ECLYPSE Demo &Time Saving Tools Good afternoon everyone. Thank you for coming, my name is…   During these 2 days you probably assisted to various presentations regarding our ECLYPSE controller : features, graphical design with Envysion and new functionnalites roadmap… The purpose of this session is to update you on the additional tools offered by Distech to save time and cost when using our products, and especially the ECLYPSE device. You will also see a live demo of how to quickly startup an ECLYPSE and use the associated tools.

Agenda Projects costs and evolution Tools for efficiency and productivity with Distech Controls’ products Tour of the tools ECLYPSE selection tool Getting started with ECLYPSE – Live Demo XPressgfxPoints Productivity Enhancing Tools – gfxApplications Tools live demo We will start with a few word about the global projects cost and see how tools can help improving your productivity. I will present the tools’ features, and will do a live demo of how to use them.

Project Cost Evolution and Distribution Installation €€€ Technical Labor Field Devices Since the last 35 years, we can notice that the repartition of the cost of a project has evolved, and Technical labor cost has exceeded the price of the physical devices themselves. DDC Products € 1980’s 2015

Typical Project Cost Proportion When looking at this gaph more in details, we see that the average cost of a project is around the same % for each phase, i.e…   So now we see where we really can save , don’t you think ? You could always ask a better price to your sales rep, which will represent a 10% portion of the whole project ! Or focus on optimizing where it really worth the price : technical labor

Typical Project Cost Proportion Let’s now look the typical repartition of the technical labor : say numbers

Time Saving Tools in Your Process Xpressgfx Points gfxApplications Xpressgfx Points That’s why Distech developed a set of nice “productivity tools”, which will make you save a lot of time at all the steps of the technical labor, and finally greatly reduce it’s cost. 1/ Xpress gfx to create the points list document share it with specifying engineers, and generate the corresponding I/Os in gfx program 2/ gfxApplications to have pre-made application templates for all kind of equipment 3/ Xpress gfx again to update the points list once the final program is done 4/ MyDC Control/Air balancing to remotely access all points of the program, fine tune PID loops, and do the VAV balancing 5/ Xpress gfx points again to complete the commissioning validation boxes Xpressgfx Points myDC Control myDC AirBalancing

Connected IP and Wi-Fi Product Series

Connected System Controller Power Supply 24VAC/VDC power supply module 100-240VAC power supply module available soon! Over-voltage and over-current output protection High-efficiency switch-mode circuitry Automation and Connectivity Server Control, automation and connectivity server, powered by Android OS Up to 20 ECY I/O extension modules - more models available soon! Wired IP and Wi-Fi connectivity (with Wi-Fi Adapter) Models with embedded ENVYSION IO Modules 8 UI and 6 UO (HOA) More models available soon! Colour-coded Terminal blocks Built-in protection against mis-wir­ing and faults Status LED

Fast and Powerful BACnet Building Controller (B-BC, BTL listed) Control, Automation and Connectivity Server, powered by Android OS Local logging, alarming, and scheduling functions Fast and powerful core and processor - ARM Cortex - A8 Core - Sitara - 1GHZ, 512 MB RAM - Flash Memory 4GB Web-based design and visualisation interface with embedded ENVYSION (optional) Web server application interface with REST API

Unique and Modular Design Expandable Inputs/Outputs - up to 320 inputs or 280 I/O Stacked dual row detachable terminal strips increases I/O density of the product Repeatable Power Supply module, with latest high-efficiency switch-mode circuitry HD15 interconnecting cable, to connect successive rows of modules within a controls cabinet providing power and communication Small footprint

Ease of Installation Plug & play devices, with HD15 connectors transmitting power and communications Hot-swappable design facilitates servicing without interrupting communication to other modules Auto addressing Hinged gull-wing cover to separate top assembly from the sub-base and protect IO terminal strips Built-in protection against miswiring and faults Colour-coded Terminal blocks Status LED to confirm input and output status Power supply over-voltage and over-current output protection, to protect the electronics

