dual Output Power(1kHz) : 200W+200W 4-ohms Bridge Output Power(1kHz) : 660W 8-ohms Bridge Output Power(1kHz) : 600W Dimension : 89(H) x 483(W) x 386(D)mm Weight : 10.4kg

XLS-402 FEATURE S PICTURE SPECIFICATIONS Efficient forced-air fan prevents excessive thermal buildup Precision detented level controls, power switch, and eight LEDs which indicate signal and each channel, power, AC mains, bridge mode, temperature and fault conditions Electronically balanced XLR inputs Frequency Response : 22Hz ~ 20kHz, +0/-0.8dB Signal to Noise Ratio, A-weighted : >98dB T. H. D(20Hz~1kHz) : <0.5% Dampling Factor(10Hz~400Hz) : >200 2-ohms Dual Output Power(1kHz) : 570W+570W 4-ohms Dual Output Power(1kHz) : 450W+450W 8-ohms Dual Output Power(1kHz) : 300W+300W 4-ohms Bridge Output Power(1kHz) : 1,140W 8-ohms Bridge Output Power(1kHz) : 900W Dimension : 89(H) x 483(W) x 386(D)mm Weight : 11.7kg

XLS-602 FEATURE S PICTURE SPECIFICATIONS Efficient forced-air fan prevents excessive thermal buildup Precision detented level controls, power switch, and eight LEDs which indicate signal and each channel, power, AC mains, bridge mode, temperature and fault conditions Electronically balanced XLR inputs Frequency Response : 22Hz ~ 20kHz, +0/-0.8dB Signal to Noise Ratio, A-weighted : >98dB T. H. D(20Hz~1kHz) : <0.5% Dampling Factor(10Hz~400Hz) : >200 2-ohms Dual Output Power(1kHz) : 840W+840W 4-ohms Dual Output Power(1kHz) : 600W+600W 8-ohms Dual Output Power(1kHz) : 380W+380W 4-ohms Bridge Output Power(1kHz) : 1,680W 8-ohms Bridge Output Power(1kHz) : 1,200W Dimension : 89(H) x 483(W) x 386(D)mm Weight : 13.2kg

XLS-802 FEATURE S PICTURE SPECIFICATIONS Efficient forced-air fan prevents excessive thermal buildup Precision detented level controls, power switch, and eight LEDs which indicate signal and each channel, power, AC mains, bridge mode, temperature and fault conditions Electronically balanced XLR inputs Frequency Response : 22Hz ~ 20kHz, +0/-0.8dB Signal to Noise Ratio, A-weighted : >98dB T. H. D(20Hz~1kHz) : <0.5% Dampling Factor(10Hz~400Hz) : >200 2-ohms Dual Output Power(1kHz) : 1,050W+1,050W 4-ohms Dual Output Power(1kHz) : 800W+800W 8-ohms Dual Output Power(1kHz) : 500W+500W 4-ohms Bridge Output Power(1kHz) : 2,100W 8-ohms Bridge Output Power(1kHz) : 1,600W Dimension : 89(H) x 483(W) x 386(D)mm Weight : 16.1kg

180MA FEATURE S PICTURE SPECIFICATIONS 4 or 8 inputs, 1 or 2 amplifier output channels Advanced protection system includes output current limiting, DC protections, circuit breaker/fuse, and thermal protections Balanced Phoneix type line input Ideal for commercial and industrial use Frequency Response : 70Hz ~ 19kHz, +/-1dB Signal to Noise Ratio, A-weighted : >85dB T. H. D(1kHz) : <0.5% Minimum guaranteed power into 4ohms or 70V/100V out: 80W Dimension : 89(H) x 483(W) x 310(D)mm Weight : 9.5kg

280MA FEATURE S PICTURE SPECIFICATIONS 4 or 8 inputs, 1 or 2 amplifier output channels Advanced protection system includes output current limiting, DC protections, circuit breaker/fuse, and thermal protections Balanced Phoneix type line input Ideal for commercial and industrial use Frequency Response : 70Hz ~ 19kHz, +/-1dB Signal to Noise Ratio, A-weighted : >85dB T. H. D(1kHz) : <0.5% Minimum guaranteed power into 4ohms or 70V/100V out: 80W Dimension : 89(H) x 483(W) x 310(D)mm Weight : 11.5kg

