JACK MILL

JS-24CNC-3N+ANCA is commendate to use on fluting & relief process for diameter from ψ0.2mm to 6 mm with shank diameter fromψ2mm~ψ6mm for extra hard material like carbide & HSS 。 JS-24CNC-3N+ANCA features ： High Speed integrated CNC loading & unloading robot ram system. Systematic module to step up work piece round out. High accuracy V-block & friendly software for easy set-up. High quality M/C assemble for high accuracy. Swiss made hydraulic cylinder & guide way for 24 hours operation. ANCA motion controller with servo motor for highly grinding accuracy. Three axis simultaneously working & automatic loading & unloading system. Three axis simultaneously working to make sure workpiece grinding with highly repeated Accuracy. Besides, M/C can make fluting & relief process by just one chucking. B Axis This process is for the purpose for rotating workpiece and to combine with Z axis traverse simultaneously, the helix angle can be grinded with resolution Z Axis This process is for the controlled workpiece grinding length with resolution X Axis This axis is for controlled the flute depth, taper for workpiece with resolution 0.001mm

Systematically Servo Controlled Robot Arm Automatically loading & uploading robot arm system to save laborpower & ensure protect ball-nose & flute edge while loading & uploading. Maximum capacity for cassette can be up to 500 piece to ensure efficiency production line X1 Axis This function is controlling cassette traverse right & left. Y1 Axis This function is controlling robot arm traverse up & down. Two axes simultaneously traverse that workpiece can be loading & uploading automatically. Grinding System ： JS-24CNC-3N ANCA is designed for fluting, relieving, fishtail and eccentric relieving for mirco cutting tool, router bit & drill. Hydraulic wheelhead traverse up & down ： M/C can have workpiece grinded right & left flute with one clamping.

手輪式尺寸補 正系統 JS-24CNC-3M ANCA control system Friendly interface to set up chosen type interface, customer can choose function such as fluting & relieving directly on operation screen. ● English dialogue type interface to ensure customer can operate easily ● Applying ANCA motion CNC PC-based controller. ● Auto-protection system to prevent operator enter wrong number. Handed wheel Compensation system Simple interface & applying ANCA controller can satisfy various demand from customer. Changeable wheel speed & inverter Customer can adjust wheel speed on inverter to set up suitable surface brightness.

5 ANCA MOTION CNC controller Five axis servo motor controlled ( 3 axis + 2 axis simultaneously) Touch Panel PC. Hand wheel parameter compensation High accuracy V block+carbide steady rest. Schaublin W12 collet+ Collet carbide protection. SCHNEEBERGER guideway Germany made. ATEC-CYL Hydraulic cylinder Swiss made. Shank for auto loading Shank Φ2mm~6.35mm Workpiece length ： 80mm Grinding length ： 40mm

Features of JS-24CNC-3N ANCA 1.Strong stiffness of Table Structure which using Spheroidal graphite iron casting with several Thermal Annealing System & Internal Force releasing process, which we believe can bring work piece a very stable size under 24 hours non-stop grinding environment. 2.Internal Controlled Hydraulic Automatic Robot Arm Loading & Unloading System, to save cost & risk on adding another air-pressure controller. Swiss made cylinder which can resist micro carbide power from permeating into key components while M/C operated under dirty, misty & oily working environment to extend life span of component. 3.Hydraulic Steady Rest Designed to reduce the side force caused while grinding wheel approached which can make sure Round-Out & Concentricity under best condition. 4.Hydraulic V-block supporter to correct the Round-Out caused by collet while work piece rotating under grinding condition. 5.Applying ANCA motion CNC controller, the stability of M/C & capacity can be 2 times more than traditional PLC.

JS -24CNC-3N +ANCA 控制器 規格 機型 JS -24CNC -3N Z axis traverse distance (Z-AXIS) M.M.75 Z axis traverse & grinding speed MM/MIN1 ~ 75 Maximum traverse speed MM/MIN140 Resolution MM0.001 X axis traverse distance (X-AXIS) MM60 X axis traverse & grinding speed MM/MIN0.01 ~ 5 Maximum traverse speed MM/MIN140 Resolution MM0.001 B axis rotation degree (B-AXIS) DEG. 360 ° Rotation & grinding speed. RPM/MIN60 Index = DEG. N/REV360,000 Maximum wheel head speed. RPM/MIN5500 Wheel specification MM φ 80 ~ φ 150 Wheel sets PCS2 Loading speed (X1 & Y1-AXIS) M/MIN200 Shank Range MM φ 3.175~6mm Robot Arm Traverse Distance MM20 ~ 75 Wheel Head Motor. K.W.1.5 Z axis servo motor (Z-AXIS) K.W./CM20.48 X axis servo motor (X-AXIS) K.W./CM21.20 Workhead servo motor (B-AXIS) K.W./CM20.64 X1 cassette servo motor (X1-AXIS) K.W./CM20.48 Y1 robot arm servo motor (Y1-AXIS) K.W./CM20.48 Pump motor K.W.0.75 Coolant system pump motor K.W.0.2 Length x Width x Hight MM 2000 x 1500 x 1800 KGS1800