In the ECLYPSE Series Additional I/O modules: ECY-8UI6DO (14 point - 8 Universal Inputs, 6 universal Outputs) ECY-8UI6DO-HOA (with HOA switches) ECY-8UI6DOT (14 point - 8 Universal Inputs, 6 Digital TRIAC Outputs) ECY-8UI6DOT-HOA (with HOA switches) ECY-16DI (16 Digital Inputs) ECY-8DOR (8 Digital Form-C relay outputs) ECY-8DOR-HOA (with HOA switches) 100-240VAC power supply module for the ECLYPSE Connected System Controller

With Mobile apps – myDC Control Xpressgfx Points gfxapplications Embedded ENVYSION EC-NetAX EC-gfxProgram Code portability The ECLYPSE controller might be the one which will the most benefit from all these tools ! ECLYPSE Web Interface Welcome Page - Web Configuration Interface

Selection Tool The first step before starting engineering and programming your ECLYPSE controller will be to quote the proper hardware which will exactly fit the requirements of your project.   For that purpose, Distech created the ECLYPSE Selection Tool that you can DL from our website. After entering the number and types of physical points needed on the system, the selection tool will provide the corresponding component’s list (including DIN rail, cables…) This Excel worksheet is intended to calculate all components that constitute an ECLYPSE Connected System Controller Once you have won the project, you can re-use the worksheet to prepare your order.

Xpressgfx Points Features: Standard Add-on Points list template Automatically creates I/O configuration Imports EC-gfxProgram Files in your points list Benefits: No more data duplication Automatically synchronize last EC-gfxProgram file to create as-built points list All I/O configuration can be done by engineering Another useful tool ix Xpressgfx Points. Excel add-in, Downloadable for free on SmartInstaller Xpress gfx to create the points list document share it with specifying engineers, and generate the corresponding I/Os in gfx program It also works the other way round : after modifying I/Os in gfx, updates the EXCEL points list accordingly.

Xpressgfx Points Xpressgfx Points With Xpress gfx, all your I/O points configuration can be done at the engineering level instead of duplicating the information between the system engineer and the programmers. It will save time for both phasis.

Getting Started with ECLYPSE LIVE DEMO Once you have purchased the right material to your sales rep, the next step will be to setup the access mode and communication parameters to connect the ECLYPSE to the site’s network. During the demo we will see how to use the ECLYPSE’s config web interface

EC-gfxProgram A Common Programming Tool One interface to program all ECL, ECB and ECLYPSE controllers Re-use all your existing projects, codes and libraries As you know, ECLYSPE is using our common programming tool for ECL/ECB/ECY : ECgfxProgram.

gfxApplications gfxApplications is a leverage of our existing product called productivity enhancing tool. You can download them for free pour Productivity Enhancing Tools, which include gfxApplications. It consists into a large code library of complete applications for AHU, FCU, VAV, RTU, and 300 code snippets & custom blocks

gfxApplications Xpressgfx Points gfxApplications This will save time during the Programming phasis.   It is also a good way to train your new programmers to ECgfxProgram with practical pre-made examples.

Current: gfxApplications - VAV Pre-engineered Applications for VAV Available for all VAV types (single duct, series fan, parallel fan) Including VPACC (VAV Performance Assessment Control Charts) dcImages / dcgfxApplications Preloaded applications available from the dcgfxApplications palette in EC-NetAX to be able to easily create a station database

Coming soon: gfxApplications - VAV VAV Applications (Preloaded/Pre-Engineered) ECY-VAV Preloaded application ECY-VAV ENVYSION graphics Include ECM motor control & EC-Smart-Comfort/Air Pre-engineered program with light/blind expansion module dcImages / dcgfxApplications New graphics to adapt to ECY-VAV modified programs

Current: gfxApplications - PTU PTU Pre-engineered Applications Available for ECL/ECB-PTU controllers Versions for Ceiling Systems (Belimo 6 way valve eu.bac certified) Versions for Fan Coil Unit (eu.bac 24V and 230V thermal valves) Versions with light/blind expansion modules

