Progress on Bi-doped fibers Dong-Yo Jheng 2012/06/07.

Slides:



Advertisements
Similar presentations
Simultaneously Stokes and anti-Stokes Raman amplification in silica fiber Victor G. Bespalov Russian Research Center "S. I. Vavilov State Optical Institute"
Advertisements

The LaRC Fiber Draw Tower Presented by Stan DeHaven.
Dr. Mike Nofziger 2010 “LASERS” Light Amplification by the Stimulated Emission of Radiation.
S Digital Communication Systems Fiber-optic Communications - Supplementary.
EE 230: Optical Fiber Communication Lecture 5 From the movie Warriors of the Net Attenuation in Optical Fibers.
Combined Stokes-anti-Stokes Raman amplification in fiber Victor G. Bespalov All Russian Research Center "S. I. Vavilov State Optical Institute" Nikolai.
Building a Continuous Wave Erbium Doped Fiber Laser and Amplifier Ben Baker Kristen Norton.
May Chuck DiMarzio, Northeastern University ECE-1466 Modern Optics Course Notes Part 9 Prof. Charles A. DiMarzio Northeastern University.
Optical Fibre Communication Systems
Lecture: 10 New Trends in Optical Networks
1 Optical Fibre Amplifiers. 2 Introduction to Optical Amplifiers Raman Fibre Amplifier Brillouin Fibre Amplifier Doped Fibre Amplifier.
Dye lasers The gain medium in a dye lasers is a solution made with an organic dye molecule. The solution is intensely coloured owing to the very strong.
EE 230: Optical Fiber Communication From the movie Warriors of the Net Lecture 8 Fiber Amplifiers.
Single photon sources. Attenuated laser = Coherent state Laser Attenuator Approximate single photon source Mean number of photon per pulse.
May be regarded as a form of electromagnetic radiation, consisting of interdependent, mutually perpendicular transverse oscillations of an electric and.
9. Semiconductors Optics Absorption and gain in semiconductors Principle of semiconductor lasers (diode lasers) Low dimensional materials: Quantum wells,
Jacob B Khurgin Johns Hopkins University, Baltimore Greg Sun
E D F A Seminar By: Geno G James EE-566 Optical Communication.
Optical Amplifiers An Important Element of WDM Systems Xavier Fernando ADROIT Group Ryerson University.
Introduction to Fibre Optic Communication Mid Sweden University.
Engr. Hyder Bux Mangrio Engr. Fayaz Hassan Mangrio
Optical Fiber Communications Week-3 1Bahria University.
Quartz fibers for ECAL calibration system. The existing LED system: fibers to be replaced to more rad hard ones (quartz). Total of ~ 40 km to be purchased.
1 Bi-doped Fiber Lasers: Opportunities and Challenges E. M. Dianov Fiber Optics Research Center of the Russian Academy of Sciences, 38 Vavilov str., Moscow.
1 Introduction to Optical Electronics Quantum (Photon) Optics (Ch 12) Resonators (Ch 10) Electromagnetic Optics (Ch 5) Wave Optics (Ch 2 & 3) Ray Optics.
The Chinese University of Hong Kong 1 Two key questions raised by Prof Kao 1. Is 1. Is Ruby laser a suitable source for optical communication? 2. What.
Service d’Électromagnétisme et de Télécommunications 1 1 Attenuation in optical fibres 5 ème Electricité - Télécommunications II Marc Wuilpart Réseaux.
Fiber Optics Communications Lecture 11. Signal Degradation In Optical Fibers We will look at Loss and attenuation mechanism Distortion of optical signals.
Formatvorlage des Untertitelmasters durch Klicken bearbeiten 1/26/15 1 kHz, multi-mJ Yb:KYW bulk regenerative amplifier 1 Ultrafast Optics and X-Ray Division,
KM3NeTmeeting Pylos, Greece, April of 12 Mar van der Hoek et al. electronic department PROGRESS ON OPTICAL MODULATORS FOR KM3NeT Mar van der.
FIBER PROPERTIES Transmission characteristics of a fiber depends on two important phenomena Attenuation Dispersion Attenuation or transmission loss Much.
Overview of course Capabilities of photonic crystals Applications MW 3:10 - 4:25 PMFeatheringill 300 Professor Sharon Weiss.
