Date of download: 6/1/2016 Copyright © ASME. All rights reserved. From: High Temperature Direct Methanol Fuel Cell Based on Phosphoric Acid PBI Membrane J. Fuel Cell Sci. Technol. 2011;8(6): doi: / HT-DMFC operating at temperatures of 120, 150, and 175 °C with oxygen and air with loadings of 1/0.5 mg · cm−2 Pt-Ru/Pt for anode/cathode, respectively (2% vol methanol) Figure Legend:

Date of download: 6/1/2016 Copyright © ASME. All rights reserved. From: High Temperature Direct Methanol Fuel Cell Based on Phosphoric Acid PBI Membrane J. Fuel Cell Sci. Technol. 2011;8(6): doi: / HT-DMFC operating at temperatures of 120, 150, and 175 °C with oxygen and air with loadings of 1/0.5 mg · cm−2 Pt-Ru/Pt for anode/cathode (4% vol methanol) Figure Legend:

Date of download: 6/1/2016 Copyright © ASME. All rights reserved. From: High Temperature Direct Methanol Fuel Cell Based on Phosphoric Acid PBI Membrane J. Fuel Cell Sci. Technol. 2011;8(6): doi: / Anode performance for methanol oxidation operating at temperatures of 120, 150, and 175 °C using 2% vol MeOH and a loading of 1 mg · cm−2 Pt-Ru for anode Figure Legend:

Date of download: 6/1/2016 Copyright © ASME. All rights reserved. From: High Temperature Direct Methanol Fuel Cell Based on Phosphoric Acid PBI Membrane J. Fuel Cell Sci. Technol. 2011;8(6): doi: / Methanol oxidation at a temperature of 20 °C using 0.5 M sulfuric and 0.5 M phosphoric acids, the catalyst loading was 0.02 mg cm−2 Pt-Ru (1.0 M methanol and Nafion as a binder) Figure Legend:

Date of download: 6/1/2016 Copyright © ASME. All rights reserved. From: High Temperature Direct Methanol Fuel Cell Based on Phosphoric Acid PBI Membrane J. Fuel Cell Sci. Technol. 2011;8(6): doi: / Arrhenius plot for 1 M methanol oxidation at different temperatures using 0.5 M phosphoric acids, the catalyst loading was 0.02 mg · cm−2 Pt-Ru and 20% wt PBI Figure Legend:

Date of download: 6/1/2016 Copyright © ASME. All rights reserved. From: High Temperature Direct Methanol Fuel Cell Based on Phosphoric Acid PBI Membrane J. Fuel Cell Sci. Technol. 2011;8(6): doi: / Methanol oxidation comparison between PBI and Nafion as binder at different temperatures using 0.5 M phosphoric acids, catalyst loading was 0.02 mg · cm−2 Pt-Ru (1.0 M methanol) Figure Legend:

Date of download: 6/1/2016 Copyright © ASME. All rights reserved. From: High Temperature Direct Methanol Fuel Cell Based on Phosphoric Acid PBI Membrane J. Fuel Cell Sci. Technol. 2011;8(6): doi: / (a) Cathode performances for oxygen reduction operating at different temperatures using air with loading of 0.5 mg cm−2 Pt (2% vol methanol, H2: with hydrogen feed at the anode). (b) Cathode performances for oxygen reduction operating at different temperatures using oxygen with loading of 0.5 mg cm−2 Pt (2% vol methanol, H2: with hydrogen feed at the anode). Figure Legend:

Date of download: 6/1/2016 Copyright © ASME. All rights reserved. From: High Temperature Direct Methanol Fuel Cell Based on Phosphoric Acid PBI Membrane J. Fuel Cell Sci. Technol. 2011;8(6): doi: / HT-DMFC operating with oxygen and air using 30% and 50% Pt/C on the cathode, the catalyst loadings was 1/0.5 mg · cm−2 Pt-Ru/Pt for anode/cathode Figure Legend:

Date of download: 6/1/2016 Copyright © ASME. All rights reserved. From: High Temperature Direct Methanol Fuel Cell Based on Phosphoric Acid PBI Membrane J. Fuel Cell Sci. Technol. 2011;8(6): doi: / effect of operating time on cell performance for methanol oxidation operating at temperature of 120 °C using 2% vol MeOH and a loading of 1 mg · cm−2 Pt-Ru for anode Figure Legend:

Date of download: 6/1/2016 Copyright © ASME. All rights reserved. From: High Temperature Direct Methanol Fuel Cell Based on Phosphoric Acid PBI Membrane J. Fuel Cell Sci. Technol. 2011;8(6): doi: / Anode performances for methanol oxidation operating at temperature of 120 °C using 2% vol MeOH and a loading of 1 mg · cm−2 Pt- Ru for anode over a week of operation Figure Legend: