Strategic fit Customer segmentation Jotachar JF750 will service both the Offshore & HPI concepts:

The time saving solution… Jotun is one of the world’s leading manufacturers of paints, coatings and powder coatings Our protective coatings are protecting assets in industries such as offshore, energy, infrastructure and hydrocarbon processing Jotachar introduces the next generation of epoxy passive fire protection Jotachar JF750 – the only mesh free solution for jet fire scenarios Jotachar JF750 represents a new era of mesh free PFP solutions, saving installation time, material costs and speeding up project completion Jotachar is the time saving solution

Introducing a new era of mesh free epoxy PFP Jotachar JF750 incorporates an advanced fibre matrix in the material. This technology, combined with a robust and temperature stable insulating char, eliminates the need for complex mesh reinforcement

The next generation of epoxy PFP Mesh free for hydrocarbon pool and jet fire scenarios Less complexity reduces risk Reduces installation time by up to 40%

Jotachar JF750 versus Traditional Epoxy PFP Substantial savings on installed material cost *Based on a typical 6,000m2 project: 60 minute jet fire scenario Jotachar JF750 – no mesh, no installation cost 23% total cost saving on this example

Mesh Free PFP Less risk. Less complex. No complex certification rules to follow No mesh depth or overlap rules to fulfil No measuring, no cutting, no installing No detachment on overlaps No PFP detachment from mesh No risk of water ingress at mesh terminations Easier to upgrade pool fire areas to jet fire Easier to repair and maintain

Mesh Free PFP Meets the industry’s most rigorous standards ISO 22899 Jet Fire Certification ISO 834-3/BS476 Hydrocarbon Fire Test for structures and ‘H’ class divisions Compliant with NORSOK M-501 Revision 6 for durability Resistant to blast – tested to 4 bar over pressure Approved to UL1709 – 45 to 240 minutes fire protection Classification Society recognition by: Lloyd’s Register, Det Norske Veritas, ABS & BV

Fully tested and compliant to NORSOK M-501 Revision 6 ISO 20340: Cyclic Durability Testing ISO 4624: Adhesion Testing ISO 4628-6: Degradation of coatings ISO 874/BS 476 Part 21 Water absorption “NO REDUCTION IN FIRE PERFORMANCE AFTER ISO 20340 CYCLICAL TESTING”

Up to 60% reduction in application time for 60 minute fire scenarios* Reduce application time and costs Increase productivity Reduce installer down time on site Faster project completion Ease of application with two component heated plural spray unit Easy 1:1 mixing ratio

A unique time saving offer from Jotun Mesh free epoxy PFP for jet fire protection Significant reduction in installation man hours Potential one coat for 30 or 60 min jet fire scenarios Risk free Installation. No need for complex mesh Saving project installation costs