CE-1000A FEATURE S PICTURE SPECIFICATIONS Accurate, uncolored sound with very low distortion for the best in music and voice re-production Advanced protection circuitry guards against shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults Extremely versatile, handling a wide range of speaker impedance and outputs Frequency Response : 20Hz ~ 25kHz, +/-0.2dB Signal to Noise Ratio, A-weighted : >105dB T. H. D(20Hz~1kHz) : <0.5% Crosstalk(20Hz~20kHz) : >55dB Dampling Factor(10Hz~400Hz) : >400 2-ohms Dual Output Power(1kHz) : 565W+565W 4-ohms Dual Output Power(1kHz) : 450W+450W 8-ohms Dual Output Power(1kHz) : 275W+275W 4-ohms Bridge Output Power(1kHz) : 1,100W 8-ohms Bridge Output Power(1kHz) : 900W Dimension : 133(H) x 483(W) x 311(D)mm Weight : 14.79kg

CE-2000A FEATURE S PICTURE SPECIFICATIONS Accurate, uncolored sound with very low distortion for the best in music and voice re-production Advanced protection circuitry guards against shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults Extremely versatile, handling a wide range of speaker impedance and outputs Frequency Response : 20Hz ~ 25kHz, +/-0.2dB Signal to Noise Ratio, A-weighted : >105dB T. H. D(20Hz~1kHz) : <0.5% Crosstalk(20Hz~20kHz) : >55dB Dampling Factor(10Hz~400Hz) : >400 2-ohms Dual Output Power(1kHz) : 975W+975W 4-ohms Dual Output Power(1kHz) : 660W+660W 8-ohms Dual Output Power(1kHz) : 400W+400W 4-ohms Bridge Output Power(1kHz) : 1,950W 8-ohms Bridge Output Power(1kHz) : 1,320W Dimension : 133(H) x 483(W) x 311(D)mm Weight : 18.28kg

CE-4000 FEATURE S PICTURE SPECIFICATIONS Extremely reliable, keeps runnung under the harshest of condition Switch-mode power supply with PFC allows world-wide use Sub-bass output via integral 4-position high-pass and 3-position low-pass filter sets for each channel Choice of dual output connectors 3-speed Fan on Demand Frequency Response : 20Hz ~ 20kHz, +/-0.25dB Signal to Noise Ratio, A-weighted : >105dB T. H. D(20Hz~20kHz) : <0.5% Crosstalk(20Hz~10kHz) : >50dB Dampling Factor(10Hz~400Hz) : >700 2-ohms Dual Output Power(1kHz) : 1,400W+1,400W 4-ohms Dual Output Power(1kHz) : 1,200W+1,200W 8-ohms Dual Output Power(1kHz) : 600W+600W 4-ohms Bridge Output Power(1kHz) : 2,800W 8-ohms Bridge Output Power(1kHz) : 2,400W Dimension : 133(H) x 483(W) x 311(D)mm Weight : 18.4kg

CH1 FEATURE S PICTURE SPECIFICATIONS Accurate, uncolored sound with very low distortion for the best in music and voice re-production Advanced protection circuitry guards against shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults High-pass filter for each channel provides low-freqneucy roll off to eliminate step down transformer saturation when in 70V distirbut ed systems Frequency Response : 20Hz ~ 20kHz, +/-0.1dB Signal to Noise Ratio, A-weighted : >105dB T. H. D(20Hz~20kHz) : <0.5% Crosstalk(20Hz~20kHz) : >50dB Dampling Factor(10Hz~400Hz) : >400 4-ohms Dual Output Power(1kHz) : 450W+450W 8-ohms Dual Output Power(1kHz) : 275W+275W 70V Dual Output Power(1kHz) : 300W+300W 8-ohms Bridge Output Power(1kHz) : 900W 140V Bridge Output Power(1kHz) : 600W Dimension : 133(H) x 483(W) x 311(D)mm Weight : 18.4kg

CH2 FEATURE S PICTURE SPECIFICATIONS Accurate, uncolored sound with very low distortion for the best in music and voice re-production Advanced protection circuitry guards against shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults High-pass filter for each channel provides low-freqneucy roll off to eliminate step down transformer saturation when in 70V distirbut ed systems Frequency Response : 20Hz ~ 20kHz, +/-0.1dB Signal to Noise Ratio, A-weighted : >105dB T. H. D(20Hz~20kHz) : <0.5% Crosstalk(20Hz~20kHz) : >50dB Dampling Factor(10Hz~400Hz) : >400 4-ohms Dual Output Power(1kHz) : 660W+660W 8-ohms Dual Output Power(1kHz) : 400W+400W 70V Dual Output Power(1kHz) : 600W+600W 8-ohms Bridge Output Power(1kHz) : 1,320W 140V Bridge Output Power(1kHz) : 1,200W Dimension : 133(H) x 483(W) x 365(D)mm Weight : 18.5kg

