C.I.Agent Solutions ® is THE LEADER in Secondary Containment for the Utility Industry

Allegheny Power Duke Energy Eastern Kentucky Power First Energy Georgia Power Grand River Dam Authority Lower Colorado River Authority Progress Energy WE Energies Wolverine Power and more! Over 8,000 applications with companies you’ll recognize like:

Secondary Containment for Wind Farms

By using proven technology from C.I.Agent Solutions ®, you will protect: The environment Your equipment The property

1. Barrier Boom 2. Barrier Boom with Liner 3. Polyvinyl Blanket System with Barrier Boom Walls Multiple types of C.I.Agent ® Secondary Containment to choose from: All solutions exceed 40 CFR 112 SPCC requirements

C.I.Agent ® Barrier Boom - Constructed of non-woven geo-textile material filled with C.I.Agent ® Granules and backed with Agent-X, a non-woven geo-textile material with C.I.Agent ® embedded within the fabric - Easy to install; typically completed in one or two days with no special tools - Equipment is kept fully energized during installation - Typically reduces containment costs by 50-80%

C.I.Agent ® Barrier Boom How it’s Constructed The inner wall of the C.I.Agent ® Barrier Boom is a basic geo-textile made from a patented blend of recycled synthetic polyester materials that are both hydrophobic and oleophillic. The material wicks the oil throughout its fibers and has a tremendous load capability per square inch. C.I.Agent ® is a non-toxic, non-hazardous, and environ- mentally friendly blend of cross-linking polymers that encapsulates transformer oils into a cohesive rubber- like mass on contact. Agent-X makes up the outer wall of the C.I.Agent ® Barrier Boom. It is made of two layers of a geo-textile with C.I.Agent ® polymers embedded between the layers. The material itself has a tremendous filtering effect and keeps oil from passing through this unique final outside wall. Another unique feature is the quilting pattern (not shown) that keeps the C.I.Agent ® polymers from shifting during handling and installation.

A typical C.I.Agent ® Barrier Boom install may look like this.

C.I.Agent ® Barrier Boom Dike Containment Method for Pad Mounts A trench is dug around the pad mount and Barrier Boom is put in place.

C.I.Agent ® Barrier Boom Dike Containment for Pad Mounts (cont.) Washed stone (AASHTO #57 or equivalent) is placed around the Barrier Boom.

C.I.Agent ® Barrier Boom Dike Containment for Pad Mounts (cont.) Stone is then placed over the Barrier Boom to form a dike.

with Liner Method for Pad Mount C.I.Agent ® Barrier Boom The site is prepared and vinyl is put in place.

with Liner for Pad Mount (cont.) C.I.Agent ® Barrier Boom The vinyl is positioned against the pad mount and the tower base.

with Liner for Pad Mount (cont.) C.I.Agent ® Barrier Boom The vinyl is adhered to the pad mount and tower base.

with Liner for Pad Mount (cont.) C.I.Agent ® Barrier Boom Stakes and Barrier Boom are put in position.

with Liner for Pad Mount (cont.) C.I.Agent ® Barrier Boom Barrier Boom is fitted up against the base and glued into position.

with Liner for Pad Mount (cont.) C.I.Agent ® Barrier Boom A polyvinyl flap on the bottom of the Barrier Boom goes under the vinyl.

with Liner for Pad Mount (cont.) C.I.Agent ® Barrier Boom Granular Bentonite ® is placed on the overlap of vinyl and Barrier Boom to form a clay seal.

with Liner for Pad Mount (cont.) C.I.Agent ® Barrier Boom Washed stone (AASHTO #57 or equivalent) is placed around the Barrier Boom.

with Liner for Pad Mount (cont.) C.I.Agent ® Barrier Boom The finished job.

- Provides 100+ percent hydrocarbon containment in sandy or undetermined subsoils - Made of 22 or 40 oz. polyvinyl with pre-formed corners - Sidewall are constructed C.I.Agent ® Barrier Boom to encapsulate the hydrocarbons - Custom made to your specifications C.I.Agent ® Polyvinyl Blanket System with Barrier Boom Side Walls

A typical C.I.Agent ® Polyvinyl Blanket System may look like this.

C.I.Agent ® Polyvinyl Blanket System with Barrier Boom Side Walls (cont.) Preparing the site.

C.I.Agent ® Polyvinyl Blanket System with Barrier Boom Side Walls (cont.) Pea gravel is placed around the pad mount.

C.I.Agent ® Polyvinyl Blanket System with Barrier Boom Side Walls (cont.) Polyvinyl Blanket is positioned around the pad mount.

C.I.Agent ® Polyvinyl Blanket System with Barrier Boom Side Walls (cont.) Vinyl is positioned up on the sides of the pad mount.

C.I.Agent ® Polyvinyl Blanket System with Barrier Boom Side Walls (cont.) Polyvinyl Blanket seams are glued.

C.I.Agent ® Polyvinyl Blanket System with Barrier Boom Side Walls (cont.) Adhesive is applied to the side of the pad mount and the polyvinyl is brought up and glued in place.

C.I.Agent ® Polyvinyl Blanket System with Barrier Boom Side Walls (cont.) The Barrier Boom side walls are staked.

C.I.Agent ® Polyvinyl Blanket System with Barrier Boom Side Walls (cont.) Granular Bentonite ® is poured around conduits and pipes.

C.I.Agent ® Polyvinyl Blanket System with Barrier Boom Side Walls (cont.) Washed stone (AASHTO #57 or equivalent) is placed on the Polyvinyl Blanket.

C.I.Agent ® Polyvinyl Blanket System with Barrier Boom Side Walls (cont.) The stone is spread around and the job is done.

C.I.Agent ® Polyvinyl Blanket System with Barrier Boom Side Walls (cont.) Finished job.

C.I.Agent Solutions ® Secondary Containment products are backed by a Product and Pollution Insurance Policy. No other company offers this protection.

For more information contact: Terry L. Masters National Sales Manager C.I.Agent Solutions Commonwealth Drive Louisville, KY Than k You