© Effect Of Geotextiles On The Load-Carrying Capacity And Deformation Characteristics Of Sabkha Soil Aiban, SA; Siddiqi, ZU; Al-Amoudi, OSB; Al-Ahmadi, HM; Asi, IM THOMAS TELFORD PUBLISHING, GEOSYNTHETICS INTERNATIONAL; pp: ; Vol: 13 King Fahd University of Petroleum & Minerals Summary Road construction on sabkha terrain along the coastal regions of the Arabian Gulf and the Red Sea is often faced with different types of damage due to the low bearing capacity of sabkha deposits, especially when they are wetted. Such conditions necessitate the improvement of sabkha prior to any construction. The purpose of this investigation was to upgrade the load-carrying capacity of sabkha soil using geotextiles by varying the geotextile type, base thickness, moisture condition and the magnitude of the deviatoric stress. To achieve these objectives, a special mould was fabricated to accommodate the soil - fabric - aggregate (SFA) systems. The performance of SFA systems was evaluated by measuring the permanent deformation under the applied 'dynamic' load. Results of this study indicate that the selection of an appropriate geotextile type can bring about significant improvement in the load- carrying capacity of the water-sensitive sabkha soils, particularly under soaked conditions. The inclusion of a geotextile layer on top of the sabkha subgrade reduced the thickness of the graded base layer by 34%. In addition, the geotextile increased the stiffness of the sabkha subgrade and reduced the permanent deformation after a certain number of load reputations. References: *ASTM INT, D1557 ASTM *ASTM INT, D422 ASTM *ASTM INT, D4491 ASTM Copyright: King Fahd University of Petroleum & Minerals;

© *ASTM INT, D4632 ASTM *ASTM INT, D4716 ASTM *ASTM INT, D4751 ASTM *ASTM INT, D5199 ASTM *ASTM INT, D5261 ASTM *EN, EN EUR COMM S ABDULJAUWAD SN, 1994, J GEOTECH ENG-ASCE, V120, P1939 AIBAN SA, 1998, P 6 INT C GEOS IFAI, V1, P805 AIBAN SA, 1999, AR1461 KACST AIBAN SA, 2000, GEOSYNTH INT, V8, P193 AKILI W, 1981, P S GEOT PROBL SAUD, V2, P775 AKPOKODJE EG, 1985, Q J ENG GEOL, V18, P173 ALAMOUDI OSB, 1991, P S RECENT ADV GEOTE, V3, P7 ALAMOUDI OSB, 1992, ENG GEOL, V33, P111 ALAMOUDI OSB, 1994, ASCE J GEOTECHNICAL, V120, P1900 ALAMOUDI OSB, 1994, ENG GEOL, V36, P279 ALAMOUDI OSB, 1995, ARAB J SCI ENG, V20, P405 BARKSDALE RD, 1989, 315 TRANSP RES BOARD DELMAS P, 1986, P 3 INT C GEOT AUSTR, P1015 ELLIS CI, 1974, 7874 TRRL FARWANA TA, 1988, P 3 IRF MIDD E REG M, V3 FOOKES PG, 1985, Q J ENG GEOL, V18, P101 GHAZALI FM, 1985, P 2 SAUD ENG C, V1, P286 GIROUD JP, 1981, J GEOTECHNICAL ENG D, V107, P1233 KINSMAN DJJ, 1966, 2 S SALT, V1, P302 KOERNER RM, 1980, CONSTRUCTION GEOTECH LEONG KW, 2000, GEOTECHNICAL SPECIAL, V103, P383 PERKINS SW, 1999, GEOSYNTH INT, V6, P347 RAMALHOORTIAGO JA, 1982, P 2 INT C GEOT IND F, P353 ROBNETT Q, 1982, P 2 INT C GEOT LAS V, P381 SIDDIQI ZU, 2000, THESIS KING FAHD U P STIPHO AS, 1989, ENG GEOL, V26, P181 WAHHAB HIA, 1990, ARAB J SCI ENG, V15, P385 WEBSTER SL, 1977, S771 US ARM CORPS EN WEBSTER SL, 1978, S786 US ARM CORPS EN For pre-prints please write to: Copyright: King Fahd University of Petroleum & Minerals;