CH4 FEATURE S PICTURE SPECIFICATIONS Accurate, uncolored sound with very low distortion for the best in music and voice re-production Advanced protection circuitry guards against shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults High-pass filter for each channel provides low-freqneucy roll off to eliminate step down transformer saturation when in 70V distirbut ed systems Frequency Response : 20Hz ~ 20kHz, +/-0.25dB Signal to Noise Ratio, A-weighted : >102dB T. H. D(20Hz~20kHz) : <0.5% Crosstalk(20Hz~20kHz) : >50dB Dampling Factor(10Hz~400Hz) : >400 2-ohms Dual Output Power(1kHz) : 1,400W+1,400W 4-ohms Dual Output Power(1kHz) : 1,200W+1,200W 8-ohms Dual Output Power(1kHz) : 600W+600W 70V Dual Output Power(1kHz) : 1,200W+1,200W 4-ohms Bridge Output Power(1kHz) : 2,800W 8-ohms Bridge Output Power(1kHz) : 2,400W 140V Bridge Output Power(1kHz) : 2,400W Dimension : 133(H) x 483(W) x 365(D)mm Weight : 15.1kg

CL1 FEATURE S PICTURE SPECIFICATIONS Accurate, uncolored sound with very low distortion for the best in music and voice re-production Advanced protection circuitry guards against shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults Active crossover with signal routing available with optional System Solution Topology modules Frequency Response : 20Hz ~ 20kHz, +/-0.1dB Signal to Noise Ratio, A-weighted : >105dB T. H. D(20Hz~20kHz) : <0.5% Crosstalk(20Hz~20kHz) : >50dB Dampling Factor(10Hz~400Hz) : >400 2-ohms Dual Output Power(1kHz) : 560W+560W 4-ohms Dual Output Power(1kHz) : 450W+450W 8-ohms Dual Output Power(1kHz) : 275W+275W 4-ohms Bridge Output Power(1kHz) : 1,100W 8-ohms Bridge Output Power(1kHz) : 900W Dimension : 133(H) x 483(W) x 311(D)mm Weight : 14.8kg

CL2 FEATURE S PICTURE SPECIFICATIONS Accurate, uncolored sound with very low distortion for the best in music and voice re-production Advanced protection circuitry guards against shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults Active crossover with signal routing available with optional System Solution Topology modules Frequency Response : 20Hz ~ 20kHz, +/-0.1dB Signal to Noise Ratio, A-weighted : >105dB T. H. D(20Hz~20kHz) : <0.5% Crosstalk(20Hz~20kHz) : >50dB Dampling Factor(10Hz~400Hz) : >400 2-ohms Dual Output Power(1kHz) : 975W+975W 4-ohms Dual Output Power(1kHz) : 660W+660W 8-ohms Dual Output Power(1kHz) : 400W+400W 4-ohms Bridge Output Power(1kHz) : 1,950W 8-ohms Bridge Output Power(1kHz) : 1,320W Dimension : 133(H) x 483(W) x 311(D)mm Weight : 18.3kg

CL4 FEATURE S PICTURE SPECIFICATIONS Accurate, uncolored sound with very low distortion for the best in music and voice re-production Advanced protection circuitry guards against shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults Active crossover with signal routing available with optional System Solution Topology modules Frequency Response : 20Hz ~ 20kHz, +/-0.25dB Signal to Noise Ratio, A-weighted : >102dB T. H. D(20Hz~20kHz) : <0.5% Crosstalk(20Hz~20kHz) : >50dB Dampling Factor(10Hz~400Hz) : >700 2-ohms Dual Output Power(1kHz) : 1,400W+1,400W 4-ohms Dual Output Power(1kHz) : 1,200W+1,200W 8-ohms Dual Output Power(1kHz) : 600W+600W 4-ohms Bridge Output Power(1kHz) : 2,800W 8-ohms Bridge Output Power(1kHz) : 2,400W Dimension : 133(H) x 483(W) x 311(D)mm Weight : 15.1kg

