Digital Systems: Number Systems and Codes Wen-Hung Liao, Ph.D.

Objectives Convert a number from one number system (decimal, binary, hexadecimal, gray code) to its equivalent in one of the other number systems. Cite the advantages of the hexadecimal number systems. Count in hexadecimal. Gray code Represent decimal numbers using the BCD code; cite the pros and cons of using BCD. Understand the difference between BCD and straight binary. Understand the purpose of alphanumeric codes such as the ASCII code. Explain the parity method for error detection. Determine the parity bit to be attached to a digital data string

Binary-to-Decimal Conversions Example 1: Example 2:

Decimal-to-Binary Conversions Method one: reverse the process of binary-to-decimal conversion. Method two: repeated division LSB: Least Significant Bit MSB: Most Significant Bit Example: =

Hexadecimal Number System The hexadecimal number system has a base of 16. Sixteen possible digits: 0,1,2,3,4,5,6,7,8,9,A,B,C,D,E,F Hex-to-decimal conversion Decimal-to-hex conversion Hex-to-binary conversion Binary-to-hex conversion

BCD Code Binary-Coded-Decimal versus straight binary coding. 0  0000, 1  0001, 2  0010, 3  0011, 4  0100, 5  0101, 6  0110, 7  0111, 8  1000, 9  (decimal)  (BCD) Nibble: half byte

Gray Code 3-bit gray code Hamming distance between consecutive codes=1 DecimalBinaryGray

Conversion Algorithms From binary to Gray: From Gray to binary: Note: A XOR B = A’B+AB’ Let B[n:0] be the input array of bits in the usual binary representation, [0] being LSB Let G[n:0] be the output array of bits in Gray code G[n] = B[n] for i = n-1 downto 0 G[i] = B[i+1] XOR B[i]XOR Let G[n:0] be the input array of bits in Gray code Let B[n:0] be the output array of bits in the usual binary representation B[n] = G[n] for i = n-1 downto 0 B[i] = B[i+1] XOR G[i]XOR

Alphanumeric Codes ASCII code: American Standard Code for Information Interchange The ASCII code is a 7 bit code, so it has 2^7=128 possible code groups. Refer to Table 2-4.

Parity Method for Error Detection Whenever information is transmitted from one device to another device, errors can occur due to noise. Parity method can be used to detect error. A parity bit is an extra bit that is attached to a code group that is being transferred. In even-parity method, the value of the parity bit is chosen so that the total # of 1s in the code group (including the parity bit) is an even number. In odd-parity method, the value of the parity bit is chosen so that the total # of 1s in the code group (including the parity bit) is an odd number.

Example ASCII ‘C’: Even-parity method: Odd-parity method: The parity bit is issued to detect any single-bit errors that occur during the transmission