Autumn, 2012C.-S. Shieh, EC, KUAS, Taiwan1 智慧電子應用設計導論 (1/3) Arduino Development Environment Chin-Shiuh Shieh ( 謝欽旭 ) Department of Electronic Engineering National Kaohsiung University of Applied Sciences, Taiwan

Autumn, 2012C.-S. Shieh, EC, KUAS, Taiwan2 Installing Arduino Software Download arduino windows.zip from Unzip arduino windows.zip into C:\Program Files\arduino arduino.exe is the main program

Autumn, 2012C.-S. Shieh, EC, KUAS, Taiwan3

Autumn, 2012C.-S. Shieh, EC, KUAS, Taiwan4

Autumn, 2012C.-S. Shieh, EC, KUAS, Taiwan5

Autumn, 2012C.-S. Shieh, EC, KUAS, Taiwan6

Autumn, 2012C.-S. Shieh, EC, KUAS, Taiwan7 Installing USB-to-RS232 Driver Plug in Arduino MEGA 2560 Manually install the drive from “C:\Program Files\arduino-1.0.1\drivers” Check assign COM port from 控制台  系 統  硬體  裝置管理員  連接埠 (COM 和 LPT)

Autumn, 2012C.-S. Shieh, EC, KUAS, Taiwan8

Autumn, 2012C.-S. Shieh, EC, KUAS, Taiwan9

Autumn, 2012C.-S. Shieh, EC, KUAS, Taiwan10

Autumn, 2012C.-S. Shieh, EC, KUAS, Taiwan11 Configure Board and COM Port Create program shortcut if you like. Select Tools  Board  Arduino Mega 2560 Select Tools  Serial Port  assigned COM port

Autumn, 2012C.-S. Shieh, EC, KUAS, Taiwan12

Autumn, 2012C.-S. Shieh, EC, KUAS, Taiwan13

Autumn, 2012C.-S. Shieh, EC, KUAS, Taiwan14

Autumn, 2012C.-S. Shieh, EC, KUAS, Taiwan15 User Interface Verify sketch (program) Verify and upload sketch Serial 0 monitor Close Open

Autumn, 2012C.-S. Shieh, EC, KUAS, Taiwan16 Sample Program – Hello, Arduino! void setup() { Serial.begin(9600); } void loop() { Serial.println("Hello, Arduino!"); delay(500); }

Autumn, 2012C.-S. Shieh, EC, KUAS, Taiwan17

Autumn, 2012C.-S. Shieh, EC, KUAS, Taiwan18

Autumn, 2012C.-S. Shieh, EC, KUAS, Taiwan19

Autumn, 2012C.-S. Shieh, EC, KUAS, Taiwan20 Sample Program – Flash LED int LED = 13; void setup() { pinMode(LED,OUTPUT); } void loop() { digitalWrite(LED,HIGH); delay(500); digitalWrite(LED,LOW); delay(500); }

Autumn, 2012C.-S. Shieh, EC, KUAS, Taiwan21