Dave Yao Vice President of Worldwide Sales Introduction Dave Yao Vice President of Worldwide Sales

Cambrios Technologies Corp. Leader in Transparent Conductors ClearOhm Sensor Supply Chain ClearOhm Inks Coated Film Touch Sensor Maker ODM’s Founded in 2002 by scientists at MIT and University of California, Santa Barbara Design and manufacturing in Sunnyvale, CA with offices in Japan and Taiwan Strategic investors including Nissha Printing, Toray and Samsung Strong IP Portfolio: >175 pending patent applications, >22 issued or allowed patents Phones, AIO’s and Monitors with Cambrios technology based touch commercially available in the market

Changing Requirements for Transparent Conductors Difficult to achieve with ITO Higher Conductivity Ability to conform to bends and curves Flexibility Lower Cost

Transparent Conductors: Alternatives to ITO Metal Mesh CNTs and Nanobuds Conducting Polymers Graphene Silver Nanowires

Other ITO Replacement Technologies Cannot Beat ClearOhmTM

Silver Nanowires Pros Cons High conductivity High transparency Inexpensive and easy to use Commercially used in many products Well established and growing supply chain Cons Increased haze < 30 ohms/sq Useful in some high-conductivity applications Plan View 70 degree tilt

Enabling Pro-Cap touch Panels for Ultrabook and Monitors 2/21/12

Improved Manufacturing Yields ClearOhm™ is not brittle like ITO Improved yields during bonding (no cracking) flexible and curved form factors 2/21/12

Touch Panel Supply Chain Ready for Production (Announced Relationships) ClearOhm™ Inks Cambrios Film Makers Okura, Hitachi Chem, Toray, DIC, ShinEtsu LGE, Shinwha, and other Korean suppliers China and US based suppliers Sensor Makers eTurboTouch LGE Nissha Printing CNi ShinEtsu Others

Products Using ClearOhm™ Technology 15” Point Of Sale Monitor 23” Monitors/AIOs 13.3” Intel Reference Design Low cost AND high performance Invisible patterns, even in sunlight Glass sensor like appearance

Advantages of ClearOhm Touch Sensors FF sensor 0.2-0.4mm even for 27” sensor OGS on Gorilla Glass adds <0.05mm Lower cost than ITO Cost advantage increases with size Platform Designs 92% compared to 90% for ITO OGS sensor Brighter displays Longer battery life Invisible patterns & no moiré patterns Higher Conductivity than ITO on film Enables laptop and AiO/monitor touch panels Faster Response Higher Transmission Thinner, Lighter, Stronger Cost Effective Animated radial list with picture Select the SmartArt graphic on the slide. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Fade. (Intermediate) Also on the Animations tab, in the Timing group, do the following: In the Start list, select With Previous. To reproduce the SmartArt effects on this slide, do the following: In the Duration box, enter 1.00 seconds. On the Home tab, in the Slides group, click Layout, and then click Blank. Also on the Animations tab, in the Animation group, click Effect Options, and then click One by One. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Radial List, and then click OK to insert the graphic into the slide. Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow to expand the contents of the list. In the Animation Pane, select the first effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Grow & Turn. To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullets, enter the text for the three, smaller circle shapes in the graphic. In the second-level bullets, type the text for the bullets to the right of the three, smaller circle shapes. In the Animation Pane, select the second effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe. On the slide, select the SmartArt, and then on the Design tab, in the Themes group, click Colors, and under Built-In, select Technic. Press and hold CTRL, and on the slide, select the large circle and all three small circles. In the Start list, select After Previous. In the Speed list, select 0.50 seconds. On the Home tab, in the Drawing group, click the arrow to the right of Shape Effects, point to Preset, and under Presets and select Preset 2 (first row, the second option from the left). Also on the Animations tab, in the Animation group, click Effect Options, and then click From Left. In the Animation Pane, select the third effect in the list (fade entrance effect). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom. On the slide, click on the picture icon in the center of the large circle. In the Insert Picture dialog box, select a picture, and then click Insert. (Notes: (1) If the picture in the large circle is distorted, tile the picture as a texture by selecting the large, picture-filled circle, and then on the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane check Tile picture as texture. (2) If necessary, change the tile position of the picture within the shape. To do this, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Offset X and Offset Y boxes to reposition the focal point of the picture. To resize the picture, in the Format Shape dialog box, in the Fill pane, under Tiling options, enter values into the Scale X and Scale Y boxes.) In the Duration box, enter 1.00 second. In the Animation Pane, select the fourth effect in the list (fade entrance effect). On the Animations tab, in the Timing group, in the Start list, select With Previous. Press and hold CTRL, and in the Animation Pane, select the fifth and eighth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Wipe. Also on the Animations tab, in the Timing group, in the Duration box, enter 0.50 seconds. Select the top, small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gray-25%, Background 2, Darker 75% (fifth row, the third option from the left). Press and hold CTRL, and in the Animation Pane, select the sixth and ninth effects in the list (fade entrance effects). On the Animations tab, in the Animation group, click More, and then under Entrance click Zoom. Also on the Animation tab, in the Timing group, do the following: Select the middle small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Gold, Accent 2 (first row, the sixth option from the left). In the Duration list, select 0.50 seconds. Press and hold CTRL, and in the Animation Pane, select the seventh and tenth effects in the list (fade entrance effects). On the Animations tab, in the Timing group, in the Start list select After Previous. Select the bottom small circle in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane click Solid fill, and then in the Color list select Lavender, Accent 3 (first row, the seventh option from the left). To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Radial. Click the button next to Direction, and then click From Center (third option from the left). Press and hold CTRL, and select all three lines connecting the large circle to the three smaller circles. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, do the following: Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear in the slider. Also under Gradient stops, customize the gradient stops that you added as follows: Click Line Color in the left pane, and in the Line Color pane click Solid line. Select the first stop in the slider, and then do the following: Also in the Line Color pane, in the Color list select White, Background 1, Darker 25% (fourth row, first option from the left). In the Position box, enter 0%. Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left). Click Line Style in the left pane, and in the Line Style pane, in the Width box enter 2.5 pt. Also in the Line Style pane, in the Dash type list select Round Dot (second option from the top). Select the last stop on the slider, and then do the following: Press and hold CTRL, and select all three text boxes in the SmartArt graphic. On the Home tab, in the Font group, in the Font Size box enter 22 pt. In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 35% (fifth row, first option from the left). To reproduce the animation effects on this slide, do the following:

