1 Product Presentation January 2010

2

3 Normal BinROXELL Bin Old feed Normal bin: ‘centerflow’ feed flows first in center  bridging ‘mass flow’ feed flows evenly in center + at the sides Mass flow Bridging Guaranteed feed flow

4 Mass flow with Roxell bin Special smooth surface (MB quality metal sheets) No bolts in feed flow at hopper bottom No bolts in feed flow at bottom collar Guaranteed feed flow

5 Metal binPolyester bin Heat transfer: only via bin surface = Green house effect! feed temperature , humidity evaporates, air humidity  DAY NIGHT Inside temperature   condensation!! Light reflection! condensation in heat transfer via bin surface + heat transfer via sunlight Guaranteed feed flow

6 outside temperature bin in galvanized sheet polyester bin source: “Institute of Agricultural Engineering and Pluimveehouderij ” Temperature inner sideAir temperature in binFeed temperature 20 cm from the side hhh °C Guaranteed feed flow

7 galvanisation grams/m² (normal: 275 grams/m²) Plastified bolts Plastic caps 25 % more galvanisation: 5 year warranty against corrosion

8 double sealing plates: 1 mm to 1.50 mm thick standard 2 windows reinforcement braces braces from legs to center DIN NORM Approved with German DIN norm

9 Identikit Installation time: 3 skilled people: 1 bin per day. (*) Capacity in tons is based on a specific weight of 0,65 kg/dm³. (**) Bins with safety cage on the ladder: plus 32 cm. (**) Bins with safety cage on the ladder: plus 23 cm. (**) Bins with safety cage on the ladder: plus 1 cm. (**) Bins with safety cage on the ladder: no extra height. Day Bins are not available with ladder, roof ladder, mechanic and pneumatic fill system.

10  Roxell supplies a special coupling for the inlet pipe, that fits to the hose of the bulk delivery truck. FACTSBENEFITS Feed distributor in the inlet. Rubber joint between cover and roof. Plastic exhaust pipes. Optimal aeration during filling. No feed separation. Safety against overpressure. Feed is not compressed. Bins with pneumatic filling

11 FACTSBENEFITS Cover opens from the ground. Cover opens very wide. Easy to open. The bin can easily and safely be filled with an auger. Bins with auger filling

12 FACTSBENEFITS Flex-Auger above bin Fixed or suspended on bin Water proof connections Possibility to avoid truck on the farm Good filling of the bin Bins with overhead filling  Flex-Auger + connection to feed bin is part of the overhead system

13 Ladders start at the bottom ring.  Bins 2.10 m, 2.75 m and 3.20 m have also a roof ladder.  Roxell recommends that you ALWAYS install a safety cage on the ladder. A hinged ladder is available Ladders

14 You install this bin valve when you want to empty your bin by hand without Flex-Auger.  The 1.80 m bin has EXTENDED legs and it is 48 cm higher!. You install this hopper valve when you want to have the extra possibility of emptying your bin with transport system also by hand. Bin and hopper valve

15 You install this entry hatch when you want to enter your bin for inspection / cleaning. The entry hatch includes an inner door (which is sealed very tight by the inner pressure from the feed) and an outer door (which makes the entry hatch water proof). The hinge at the bottom of the entry hatch can be used for the hook-in ladder Entry hatch

16 Bin filling auger Cover for motor FA90 – 450 rpm Capacity = 3000 kg/h Cover 75 cm 120 cm Hopper 80 kg 6 m Max 60° 740 cm Use steel tubes and elbows for feed for Layers !