Date of download: 5/29/2016 Copyright © ASME. All rights reserved. From: The Impact of Weld Metal Creep Strength on the Overall Creep Strength of 9% Cr Steel Weldments J. Eng. Mater. Technol. 2011;133(2): doi: / Schematic of the welding setup of four P911 pipe sections using three different filler metals differing in creep strength Figure Legend:

Date of download: 5/29/2016 Copyright © ASME. All rights reserved. From: The Impact of Weld Metal Creep Strength on the Overall Creep Strength of 9% Cr Steel Weldments J. Eng. Mater. Technol. 2011;133(2): doi: / Weld groove geometry (unit: mm) and applied welding sequence for all three butt welds Figure Legend:

Date of download: 5/29/2016 Copyright © ASME. All rights reserved. From: The Impact of Weld Metal Creep Strength on the Overall Creep Strength of 9% Cr Steel Weldments J. Eng. Mater. Technol. 2011;133(2): doi: / Schematic of the specimen location within the butt-welded joint (left) and parametric drawing of a creep specimen with ridges for integral strain measurement. Reference length L0 and diameters are adjusted according to the applied force and the desired stress level. Figure Legend:

Date of download: 5/29/2016 Copyright © ASME. All rights reserved. From: The Impact of Weld Metal Creep Strength on the Overall Creep Strength of 9% Cr Steel Weldments J. Eng. Mater. Technol. 2011;133(2): doi: / Inverse pole figure of an area close to the failed region in specimen M120. Clusters of black pixels indicate the locations of voids. Figure Legend: