1 Copyright Chinese Taipei 2012 Bureau of Energy, The Ministry of Economic Affairs Chinese Taipei Economy Update- Chinese Taipei APEC EGEE&C meeting, Sydney Australia Economy Update- Chinese Taipei APEC EGEE&C meeting, Sydney Australia 27~28 February, 2012

2 Copyright Chinese Taipei 2012 Energy Efficiency Update in Chinese Taipei Energy Efficiency Compliance Program Closing Remark Content

3 Copyright Chinese Taipei 2012 Energy Efficiency Update in Chinese Taipei

4 Copyright Chinese Taipei Source ： IEA/OECD, key world energy statistics, unit ： toe/million dollars GDP(PPP) Source ： Chinese Taipei Energy Statistics Fig (4) Energy Intensity and Productivity (2010) Fig (5) Energy Intensity Comparison (2008) 3. Energy Efficiency Energy intensity has decreased by 1.9% annually since Comparing with developed countries, there is still room for energy efficiency improvement. 2016/6/11 1.9%

5 Copyright Chinese Taipei Benchmarks for Energy Label Products(34 product Categories) 4931 Energy Conservation Labeling certified models with 315 brand names on Feb. 21, 2012 YearCategories 2001(1)air-conditioners (2) refrigerators (3) dehumidifiers (4) clothes dryers 2002(5)TVs (6) clothes washers (7) electric (8) fans, fluorescent lamps (> 32 W) 2003 (8)fluorescent lamps ( ＜ 32W) (9)hair dryers (10) hand dryers 2004(11)warm-hot water dispensers (12) chilled-warm-hot water dispensers 2005(13) chilled-warm-hot drinking fountains (14) automobiles & light trucks (15) motorcycles (16) self-ballasted fluorescent lamps 2006(17) thin film transistor-liquid crystal display (18) instant gas burning water heaters (19) gas burning cooking appliances (20) electric rice cookers 2007(21)Electric Storage Water Heaters (effective on Jan. 1, 2008)(22) Electric Pots (23) Exit Lights and Emergency Direction Lights(24) DVD Products 2008(25)Warm-hot drinking fountains (26) Luminaries (27) Integrated Stereo 2009(28)Compact Fluorescent Lamp 2010(29)Printer 2011(30) Copier (31) Air Cleaner (new) 2012 （ 32 ） street lighting (33)Ventilating Fan for Bath Room (34) Window Type Ventilating Fan The Voluntary Energy Labeling Program

6 Copyright Chinese Taipei 2012 Energy Efficiency Grading program – Mandatory Labels  To show the consumers useful information as they choose among various models.  To influence consumers’ purchasing decisions to lead the product importers or manufacturers will likely take actions to improve energy efficiency of their products and to phase out low energy-efficient ones.  The mandatory labeling of air conditioner, refrigerator, automobile and motorcycle had entered into force on July 1, 2010,and that of dehumidifier and compact fluorescence lamp on March 1, 2011 and July 1, The program will extend to Gas Stove and Instantaneous Gas Water Heater.  Currently, there are 5,035 air conditioner models, 783 refrigerator models. 1,700 automobile models and 420 motorcycle models,180 dehumidifier models and 1309 CFL models have completed mandatory energy label applications. The Mandatory Labeling Program air conditioner automobile

7 Copyright Chinese Taipei 2012 Energy Efficiency Labeling Criteria and Test Method for Qualified LED Street Lights The equipment for determining the product’s luminous efficacy is the photometer. The test conditions and method for determining the product’s luminous efficacy shall meet the requirements of CIE 70 Standard. The test angle during light distribution curve measurement shall not be greater than 2.5 degree. The measured luminous efficacy for the product shall be calculated as the total light output from the light fixture (lm) divided by the total input power (W) of the light fixture. Lamp classificationrequirements Lamp rating Color temperature. classification Initial luminous Efficacy (lm/W) Lumen maintenance (3000 小時 ) others Full power high ≧ 85.0 Not lower than 95.0% Power factor ≧ 0.90 Dustproof & waterproof ： IP65and IP66 Uniformity ≧ 0.33 Mid ≧ 75.0 Low ≧ 75.0 ◎ The Test Method ：

8 Copyright Chinese Taipei 2012 Energy Efficiency Labeling Criteria and Test Method for Qualified gas discharge type Street Lights Lamp classificationrequirements Lamp rating Color temperature. classification Initial luminous Efficacy (lm/W) Lumen maintenance (3000 小時 ) others Full power CCT ≧ 5000K ≧ 75.0 Not lower than 85.0% Power factor ≧ 0.90 Dustproof & waterproof ： IP65and IP66 Uniformity ≧ 0.33 CCT <5000K CCT ≧ 3500K ≧ 75.0 CCT< 3500K ≧ 85.0 Note ： 1.Lamp rating = power rating of light bulb + power rating of starter. 2.The initial luminous efficacy is the luminous efficacy value measured after the product has gone through 100 hours of aging. 3.The determination of lumen maintenance shall be conducted after 3000 hours of continuous lighting (not including the 100 hours of initial aging) through measurement of light flux using the light distribution curve measurement equipment. 4: Illumination uniformity = Minimum illumination / average illumination

