Reloading MANUAL GUIDE Let’s Get Started… S&S IT INNOVATIONS TECHNOLOGY SDN BHD SPG Auto Park

Balance for SPG Auto Park Press Reload Button

1 Device will show reload screen Enter 16 digit pin in textbox Press Reload Button Message showing reload in progress 4

If 16 digit pin is invalid 1 Make sure reload pin is correct (Double check) a 2 If 16 digit pin is valid b Message showing new balance 1 a 2 3 Press exit button 3 b

New balance after reloading 1 1 New validity date 2 2 Ready to use

USING SMS TO ACTIVATE SPG HOW TO SEND SMS - Step by step S&S IT INNOVATIONS TECHNOLOGY SDN BHD SPG Auto Park

Forget to Switch On the device Battery is empty Forget to start the device Do Not Worry it can be handled Just follow the steps Device no signal ENCOUNTER THESE PROBLEMS?

Sent the SMS to STEP TO START PARKING Message sent Wait FOR the feedback, to know the result Start parking Successfully Wrong Plate Number Device balance not enough Format SMS to start parking Spg car plate no time duration (minutes) HANDPHONE

STEP TO STOP PARKING Message sent Get the feedback to know the result Stop parking Successfully Sent the SMS to Format SMS to stop parking Spg car plate no stop HANDPHONE

Parking Start Successfully Vehicle Number:’TEST1234’ Duration=‘20’ : Minutes To Stop Parking Sent SPG (Vehicle Number) STOP For any info, call : STEP TO START PARKING Wait to get feedback Sent the SMS SMS RECEIVED SUCCESSFULLY TO START PARKING

Your Parking Stopped Successfully Vehicle Number:’TEST1234’ Duration=‘3’ : Minutes Closing Balance=‘83.42’ For any inquiry call : STEP TO STOP PARKING Wait to get feedback SUCCESSFULLY TO STOP PARKING Sent the SMS SMS RECEIVED

STEP TO START PARKING Wait to get feedback WRONG PLATE NUMBER/BALANCE EXPIRED TO START PARKING SMS RECEIVED Sent the SMS

STEP TO START PARKING Wait to get feedback BALANCE NOT ENOUGH TO START PARKING SMS RECEIVED Sent the SMS

spg auto park Spg operating manual

SMART PARKING GADGET Brand : SPG Model : C1 S&S IT INNOVATIONS TECHNOLOGY SDN BHD

CHARGING PORT DEVICE NAME POWER ON / OFF DISPLAY / TOUCH SCREEN FOR STAND INSERTION SLOT FOR SMARTCARD LED

HOW TO OPERATING SPG APP HOLD THE POWER BUTTON UNTIL SPG AUTOPARK LOGO BE DISPLAY THEN RELEASE THE POWER BUTTON 1 1

CAR REGISTRATION NUMBER AND CAR OWNER INFORMATION START BUTTON STOP BUTTON BALANCE CREDIT AVAILABLE HOW START SPG APP

ENSURE THE CAR IS PARKED PRESS THE “START” BUTTON LED (AT THE BACK) WILL START FLASHING TIMER WILL START TO RUN THE START DATE AND TIME WILL BE DISPLAYED PREVIOUS BALANCE WILL BE DISPLAYED Parking Duration: 00:00:08 Started: 05-May :10:28 HOW START SPG APP

FIX THE DEVICE TO THE HOLDER MAKE SURE THE LED ON THE DEVICE IS FACING OUTSIDE, VISIBLE TO THE ENFORCEMENT OFFICERS HOW PUT SPG DEVICE

Parking Duration: 00:00:08 Started: 05-May :10:28 Ended: 05-May :11: WHEN BACK TO CAR PRESS THE STOP BUTTON LED (AT THE BACK) WILL STOP FLASHING DURATION OF PARKING WILL BE DISPLAYED THE END DATE AND TIME WILL BE DISPLAYED NEW BALANCE WILL BE DISPLAYED HOW STOP SPG APP

1.PRESS THE STOP BUTTON FOR A LONG PERIOD (5 ~ 10 seconds) THE SCREEN HAS 3 OPTIONS a.“Power off” –touch this to switch off the device b.“Reboot” –touch this to reboot the device THE SCREEN HAS 3 OPTIONS a.“Power off” –touch this to switch off the device b.“Reboot” –touch this to reboot the device HOW TO RE-INITIALIZE

Important: The cover of this device is sealed. Do not try to open it, it may cause damage to the device For any assistance, refer to the Service Provider Contact Us: PERKHIDMATAN ALAM INDAH SDN. BHD. Phone: Fax: Contact Us: S&S IT INNOVATIONS TECHNOLOGY SDN. BHD. Phone: , Fax:

Thank You S&S IT INNOVATIONS TECHNOLOGY SDN BHD