doc.: IEEE /1006r0 Submission September 2005 Andrew McDonald, Siemens Roke ManorSlide 1 Initial Network Selection Concept Notice: This document has been prepared to assist IEEE It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein. Release: The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEE’s name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s sole discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor also acknowledges and accepts that this contribution may be made public by IEEE Patent Policy and Procedures: The contributor is familiar with the IEEE 802 Patent Policy and Procedures, including the statement "IEEE standards may include the known use of patent(s), including patent applications, provided the IEEE receives assurance from the patent holder or applicant with respect to patents essential for compliance with both mandatory and optional portions of the standard." Early disclosure to the Working Group of patent information that might be relevant to the standard is essential to reduce the possibility for delays in the development process and increase the likelihood that the draft publication will be approved for publication. Please notify the Chair as early as possible, in written or electronic form, if patented technology (or technology under patent application) might be incorporated into a draft standard being developed within the IEEE Working Group. If you have questions, contact the IEEE Patent Committee Administrator at. Date: Authors:

doc.: IEEE /1006r0 Submission September 2005 Andrew McDonald, Siemens Roke ManorSlide 2 Abstract This document specifies a proposal to address the requirements in the Network Selection Cluster for TGu. The proposal specifies additional Information Elements for use in Probe Request and Probe Response messages to provide information required by the STA as part of its network selection decision before association.

doc.: IEEE /1006r0 Submission September 2005 Andrew McDonald, Siemens Roke ManorSlide 3 Using a Probe Request/Response to Determine Support for an NAI NAI given in Probe Request Probe Response indicates whether the AAA infrastructure can authenticate the user

doc.: IEEE /1006r0 Submission September 2005 Andrew McDonald, Siemens Roke ManorSlide 4 New Information Elements NAI can be limited to NAI in Probe Request NAI plus ack/nack flag in Probe Request

doc.: IEEE /1006r0 Submission September 2005 Andrew McDonald, Siemens Roke ManorSlide 5 Using Probe Request/Response for IEEE Information Service IEs

doc.: IEEE /1006r0 Submission September 2005 Andrew McDonald, Siemens Roke ManorSlide 6 New Information Elements List of requested IEs in Probe Request Set of IEs in Probe Request

doc.: IEEE /1006r0 Submission September 2005 Andrew McDonald, Siemens Roke ManorSlide 7 Requirements Conformance (Self Evaluation) Addresses all of the requirements in the Network Selection Cluster of IEEE /0822r0 with a classification of ‘Required’ –R0N1, R0N2, R0N3, R0N4 It does not attempt to satisfy the optional requirement R0N5 or the out-of-scope requirements R0N6 and R0N7. It may fulfil some of the requirements in the IEEE MIH Support Cluster. Minimization of battery consumption has been considered (as suggested by d15M1 of IEEE /0279r15 ) Scalability issues considered –Directed messages –‘NAI Probe’ mechanism scales O(1) with number of SSPNs –Scalability considerations IEEE related components requires further details from IEEE

doc.: IEEE /1006r0 Submission September 2005 Andrew McDonald, Siemens Roke ManorSlide 8 References u-initial-network-selection-concept.doc