EuCARD-2 is co-funded by the partners and the European Commission under Capacities 7th Framework Programme, Grant Agreement Knowledge and Technology Transfer within EuCARD2 WP2 – Catalysing Innovation EuCARD-2 Project - 3rd Annual Meeting - 26 to 28 April Valletta, Malta Dr Vlad Skarda, STFC

WP2 – Catalysing Innovation  Why Knowledge and Technology Transfer (KTT) and workshops with industry Increasing role of innovation - seen as a strategic driver of the economic development - impact Knowledge exchange activities help to form the links between the researchers and their institutes with industrial companies, through which the technical and scientific expertise is exchanged and ultimately transferred to industry. Research and Development (R&D), collaboration efforts to produce product and novel process There are already a number of R&D industrial collaborations within the EuCARD2 Workshops with industry – to widen the scope of exploitation

Activities within WP2 Task 1: Coordination and Communication – Advertising and collaborating where appropriate with other WPs on networking events with industry Task 2: Transferring Innovation to Society (in particular Industry), grouped in two categories: – Technology scouting: interviews performed with the WPs to identify key technological areas within EuCARD-2 that may become future objects of dissemination activities and ‘EuCARD 2 meets the industry’ events – Technology promotion: actively marketing the technologies from EuCARD 2 with higher maturity rate to industry and to other research organisations outside the consortium

Dissemination  Existing KT networks are used to disseminate relevant results and information during events with industry  Existing knowledge transfer networks - used to promote the workshop with industry. EEN - The Enterprise Europe Network, helping small business to make the most of the European marketplace ENET - CERN’s network of KTOs in the Member States HEPTech - Leading HEP technologies for industry Technology Transfer opportunities STFC Innovations Club (~1500 academic and industrial members) EuCARD-2 community Targeted marketing - direct marketing and invitations  Aim is to collaborate with these networks rather than duplicate efforts in dissemination of the results

Organised/attended events Co-organised/attended events with EuCARD 2 content Title of eventDateVenueLink to event or report Workshop on Accelerators for ADS CERN, Geneva, CHindico.cern.ch/event/ / Hannover Messe Hannover, DEcds.cern.ch/record/ EnEfficient RF Source Workshop STFC, Daresbury, UKindico.cern.ch/event/ / SEMI-THERM San Jose, USsemi-therm.org Compact Accelerators for Isotope Production STFC, Daresbury, UKindico.cern.ch/event/ The Applications of Particle Accelerators in Europe 18-19/6/2015London, UKindico.cern.ch/event/ /timetable/#all.detailed Applications of Thermal Management Materials CERN, Geneva, CHindico.cern.ch/event/ /

Deliverables & Milestones EuCARD 2 WP2 has a total of 2 deliverables (reports) and 3 milestones (EuCARD 2 meets industry events) MS13 was postponed to avoid overlap with other events CodeTitleDate and statusLink to event or report D2.1EuCARD-2 Key Technology Areas M12, achievedhttps://edms.cern.ch/d ocument/ /4 MS13Compact Accelerators for Isotope Production M18, achieved M23 (justified) indico.cern.ch/event/ MS14Thermal Management Materials for Industry M30, achievedindico.cern.ch/event/ / MS15To be decidedM42 (Nov/Dec)To be prepared D2.2Final work package report M44 (Jan 2017)To be prepared

WPs Overview and Analysis WPWP TypeMarket/Scope outside HEP Time to market Potential for KTT Workshop wanted - ready for industry engagement Ranking (timing) 3R&D on energy efficiencyEnergyNear term*HighYes1 4Network (large), focus is on complete accelerators Energy, medical, security Near to medium term MediumYes3 5HEP Network, focus is on extreme accelerators None at present, focus is on HEP area Long termLow No- 6Network, focus is on ultra-low emittance accelerator rings Light sources, medical and industrial applications Near to medium term HighYes, bringing together system users and industry 2 7Network to design fully operational accelerator facility Photon science, medical sector, semiconductor industry Medium term* Not at present No- 8Support access to ICTFNone at presentLong term*Not at present No - 9Development and testing of instrumentation under extreme environments Medical and cryogenic industry, condition monitoring Near to medium term High Yes 2 10R&D on HTS magnetsMedical sector and applied superconductivity Medium termHighPotentially in additive manufacturing / 3D printing 2 11R&D on novel materials for LHC collimators Thermal management applications e.g. power electronics, aerospace and gas turbines Near to Medium HighYes 1 12R&D on high gradient cavities, SRF thin films Medical, security, environment and industrial processing sectors Medium term High Yes 3 13R&D on laser plasma acceleratorsMedical, security, testing of materials Medium termHighPotentially in the future-

Planned initiative EuCARD-2 meets Industry event #3 to be organised jointly between WP2 (STFC and CERN) and other WP around month 42 (Nov. 16) of the EuCARD-2 project Planned workshop / 3 choices: Title of eventDateVenueWP High Efficiency KlystronsSummer 2017??3/12/2 Low energy electron beams for industrial and environmental applications Early Dec Warsaw, Dresden Huddersfield Oxford or Daresbury CERN, Geneva 4/2 Advanced Low Emittance Ring Technology 16 Sept. 16Elettra, Trieste6/2

Possible 3rd workshop with industry Timescales (Nov Jan. 2017) WP3/WP12 - High Efficiency Klystrons Already good collaboration with industry - High Efficiency International Klystron Activity (HEIKA) Industries involved include Thales (France), ScandiNova (Sweden) and VDBT (Russia). Several US/Japanese companies are on-board and other companies might follow Meetings held in January this year (CLIC Workshop at CERN) and another one planned for summer 2017 Already covered well, possible meeting date too late for WP2?

Possible 3rd workshop with industry Timescales (Nov Jan. 2017) WP4 - Low energy electron beams for industrial and environmental applications There are more than of these in operation Developments are required at the higher energies (5- 10 MeV) and for the new environmental applications. Industrial – Food and agriculture, sterilization, materials processing and modification Environmental – Flue gas treatment (SOx, NOx,VOC), wastewater, biological sludge

Possible 3rd workshop with industry Timescales (Nov Jan. 2017)  WP6 – Advanced Low Emittance Ring Technology The workshop would deal with: state of the art technology of magnets, vacuum and power supplies attract system users and component manufacturers foster the collaboration (R&D) links with industry have talks by WP6 and the industry  WP6 have already earmarked dates – September 2016 at Elettra - ALERT2016 – Workshop with industry would be scheduled for 16 Sept. 2016

Suggestions? Comments? Thank you