Advanced Humidity Control

Energy Efficient Desiccant Based Dehumidification New class of desiccants that regenerate at lower temperatures Now able to utilize DX condenser heat for regeneration. Unlike traditional high temp regeneration (gas or electric) we are able to deliver low dew points with much less energy. This technology has opened up commercial markets for desiccant systems.

DES/DX Series DES/DX Standard- Return air – up to 20%OA – Available in 300, 1000, 2000, 4000, 6000, 8000, 10000,12,000 cfm models DES/DX w/ERV- 100% O/A – Available in 2000, 3000, 4000, 6000, 8000, 10000, cfm models DES/DX CR Low Temperature Configuration – Available in 2000, 4000, 6000, 8000, 10000,12000 cfm models

DES/DX

DES/DX Standard Configuration

DES/DX Concept DX with Reheat DES/DX Delta H

Case Study- injection molding plant expansion Maintain space at 73F/45 DP Provide 1500 cfm of OA for pressurization Space moisture load of 150 lb/h min Existing plant using electric desiccant dehum DES/DX selected over electric desiccant for the expansion due to energy savings

Electric Desiccant Dehumidifier Existing

Portola Packaging-Injection Molding Plant DES/DX

DES/DX vs Electric Dehumidifier DES/DX Outside Air1500 cfm Total Flow10000 cfm H 2 O Reduction180 lb/h Elect Power25.0 KW Op Cost$.025/lb H 2 O Electric Desiccant Outside Air1500 cfm Total Flow6000 cfm H 2 O Reduction180 lb/h Elect Power94.5 KW Op Cost$.077/lb H 2 O 67.5% Reduction in Energy

Portola Packaging

Data Center DES/DX with CW

10000 DES/DX HYD Data Center

100% O/A DES/DX w/ERV Dedicated O/A

DES/DX ERV series

DES/DX ERV Applications 100% OA delivering dew points <45F Ventilation air for chilled beam applications Ventilation air for VRF systems Schools, Hospitals, Industrial

DES/DX w/ERV 100% O/A

DES/DX ERV series

Energy Savings

DES/DX ERV Combined With VRF School Application- South Carolina

Crestview Elementary Greenville, SC

Dyersville School Project Chilled Beam 100%OA CFM DES/DX ERV 100% OA School Project Chilled beam application Low dew point required Delivered 41F DP

DES Wheel B C D FG H E/A O/A J I A E/A R/A ECW Wheel Evap 2 Cond 2 Unit Top View S/A Evap 1 Cond 1 E Summer Operation ABCDEFGHIJ Drybulb (F) Grains/lb Enthalpy (Btu/lb) Flowrate (cfm) DES/DX ERV CW

DES Wheel B C D FG H E/A O/ A J I A E/ A R/ A ECW Wheel Eva p 2 Cond 2 Unit Top View S/A Evap 1 Cond 1 E DES/DX ERV Performance Cooling Effect652500Btu/hr 54.4tons H2O Reduction68.1gr/lb 437.8lb/hr Operating Cost360.7Btu/lb H2O ComponentsPower(W) Comp 113 ton13100 Comp 213 ton15400 Des WheelDES 966 6RPH ERV WheelECW 966 Regen Motor7.5 HP 3192 Process Motor15 HP8659 ERV Motor10 HP 5927 Total KW46.28 CW

10000 DES/DX ERV Shipping

100% OA Chilled Water/DES/DX for Chilled Beam - Hospital DES/DX ERV 60F/43dp

Seton Medical DES/Hyd Utilizing 120F Waste Hot Water

Seton Medical

Advanced Humidity Control DES/DX CR Low Temperature Dehumidification

DES/DX CR Applications Cold storage dehumidification – Archive storage – Refrigerated warehouses Slipstream dehumidification – Improve humidity control with existing systems Ice rink dehumidification – Branded as Novel-Ice Temperature range of 45F to 75F

DES/DX CR Low Temp Dehumidification

DES/DX CR

Processing slipstreams Solve problems where the existing AHUs lack the latent capacity Processing a slipstream downstream from an existing coil through a DES/DX CR unit will increase the latent capacity significantly Further dehumidification with free reheat

600 DES/DX CR Low Temp Dehum Sub freezing DP Energy efficient dehumidification

Univ Hospital Med Center, Miami 600 DES/DX CR

Novel-Ice

Novel-Ice ERV with Energy Recovery

DES/DX CR energy Comparison to Direct fired NG desiccant units

Energy Comparison

Thank you