K1 FEATURE S PICTURE SPECIFICATIONS Accurate, uncolored sound with very low distortion for the best in music and voice re-production Advanced protection circuitry guards against shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults High Damping Factor for tight, clean bass response Extremely versatile, handling a wide range of speaker impedance and output Frequency Response : 20Hz ~ 20kHz, +/-0.25dB Signal to Noise Ratio, A-weighted : >100dB Dampling Factor(10Hz~400Hz) : >3,000 2-ohms Dual Output Power(1kHz) : 750W+750W 4-ohms Dual Output Power(1kHz) : 550W+550W 8-ohms Dual Output Power(1kHz) : 350W+350W 4-ohms Bridge Output Power(1kHz) : 1,500W 8-ohms Bridge Output Power(1kHz) : 1,100W Dimension : 89(H) x 483(W) x 406(D)mm Weight : 14.6kg

K2 FEATURE S PICTURE SPECIFICATIONS Accurate, uncolored sound with very low distortion for the best in music and voice re-production Advanced protection circuitry guards against shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults High Damping Factor for tight, clean bass response Extremely versatile, handling a wide range of speaker impedance and output Frequency Response : 20Hz ~ 20kHz, +/-0.25dB Signal to Noise Ratio, A-weighted : >100dB Dampling Factor(10Hz~400Hz) : >3,000 2-ohms Dual Output Power(1kHz) : 1,250W+1,250W 4-ohms Dual Output Power(1kHz) : 800W+800W 8-ohms Dual Output Power(1kHz) : 500W+500W 4-ohms Bridge Output Power(1kHz) : 2,500W 8-ohms Bridge Output Power(1kHz) : 1,600W Dimension : 89(H) x 483(W) x 406(D)mm Weight : 17.3kg

CP-660 FEATURE S PICTURE SPECIFICATIONS Built for maximum flexibility, with the best watts to dollors ratio around Six independent amplifier channel Six idependent level control on the back panel Super-quiet, variable speed fan with auto trigger for silent Frequency Response : 20Hz ~ 20kHz, +0/-1dB Signal to Noise Ratio, A-weighted : >105dB T. H. : <0.3% Dampling Factor(20Hz~400Hz) : >250 Six-Channel Mode 1Channel/1Load: 4-ohms Output Power(1kHz) : 130W 1Channel/1Load: 8-ohms Output Power(1kHz) : 90W 4Channel/4Load: 4-ohms Output Power(1kHz) : 100W 4Channel/4Load: 8-ohms Output Power(1kHz) : 70W 6Channel/6Load: 4-ohms Output Power(1kHz) : 75W 4Channel/4Load: 8-ohms Output Power(1kHz) : 60W Bridge Mode 2Channel/1Load: 8-ohms Output Power(1kHz) : 250W 4Channel/1Load: 8-ohms Output Power(1kHz) : 200W 6Channel/1Load: 8-ohms Output Power(1kHz) : 150W Dimension : 89(H) x 483(W) x 323(D)mm Weight : 11.4kg

D45 FEATURE S PICTURE SPECIFICATIONS IOC alters of any distortion that exceeds 0.05% to provide proof of distortion free performance Signal presence indicators very the presence of amplifier output Very low noise and wide dynamic range exceed the auido specifica tions for digital compact disc High Damping Factor provides exceptional speaker motion control Frequency Response : 20Hz ~ 20kHz, +/-0.1dB Signal to Noise Ratio, A-weighted : >106dB T. H. D(20Hz~20kHz) : <0.05% Crosstalk(100Hz~1kHz) : >100dB Dampling Factor(DC~400Hz) : >400 4-ohms Dual Output Power(1kHz) : 35W+35W 8-ohms Dual Output Power(1kHz) : 25W+25W 16-ohms Dual Output Power(1kHz) : 20W+20W 8-ohms Bridge Output Power(1kHz) : 70W 16-ohms Bridge Output Power(1kHz) : 50W Dimension : 45(H) x 483(W) x 216(D)mm Weight : 3.9kg

D75A FEATURE S PICTURE SPECIFICATIONS IOC alters of any distortion that exceeds 0.05% to provide proof of distortion free performance Signal presence indicators very the presence of amplifier output Very low noise and wide dynamic range exceed the auido specifica tions for digital compact disc High Damping Factor provides exceptional speaker motion control Frequency Response : 20Hz ~ 20kHz, +/-0.1dB Signal to Noise Ratio, A-weighted : >106dB T. H. D(20Hz~20kHz) : <0.05% Crosstalk(100Hz~1kHz) : >100dB Dampling Factor(DC~400Hz) : >400 4-ohms Dual Output Power(1kHz) : 55W+55W 8-ohms Dual Output Power(1kHz) : 40W+40W 16-ohms Dual Output Power(1kHz) : 25W+25W 8-ohms Bridge Output Power(1kHz) : 110W 16-ohms Bridge Output Power(1kHz) : 80W Dimension : 45(H) x 483(W) x 216(D)mm Weight : 4.3kg