PbSe Nanocrystals (NCs) -from synthesis to applications- by Razvan-Ionut Stoian Oklahoma State University, Department of Physics Motivation General properties.
The authors gratefully acknowledge the financial support of the EPSRC High slope efficiency liquid crystal lasers designed through material parameter optimisation.
Carbon Nanotube Formation Detection of Ni atom and C 2 Gary DeBoer LeTourneau University Longview, TX NASA Johnson Space Center Thermal Branch Structures.
Yb:CaF 2 Diode-Pumped Regenerative Amplifier: Study and Optimization of Pulse Duration Versus Repetition Rate ICUIL, Watkins Glen, 26 th September-1 st.
Optical Sources. History of Lasers In 1917, Einstein predicted the existence of spontaneous and stimulated emission by which an atom can emit radiation.
Kinetic Investigation of Collision Induced Excitation Transfer in Kr*(4p 5 5p 1 ) + Kr and Kr*(4p 5 5p 1 ) + He Mixtures Md. Humayun Kabir and Michael.
An Approach to Flatten the Gain of Fiber Raman Amplifiers with Multi- Pumping By: Dr. Surinder Singh Associate Professor Electronics & Communication Engg.
MW 3:10 - 4:25 PMFeatheringill 300 Professor Sharon Weiss Timeline of Important Events Related to the Development of the Photonic Crystal Research Area.
Radiation Tolerant Optical Fibres for LHC Beam Instrumentation Radiation Effects T. Wijnands †, L.K. De Jonge †, J. Kuhnhenn ‡, S. K. Hoeffgen ‡, U. Weinand.
Refractive Index Enhancement without Absorption N. A. Proite, J. P. Sheehan, J. T. Green, D. E. Sikes, B. E. Unks, and D. D. Yavuz University of Wisconsin,
Min Hyeong KIM High-Speed Circuits and Systems Laboratory E.E. Engineering at YONSEI UNIVERITY
A Thermospheric Lidar for He 1083 nm, Density and Doppler Measurements
Optical Amplifiers By: Ryan Galloway.
Quenching of Fluorescence and Broadband Emission in Yb 3+ :Y 2 O 3 and Yb 3+ :Lu 2 O 3 3rd Laser Ceramics Symposium : International Symposium on Transparent.
Nanoscale Cr 4+ Doped Olivine Crystallites Used In Optical Amplifiers and Lasers Presentation by: Victor Ortiz Mentor: Dr. Alexei Bykov Mentor: Dr. Alexei.
Highly efficient Raman fiber laser Collaborators: E. Bélanger M. Bernier B. Déry D. Faucher Réal Vallée.
Optical sources Types of optical sources
Transmission Characteristic of Optical Fibers
광섬유 센서를 이용한 변형 측정 김대현 Department of Aerospace Engineering Smart Structures and Composites Laboratory Optical Fiber Jacket (  = 300.
The solid-state laser - A 50 year old light bulb
The dye is a large molecule with a large number of closely spaced vibrational states – essentially a continuum of states. The pump pulse populates the.
“LASERS” Light Amplification by the Stimulated Emission of Radiation.
High Power Cladding-pumped Fiber Laser Speaker: Shiuan-Li Lin Advisor : Sheng-Lung Huang Solid-State Laser Crystal and Device Laboratory.
Overview of First Presentation Laser Types of Laser Quantum DL Basic Components of QDL Types of QDL Theory of QDL Application.
Erbium-doped fiber amplifiers Joonas Leppänen Emma Kiljo Jussi Taskinen Niklas Heikkilä Alexander Permogorov Group 3 EDFA Photonics.
1 Room temperature slow light with 27 GHz bandwidth in semiconductor quantum dots Giovanni Piredda, Aaron Schweinsberg, and Robert W. Boyd The Institute.
Advisor: Sheng-Lung Huang Speaker: Sheng-Feng Chen 1.
Four wave mixing in submicron waveguides
by: Mrs. Aboli N. Moharil Assistant Professor, EXTC dept.
Single and dual wavelength Er:Yb double clad fiber lasers
Fiber lasers for GW detectors
Outline Er:YAG double-clad crystal fiber
Temperature control of crystals
Introduction to Optoelectronics Optical Communication(1)
L. Di Labio, W. Lüthy, V. Romano, T. Feurer Transitions and mechanisms
E. Kheirandish1, N. Yavarishad1, D. Guan2, C. Yuan3, N. Kouklin1
Atomic transitions and electromagnetic waves
PROF. KAPARE A.K. SUBMITTED BY- DEPARTMENT OF PHYSICS
Presentation transcript:

Progress on Bi-doped fibers Dong-Yo Jheng 2012/06/07

First Paper of IR Emission in Bi-doped Glasses SiO Al 2 O Bi 2 O 3 Ref [1]

Progress of Bismuth-doped Glass Fibers YearProgressGroupRef. 2001IR emission in Bi-doped silica glassOsaka Univ.[1] 2003Optical gain in Bi-doped silicaOsaka Univ.[2] 2005Bi-doped silica fiberSumitomo Elec.[3] Bi-doped silica fiberRAS[4] Bi-doped fiber laserRAS[5] 1150 ~ 1215 nmRAS[6] Mode-locked BDFLRAS[7] 1300 ~ 1470 nmRAS[8] 1470 ~ 1550 nmRAS[9] 2011Bi-doped fiber 1430 bandRAS[10] 3 RAS: Russian academy of sciences

Bismuth Element 4 Element categoryPost-transition metal Atomic weight Electron configuration[Xe] 4f 14 5d 10 6s 2 6p 3 Density9.78 g·cm −3 Melting point271.5 °C

Active Center for IR Emission  The nature of Bi-related IR-emitting centers is still unclear.  Bismuth products in glass synthesis: -Polyvalent ions: Bi 5+, Bi 3+, Bi 2+, Bi + -Clusters: Bi 2, Bi 2 -, Bi 3 -Colloids: (Bi) n  IR emission has been attributed to: -Bi 5+ - Fujimoto and Nakatsuka, Bi + - X. Meng et al., BiO - J. Ren et al., Bi 2, Bi 2 -, Bi Khonthon et al., 2007; Sokolov et al., Point defects in glass - Sharonov et al., 2008; Lakshminarayana et al., Ref [11]

Glass Compositions in Literatures 6 Ref [11]

Luminescence Intensity of Different Glasses 7 SiO 2 P 2 O 5 -SiO 2 GeO 2 Al 2 O 3 -SiO 2 Ref [12]

Emission Peak of Different Glasses 8 Ref [12]

Bismuth-doped Fibers  Fabricated with MCVD technique  Index guiding achieved by either method -Increase core index by dopants -Clad with F-doped silica  Loss level varies with compositions 9 Ref [12]

Diode-pumped BDFA at 1430 band  Material: GSB (Bismuth-doped germanosilicate)  L: 125 meters  34-dB net gain at 1427 nm under 180-mW pump  24-dB net gain with diode pumping nm diode pump 1320-nm Raman fiber laser pump P pump = 65 mW Ref [10]

BDFL at 1389 nm ~ 1538 nm 11 Non-PM fiber λ s = 1460 nm η s ~ 60% PM fiber λ s = 1460 η s = 41% PER>15dB Material: GSB L = 95 m λ p = 1340 nm Ref [13]

Conclusion  Bi-doped fiber -Laser emission demonstrated in the range of 1150~1550 nm with different core compositions and pump wavelengths. -Efficient laser and optical amplification demonstrated around 1430 nm for GSB fiber pump at 1310 nm.  Challenges -Complicated nature of active centers, unclear emission mechanism 12

References 1Y. Fujimoto, and M. Nakatsuka, "Infrared luminescence from bismuth-doped silica glass," Jpn. J. Appl. Phys. 40, 279 (2001). 2 Y. Fujimoto, and M. Nakatsuka, "Optical amplification in bismuth-doped silica glass," Appl. Phys. Lett. 82, 3325 (2003). 3T. Haruna, M. Kakui, T. Taru, S. Ishikawa, and M. Onishi, "Silica-Based Bismuth-Doped Fiber for Ultra Broad Band Light Source and Optical Amplification around at 1.1 μm," in Optical Amplifiers and Their Applications, Technical Digest (CD), (Optical Society of America, 2005), paper MC3. 4V. V. Dvoyrin, V. M. Mashinsky, E. M. Dianov, A. A. Umnikov, M. V. Yashkov, and A. N. Guryanov, "Absorption, fluorescence and optical amplification in MCVD bismuth-doped silica glass optical fibres," in European Conference on Optical Communications(Institution of Electrical Engineers, Glasgow, Scotland, 2005), pp E. M. Dianov, V. V. Dvoyrin, V. M. Mashinsky, A. A. Umnikov, M. V. Yashkov, and A. N. Gur'yanov, "CW bismuth fibre laser," Quantum Electron. 35, (2005). 6E. M. Dianov, A. V. Shubin, M. A. Melkumov, O. I. Medvedkov, and I. A. Bufetov, "High-power cw bismuth-fiber lasers," J. Opt. Soc. Am. B 24, (2007). 7E. M. Dianov, A. A. Krylov, V. V. Dvoyrin, V. M. Mashinsky, P. G. Kryukov, O. G. Okhotnikov, and M. Guina, "Mode-locked Bi-doped fiber laser," J. Opt. Soc. Am. B 24, (2007). 13

References (cont’d) 14 8I. A. Bufetov, S. V. Firstov, V. F. Khopin, O. I. Medvedkov, A. N. Guryanov, and E. M. Dianov, "Bi- doped fiber lasers and amplifiers for a spectral region of 1300–1470 nm," Opt. Lett. 33, (2008). 9E. M. Dianov, S. V. Firstov, V. F. Khopin, O. I. Medvedkov, A. N. Gur'yanov, and I. A. Bufetov, "Bi- doped fibre lasers operating in the range 1470–1550 nm," Quantum Electron. 39, 299 (2009). 10M. A. Melkumov, I. A. Bufetov, A. V. Shubin, S. V. Firstov, V. F. Khopin, A. N. Guryanov, and E. M. Dianov, "Laser diode pumped bismuth-doped optical fiber amplifier for 1430 nm band," Opt. Lett. 36, (2011). 11 I. A. Bufetov, and E. M. Dianov, "Bi ‐ doped fiber lasers," Laser Phys. Lett. 6, (2009). 12E. M. Dianov, "Bismuth-doped optical fibers: a challenging active medium for near-IR lasers and optical amplifiers," Light Sci. Appl. 1, e12 (2012). 13A. Shubin, I. Bufetov, M. Melkumov, S. Firstov, O. Medvedkov, V. Khopin, A. Guryanov, and E. Dianov, "Bismuth-doped silica-based fiber lasers operating between 1389 and 1538 nm with output power of up to 22W,“ Opt. Lett. (to be published).