Coming soon: gfxApplications - PTU PTU Pre-engineered Applications Upgrade of program to include EC-Smart-Comfort/Air Add modified APAR rules in standard program PTU Preloaded Applications Application for simple Fan Coil Unit program dcImages / dcgfxApplications dcgfxApplications palette modification to include these pre-engineered applications dcImages modifications to include Fan Coil Units and light/blind objects

Current: gfxApplications - AHU & RTU AHU Pre-engineered Applications Specifically designed for ECLYPSE Can be used with ECL/ECB controllers when using the Convert Project option Versions for 100% fresh air and mixing dampers 2 versions per type for European/US market. RTU Pre-engineered Applications Available for ECL/ECB-203 controllers Versions available for single zone or VAV system

Coming soon: gfxApplications - AHU & RTU AHU Pre-engineered Applications Add APAR rules in standard program Create new versions of programs based on required AHU types RTU Pre-engineered Applications Versions specifically designed for ECLYPSE Upgrade of program to include EC-Smart-Comfort/Air dcImages / dcgfxApplications dcgfxApplications palette modification to include these pre-engineered applications

AHU Applications 4 types of pre-engineered applications Video tutorials available – Coming soon Functional schematics for each application type

AHU Applications Video tutorials to help you understand the program structure

AHU Applications Functional schematics for each application type

Analytics in gfxApplications Pre-made Code Snippets for auto-evaluation of the equipment: VPAAC for VAVs APAR for AHUs Included in the Code library and fits in your applications! Development in progress : VPACC and APAR   Fault detection and diagnostic (FDD) methods that can detect common mechanical faults and control errors in air-handling units (AHUs) and variable-air-volume (VAV) boxes. AHU Performance Assessment Rules (APAR) is a diagnostic tool that uses a set of expert rules derived from mass and energy balances to detect faults in air-handling units. VAV box Performance Assessment Control Charts (VPACC) is a diagnostic tool that uses statistical quality control measures to detect faults or control problems in VAV boxes.

myDC Control Mobile App Features: Color-coded icons Same UI display All parameters can be overridden PID tuning ready Alarms manager Schedule manager Benefits: No training required No software needed No need for 2 technicians when commissioning The last tool of this presentation will save a lot of time during the commissioning phasis of the ECLYPSE and other controllers :   Used during startup&commissioning by accessing all pts of the device, override them to do the self validation, fine tune PID loops… from a mobile device ! and also maintenance of the site : modifying schedules

myDC Control Mobile App Xpressgfx Points gfxApplications myDC Control

Live Demo

Getting Started with ECLYPSE LIVE DEMO Time to demonstrate How to setup the ECLYPSE   Using standard Webbrowser to access HTML5 based interface.

Xpressgfx Points LIVE DEMO Create a new point list from scratch and export to gfx Import a pre-made program in EC-gfxProgram generate the point list Add a point in Excel and see the update in EC-gfxProgam Add a point in EC-gfxProgram and see the update in Excel Xpressgfx Points Is a new time saving tool that is added directly in your Microsoft Excel. Xpressgfx Points allow you to create your points list and export it directly in your EC-gfxProgram. That way, all your I/O points configuration can be done at the engineering level instead of duplicating the information between the system engineer and the programmers. A new EC-gfxProgram file is then created with wiresheets that includes all your points list information starting from the I/O point name up to all alarms parameters, data range, filter and I/O default values. All I/O entered in XpressGFX Points show with even refernce Hub or monitor tag depending on the resources entered. Another interesting feature is the Update function in the Xpressgfx Points. This functions allows you to update directly your points list or either your EC-gfxProgram I/O configuration by simply synchronize the two files together. A great example of the use of this function is when you’re making your as built documentation. All the usual data duplicating is now past…Simply synchronize your points list with the last version of your EC-gfxProgram of your project. We will show you later in this presentation a live demo of the Xpressgfx Points and its cool features!

gfxApplications LIVE DEMO AHU Applications with EC-gfxProgram Updated versions of other ECL/ECB programs EC-Smart-Vue pre-configured blocks for SO and SOF type of sensors. Enriched custom blocks library Reduce engineering time by using pre- engineered programs.

Thank You! Questions?