IQ PIP-LITE FEATURE S PICTURE SPECIFICATIONS A Programmable input processor with TCP/IQ and HiQnet(connects to an IQ System or HiQnet System via 100Mb Ethernet Remote control and monitoring of PIP2-compatible Crown amplifiers and some PIP1-compatible Crown amplifiers Faster IQ communications than the IQ bus Can be connected to the same network used to pass CobraNet audio Frequency Response : 20Hz ~ 20kHz, +/-0.5dB Dynamic Range(A-weighted, 20Hz~20kHz) : >110dB T. H. D(1kHz) : <0.05% Input Impedance : 20kohms balanced and 10kohms unbalanced Maxium Input Level : +20dBu Data Acquisition : Eight channel, 12bit Analog to Digital Converter running at 100k sanokes per second Network Connector : RJ-45 Aux Connector : RJ-11 CH1 and CH2 balanced inputs : 3-pin, 5mm removable barrier block Memory Backup : 4M bit nonvolatile Flash Memory for backup of run-time settings, presets and program storage

IQ PIP-USP3 FEATURE S PICTURE SPECIFICATIONS 100Mb Ethernet single-plug solution for HiQnet or TCP/IQ control and monitoring 24-bit conversion with 32-bit, floating point DSP processing 64 assignable filters with 9 different filter types including all pass filter Over 2 second of delay available per channel 10 user selectable presets Sine-wave generator Frequency Response : 20Hz ~ 20kHz, +/-0.5dB Dynamic Range(A-weighted, 20Hz~20kHz) : >105dB Maxium Input Level : +20dBu ADC Conversion : 24-bit, 250us latency DAC Conversion : 24-bit, 135us latency Network Connector : RJ-45 Aux Connector : RJ-11 CH1 and CH2 balanced inputs : 3-pin, 5mm removable barrier block Memory Backup : 512kbyte non-volatile Flash Memory for backup of run- time parameters, presets, and program storage Communications : 100Mb Fast Ethernet conforming to IEEE

IQ PIP-USP3/CN FEATURE S PICTURE SPECIFICATIONS 100Mb Ethernet single-plug solution for HiQnet or TCP/IQ control and monitoring Analog audio inputs allow CobraNet network audio input, CobraNet audio backup, or a hard-wire emergency override of CobraNet audio 64 assignable filters with 9 different filter types including all pass filter Over 2 second of delay available per channel 10 user selectable presets Frequency Response : 20Hz ~ 20kHz, +/-0.5dB Signal to Noise Ratio, A-weighted : >70dB Dynamic Range(A-weighted, 20Hz~20kHz) : >103dB Maxium Input Level : +20dBu T.H.D + Noise(20Hz~20kHz) : >0.005% Crosstalk(1kHz) : >60dB ADC Conversion : 18-bit, 312us latency Network Connector : RJ-45(Premary & Secondary) Aux Connector : RJ-11 Balanced Audio Input Connector : single 5-pin removable brrier-strip connector for both channels

IQ INTERFACE3 FEATURE S PICTURE SPECIFICATIONS Connects up to four separate IQ Bus loops Blue Power indicators on the front and rear panels Yellow Loop Status indicators on the front and rear panel show IQ Bus Loop data activity RJ-45 connectors for IQ Bus input and output for easy and secure IQ Bus connections Support both the original IQ and newer IQ 2 protocols Connector : IQ Bus input-four RJ45, IQ Bus output-four RJ45 Crown Bus Data Communication Data Rate : 38.4k baud Data Format : Asynchronous binary serial data Interface Type : 20-milliamp current loop Operation : Half duplex Intelligence : 16-bit microprocessor Transmission Distance : Variable from 200 to 3000feet Host Communication Data Rate : 9,600, 19,200, 38,400, 57,600, 115,200 Data Format : Asynchronous binary serial data Interface Type : RS232 Operation : Half duplex Data Buffer : 255bytes Intelligence : 16-bit microprocessor RS232 Transmission Distance : 50 feet Dimension : 44(H) x 483(W) x 165(D)mm Weight : 2.8kg