Reducing Sensor Cost: Lower Process & Material Cost Lower Coating Cost High Speed Roll to Roll Solution Coating Lower Patterning Cost Laser Patterning Hitachi Chemical TCTF: Integrated Resist/OCA/nanowire Lower Stack Cost Touch on Plastic Lens GF1/GF2 structure eliminate OCA

Managing Touch Screen Designs Different Mesh Film and Sensor for each Display 1080p 900p 768p

Managing Touch Screen Designs Different Mesh Film and Sensor for each Display 1080p 900p 768p Same Film and Sensor for each Display 1080p 900p 768p Silver nanowires enable platform designs

Platform Design for Lower Cost Lower Design Cost Lower Testing & Integration Cost Lower Inventory/Supplier Management Cost

Case Study: Hitachi Chemical Transparent Conductive Transparent Film (TCTF)

Enabling Innvoative New Film Products 5 µm thick photo-patternable transparent conducting layer that can be laminated to any substrate Hitachi Dry Resist + Cambrios ClearOhm™ Technology = Cover film Base film (PET film)

Enabling Touch Using TCTF Low temperature lamination Compatible with film substrates or strengthened glass (Gorilla Glass) Only add 5um per sensor layer Excellent transmission and color (low b*) Sheet or Cell process More cost effective process than ITO Y-Electrode X-Electrode 100µｍ TCTF Lamination X-Electrode Formation TCTF Lamination And Y-Electrode Formation Photosensitive Layer Conductive Layer Substrate 10µm

Traditional ITO Touch Sensor Dielectric Deposit Layer Resist Formation Patterning Etching Stripping

Fabrication Using Transfer Film Substrate TCT Film Lamination Patterning TCT Film Lamination Patterning Transfer film process uses 1/3 the steps as traditional ITO sensor

Cambrios ClearOhm™: Enabling Emerging Applications and Markets

Large Emerging Markets 3D TV’s Flexible Displays OLED Displays/Lighting Solar Cells Automotive

Flexible and Formable Devices Resistance change in Bending Test R 3mm Resistance (Ohms) # of test Times (“round trip”) Courtesy AUO Data Courtesy Nissha Printing

OLED Value Proposition High conductivity in single material – no need for grids Same or better efficiency as ITO Lifetimes similar to ITO No angle dependence of color R2R manufacturing for lighting 10cm x 10 cm ClearOhm OLED Tile

Flexible and Transparent OPV Roll to roll cells using ClearOhm demonstrated World record for organic photovoltaics 12% efficiency Production facility under construction Image courtesy: Heliatek

Summary Cambrios Silver Nanowires are enabling and accelerating the adoption of touch Cost effective and high performance Numerous products on the market Robust supply chain with rapidly expanding capacity Enabling a new world of applications, form factors, and design flexibility Effective transparent electrode for OLEDs, OPV and other applications A big THANK YOU to our customers for adopting Cambrios technology

For further information: Web: www.cambrios.com Email: info@cambrios.com