9 Copyright Chinese Taipei 2012 The EE Test method and standards Ventilating Fan for Bath Room and Window Type ◎ Energy consumption test conditions and method 1.The energy efficiency test conditions and test method of the product shall meet the requirements of ISO 5801 and AMCA Test voltage: During the test, the applied voltage shall be within 110 V±2% or 220 V±1%. 3.The product’s test sample shall have airtight connection with the entrance of the standard air duct, and be under the rated test voltage and frequency. When the product is operated at maximum speed and under the reference static pressure of 2.5 mmAq (0.1 in Wg), the air volume (m3/hr, CMH) as well as the corresponding power consumption (W), power factor, ambient dry and wet bulb temperature ( ℃ ) and atmospheric pressure (kPa) shall be measured. 4.The measurement of air flow for the product shall be conducted in accordance with the requirements of the ISO 5801 and AMCA 210. The measured air volume shall then be converted to nominal air volume under the standard state of 1 atm and 20 ℃. 5.The energy efficiency value of the product shall be calculated as follows: Measured air efficiency value = Nominal air volume (m3/hr) / electric power consumption (W) ◎ Energy Efficiency Criteria for Bath Room The energy efficiency value of the product shall be no less than 7.00 m3/hr/W. ◎ Energy Efficiency Criteria for Window Type The energy efficiency value of the product shall be no less than 0.5 m3/min/W.

10 Copyright Chinese Taipei 2012 Incandescent Lamp MEPS enters into force Minimum Energy Performance Standards Nominal power （ W ） Luminous Efficacy (lm/W) 25 ≦ P ＜ ≦ P ＜ ≦ P ＜ P ≧ The following standards have been entered into force on Jan. 1, 2012 These standards are very stringent. Almost all the incandescent bulbs will be removed from the market.

11 Copyright Chinese Taipei 2012 Energy Efficiency Compliance Program

12 Copyright Chinese Taipei While conducting inspection of the energy efficiency rating labeling, the Central Competent Authority may conduct annual product sampling and testing; the Central Competent Authority may designate the sampled products and the dealer shall send the product samples to designated testing laboratory within the allowed time. The energy factor obtained through such testing shall be greater than 95% of the labeled value; if not, the Central Competent Authority shall inform the dealer to conduct re- testing. The number of re-tested samples of the product with same product number shall double the number of the first-tested samples, and the dealers shall pay for all costs associated with the re-testing. If the product re-testing has not been conducted, or not all tested model comply with the stipulated Energy Efficiency Ratio requirements, the Central Competent Authority shall inform the non-complying dealer to conduct corrective actions based on Article 21 of the Energy Management Act within designated period and shall take all relevant follow-up actions against the involved dealer 10. In principle, the number of products first sampled and tested shall be decided based on the sales number of the designated model number of the previous year, and one (1) sample shall be tested out of five thousand (5,000) units of such product model sold. If less than 5000 units were sold for that model number in the prior year, one (1) sample shall be tested. Nonetheless, the Central Competent Authority may change the sampling ratio based on actual needs. guidelines of the by law of the compliance program Mandatory Labeling Program 7 out of 56 refrigerator check tests failed in models AC check tests have just been finished in 2011.

13 Copyright Chinese Taipei 2012 The on site audit of EE label Display  Total labeling rate No. of products on show room ： 3,641 Products without label display ： 397 Label rate ： 89.1%  Labeling rate of different products  Large and small shop labeling rate  Total labeling rate No. of products on show room ： 3,641 Products without label display ： 397 Label rate ： 89.1%  Labeling rate of different products  Large and small shop labeling rate On site audit results ( AC 、 refrigerator 、 Dehumidifier) source ： ITRI, 2011

14 Copyright Chinese Taipei 2012 The check test for Voluntary label program 10 kinds of products, 3 companies per kind of product, and at least 1 product each company. Rice cooker, CFL, Fluoecence Lamp, electric storage water heater, Indoor lighting device, water fountain, electric water pot, electric water dispenser, electric fan Number of failure Rice cooker (1/3), CFL (5/5), Fluoescence Lamp(3/10), electric storage water heater (3/3), Indoor lighting device (2/5), water fountain (0/3), electric water pot (1/3), electric water dispenser (0/3), electric Fan (0/3) The check test will be expanded to 20 kinks of products for voluntary programs in 2012.

15 Copyright Chinese Taipei 2012 Problems needed to solved Large amount of products without label display which should be remove from the market, since they were distributed around the region but it is hard to enforce this by-law. Since the test sample is based on the total sales of previous year, therefore, it is hard to pick up the test samples of certain models, during the check test period? The importers and manufactures always challenge the test deviation between different labs.

16 Copyright Chinese Taipei 2012 The street lighting and Ventilation fans for bath room and window have been put into the voluntary EE program in Chinese Taiepi. The MEPS of incandescent lamp has been entered into force in Chinese Taipei on Jan. 1 this year. This will ban this lamp indirectly. The on site EE label audit found out the labeling rate is not good in small appliance shop. The E.E. labeling compliance program in Chinese Taipei is in the start up stage and still need more work to enhance its legal system. Concluding Remarks

17 Copyright Chinese Taipei 2012 Thank you for your attention