IQ RPT3 REPETER FEATURE S PICTURE SPECIFICATIONS Increases the length of an IQ Bus loop by as much as 1000feet Blue Power indicators on the front and rear panels Yellow Loop Status indicators on the front and rear panel show IQ Bus Loop data activity RJ-45 connectors for IQ Bus input and output for easy and secure IQ Bus connections Support both the original IQ and newer IQ 2 protocols Connector : IQ Bus input-four RJ45, IQ Bus output-four RJ45 Crown Bus Data Communication Data Rate : 38.4k baud Data Format : Asynchronous binary serial data Interface Type : 20-milliamp current loop Operation : Half duplex Intelligence : 16-bit microprocessor Transmission Distance : Variable from 200 to 3000feet Dimension : 44(H) x 483(W) x 165(D)mm Weight : 2.8kg

XTi1000 FEATURE S PICTURE SPECIFICATIONS Integrated speaekr presets with LCD front panel display Advanced protection circuitry guards against; shorted outputs, open circuits, DC, mismatched loads, general overheating, high frequency overloads and interna faults Speaker presets for crossover frequencies, EQ, Limiting, delay Speakon and binding post outputs, XLR inputs and loop-thru Comprehensive LEDs status per channel Frequency Response : 20Hz ~ 20kHz, +/-0.25dB Signal to Noise Ratio, A-weighted : >105dB Crosstalk(20Hz~1kHz) : >80dB Common Mode Rejection(20Hz~1kHz) : >45dB Maximum Input Level : +22dBu Dampling Factor(20Hz~400Hz) : >500 DSP Section EQ : 4band paragraphic per channel, boost/cut +/-12dB Filter : Highpass and lowpass per channel Delay : for signal alignment of driver; 5ms total delay Subharmonic Synthesizer : Add low frequency content Output Limiter : prevents clipping Presets : 10user speaker presets 2-ohms Dual Output Power(1kHz) : 700W+700W 4-ohms Dual Output Power(1kHz) : 500W+500W 8-ohms Dual Output Power(1kHz) : 275W+275W 4-ohms Bridge Output Power(1kHz) : 1,400W 8-ohms Bridge Output Power(1kHz) : 1,000W Dimension : 89(H) x 483(W) x 311(D)mm Weight : 7.7kg

XTi2000 FEATURE S PICTURE SPECIFICATIONS Integrated speaekr presets with LCD front panel display Advanced protection circuitry guards against; shorted outputs, open circuits, DC, mismatched loads, general overheating, high frequency overloads and internal faults Speaker presets for crossover frequencies, EQ, Limiting, delay Speakon and binding post outputs, XLR inputs and loop-thru Comprehensive LEDs status per channel Frequency Response : 20Hz ~ 20kHz, +/-0.25dB Signal to Noise Ratio, A-weighted : >105dB Crosstalk(20Hz~1kHz) : >80dB Common Mode Rejection(20Hz~1kHz) : >45dB Maximum Input Level : +22dBu Dampling Factor(20Hz~400Hz) : >500 DSP Section EQ : 4band paragraphic per channel, boost/cut +/-12dB Filter : Highpass and lowpass per channel Delay : for signal alignment of driver; 5ms total delay Subharmonic Synthesizer : Add low frequency content Output Limiter : prevents clipping Presets : 10user speaker presets 2-ohms Dual Output Power(1kHz) : 1,000W+1,000W 4-ohms Dual Output Power(1kHz) : 800W+800W 8-ohms Dual Output Power(1kHz) : 475W+475W 4-ohms Bridge Output Power(1kHz) : 2,000W 8-ohms Bridge Output Power(1kHz) : 1,600W Dimension : 89(H) x 483(W) x 311(D)mm Weight : 7.7kg

XTi4000 FEATURE S PICTURE SPECIFICATIONS Integrated speaekr presets with LCD front panel display Advanced protection circuitry guards against; shorted outputs, open circuits, DC, mismatched loads, general overheating, high frequency overloads and internal faults Speaker presets for crossover frequencies, EQ, Limiting, delay Speakon and binding post outputs, XLR inputs and loop-thru Comprehensive LEDs status per channel Frequency Response : 20Hz ~ 20kHz, +/-0.25dB Signal to Noise Ratio, A-weighted : >105dB Crosstalk(20Hz~1kHz) : >80dB Common Mode Rejection(20Hz~1kHz) : >45dB Maximum Input Level : +22dBu Dampling Factor(20Hz~400Hz) : >500 DSP Section EQ : 4band paragraphic per channel, boost/cut +/-12dB Filter : Highpass and lowpass per channel Delay : for signal alignment of driver; 5ms total delay Subharmonic Synthesizer : Add low frequency content Output Limiter : prevents clipping Presets : 10user speaker presets 2-ohms Dual Output Power(1kHz) : 1,600W+1,600W 4-ohms Dual Output Power(1kHz) : 1,200W+1,200W 8-ohms Dual Output Power(1kHz) : 650W+650W 4-ohms Bridge Output Power(1kHz) : 3,200W 8-ohms Bridge Output Power(1kHz) : 2,400W Dimension : 89(H) x 483(W) x 311(D)mm Weight : 7.7kg

CDi1000 FEATURE S PICTURE SPECIFICATIONS Integrated speaekr presets with LCD front panel display Advanced protection circuitry guards against; shorted outputs, open circuits, DC, mismatched loads, general overheating, high frequency overloads and internal faults Speaker presets for crossover frequencies, EQ, Limiting,compress ion, delay and subharmonic synthesis Frequency Response : 20Hz ~ 20kHz, +/-0.25dB Signal to Noise Ratio, A-weighted : >105dB Crosstalk(20Hz~1kHz) : >80dB Common Mode Rejection(20Hz~1kHz) : >45dB Maximum Input Level : +22dBu Dampling Factor(20Hz~500Hz) : >500 DSP Section EQ : 6band paragraphic per channel, boost/cut +/-15dB Filter : Highpass and lowpass per channel Delay : for signal alignment of driver; 50ms total delay Output Limiter : prevents clipping(-3,-6,-12dB) Presets : 20user speaker presets 2-ohms Dual Output Power(1kHz) : 700W+700W 4-ohms Dual Output Power(1kHz) : 500W+500W 8-ohms Dual Output Power(1kHz) : 275W+275W 70V Dual Output Power(1kHz) : 500W+500W 4-ohms Bridge Output Power(1kHz) : 1,400W 8-ohms Bridge Output Power(1kHz) : 1,000W Dimension : 89(H) x 483(W) x 311(D)mm Weight : 8.6kg

CDi2000 FEATURE S PICTURE SPECIFICATIONS Integrated speaekr presets with LCD front panel display Advanced protection circuitry guards against; shorted outputs, open circuits, DC, mismatched loads, general overheating, high frequency overloads and internal faults Speaker presets for crossover frequencies, EQ, Limiting,compress ion, delay and subharmonic synthesis Frequency Response : 20Hz ~ 20kHz, +/-0.25dB Signal to Noise Ratio, A-weighted : >105dB Crosstalk(20Hz~1kHz) : >80dB Common Mode Rejection(20Hz~1kHz) : >45dB Maximum Input Level : +22dBu Dampling Factor(20Hz~500Hz) : >500 DSP Section EQ : 6band paragraphic per channel, boost/cut +/-15dB Filter : Highpass and lowpass per channel Delay : for signal alignment of driver; 50ms total delay Output Limiter : prevents clipping(-3,-6,-12dB) Presets : 20user speaker presets 2-ohms Dual Output Power(1kHz) : 1,000W+1,000W 4-ohms Dual Output Power(1kHz) : 800W+800W 8-ohms Dual Output Power(1kHz) : 475W+475W 70V Dual Output Power(1kHz) : 800W+800W 4-ohms Bridge Output Power(1kHz) : 2,000W 8-ohms Bridge Output Power(1kHz) : 1,600W Dimension : 89(H) x 483(W) x 311(D)mm Weight : 8.6kg

DSi8M FEATURE S PICTURE SPECIFICATIONS 8channels for monitoring processor or ammplifier inputs All inputs and outputs are balanced to interface with new cinema processors Input levels for processor and power amps can be adjusted independently No level jumps when swithcing between processor and amplifiers Bargraph display may be calibrated to the reference level for your theather Front Panel Controls and Indicators Channel Select Buttons and LEDs : 8pushbutton switches, 1 for each input channel Volume Control : Rotary potentiometer with knob controls the volume of the internal or external speaker VU Bargraph Meter : 12segment meter displays input level of selected channels from –40VU to +3VU Amplifier Outputs Connector1 : connects to the power amplifier speaker output for the Ls,Ls,Bsl, Bsr,Sw Amplifier Outputs Connector2 : connects to the power amplifier speaker output for the Lh,Ll,Ch,Cl,Rh,Rl HD-15 Connector1 : Connects to Ls/Rs amplifier HD-15 Connector2 : Connects to Bsl/Bsr amplifier HD-15 Connector3 : Connects to Rl/Rh amplifier HD-15 Connector4 : Connects to Sw amplifier HD-15 Connector5 : Connects to Ll/Lh amplifier HD-15 Connector6 : Connects to Cl/Ch amplifier Main Input Connector : 25-pin D-sub connector connects to the main outputs of the processor Dimension : 89(H) x 483(W) x 244(D)mm Weight : 4.63kg

DSi1000 FEATURE S PICTURE SPECIFICATIONS Automatic presets for popular JBL cinema speaker system for quick Intuitive front panel LCD screen gudides installers through setup Onboard digital signal processing includes crossovers, EQ filters delay, and output limiting Computer connectivity via USB allows fast setup and configuration with HiQnet TM System Architect TM software Rear panel HD-15 connector provides easy input/output connectivi ty between Dsi amplifiers and new Dsi-8M System monitor Frequency Response : 20Hz ~ 20kHz, +/-0.25dB Signal to Noise Ratio, A-weighted : >105dB Crosstalk(20Hz~1kHz) : >80dB Common Mode Rejection(20Hz~1kHz) : >45dB Maximum Input Level : +22dBu Dampling Factor(20Hz~500Hz) : >500 DSP Section EQ : 6band parametric filter per channel, boost/cut +/-15dB Filter : Highpass and lowpass per channel Delay : for signal alignment of driver; 50ms total delay Output Limiter : prevents clipping(-3,-6,-12dB) Presets : 5user speaker presets 2-ohms Dual Output Power(1kHz) : 700W+700W 4-ohms Dual Output Power(1kHz) : 500W+500W 8-ohms Dual Output Power(1kHz) : 275W+275W 4-ohms Bridge Output Power(1kHz) : 1,400W 8-ohms Bridge Output Power(1kHz) : 1,000W Dimension : 89(H) x 483(W) x 311(D)mm Weight : 8.6kg

DSi2000 FEATURE S PICTURE SPECIFICATIONS Automatic presets for popular JBL cinema speaker system for quick Intuitive front panel LCD screen gudides installers through setup Onboard digital signal processing includes crossovers, EQ filters delay, and output limiting Computer connectivity via USB allows fast setup and configuration with HiQnet TM System Architect TM software Rear panel HD-15 connector provides easy input/output connectivi ty between Dsi amplifiers and new Dsi-8M System monitor Frequency Response : 20Hz ~ 20kHz, +/-0.25dB Signal to Noise Ratio, A-weighted : >105dB Crosstalk(20Hz~1kHz) : >80dB Common Mode Rejection(20Hz~1kHz) : >45dB Maximum Input Level : +22dBu Dampling Factor(20Hz~500Hz) : >500 DSP Section EQ : 6band parametric filter per channel, boost/cut +/-15dB Filter : Highpass and lowpass per channel Delay : for signal alignment of driver; 50ms total delay Output Limiter : prevents clipping(-3,-6,-12dB) Presets : 5user speaker presets 2-ohms Dual Output Power(1kHz) : 1,000W+1,000W 4-ohms Dual Output Power(1kHz) : 800W+800W 8-ohms Dual Output Power(1kHz) : 475W+475W 4-ohms Bridge Output Power(1kHz) : 2,000W 8-ohms Bridge Output Power(1kHz) : 1,600W Dimension : 89(H) x 483(W) x 311(D)mm Weight : 8.6kg

DSi4000 FEATURE S PICTURE SPECIFICATIONS Automatic presets for popular JBL cinema speaker system for quick Intuitive front panel LCD screen gudides installers through setup Onboard digital signal processing includes crossovers, EQ filters delay, and output limiting Computer connectivity via USB allows fast setup and configuration with HiQnet TM System Architect TM software Rear panel HD-15 connector provides easy input/output connectivi ty between Dsi amplifiers and new DSi-8M System monitor Frequency Response : 20Hz ~ 20kHz, +/-0.25dB Signal to Noise Ratio, A-weighted : >105dB Crosstalk(20Hz~1kHz) : >80dB Common Mode Rejection(20Hz~1kHz) : >45dB Maximum Input Level : +22dBu Dampling Factor(20Hz~500Hz) : >500 DSP Section EQ : 6band parametric filter per channel, boost/cut +/-15dB Filter : Highpass and lowpass per channel Delay : for signal alignment of driver; 50ms total delay Output Limiter : prevents clipping(-3,-6,-12dB) Presets : 5user speaker presets 2-ohms Dual Output Power(1kHz) : 1,600W+1,600W 4-ohms Dual Output Power(1kHz) : 1,200W+1,200W 8-ohms Dual Output Power(1kHz) : 650W+650W 4-ohms Bridge Output Power(1kHz) : 3,200W 8-ohms Bridge Output Power(1kHz) : 2,400W Dimension : 89(H) x 483(W) x 311(D)mm Weight : 8.6kg