 WAVE - a transfer of energy that does not transfer matter.  MEDIUM –the substance that a wave moves in.  OSCILLATION – to swing or move regularly back and forth.  PROPAGATION – to transmit or move through a medium.  FYI - In a wave, the energy moves through the medium, BUT THE OBJECT STAYS PUT (although it may oscillate).

MECHANICAL WAVES Need a medium to propagate. (sound, water, etc.) ELECTROMAGNETIC WAVES Do not need a medium to propagate in.

 Memory trick: Red Martians invade Venus using x-ray guns.

Transverse Waves Waves in which the oscillation of the medium is perpendicular to the propagation of the wave. Longitudinal (or Compression) Waves in which the oscillation of the medium is parallel to the propagation of the wave.

Crest & Trough – the high and low points on a transverse wave Wavelength – the length of one complete wave cycle. (e.g. – crest to crest, trough to trough)

Wavelength, Compressions & Rarefactions in longitudinal waves correspond to wavelengths, crests & troughs in transverse waves.

Amplitude – refers to the distance the medium oscillates from equilibrium. Amplitude indicates the amount of in the wave.

Wave Period – the time it take for one complete wave cycle to pass by a given point. Frequency – the number of waves that pass by a given point per second. Frequency & Period are related

V = ƒ λ velocity = frequency * wavelength

Q1. A sound wave has a frequency of 3250 Hz and a wavelength of 0·1 m. What is its velocity?frequencywavelengthvelocity Q2. A sound wave travels with a velocity of 330 m/s and has a frequency of 500 Hz. What is its wavelength?330 m/s Q3. A wave at sea travels with a velocity of 25 m/s. If it has a wavelength of 10 m, what is its frequency?

Constructive InterferenceConstructive Interference – The addition of two or more overlapping waves that produced a wave of increased amplitude. Superposition Principle – The total amplitude caused by two or more waves occupying the same space in a medium is equal to the sum of the amplitudes of each of the individual waves.

Wave Interference: when two waves get to the same spot at the same time Destructive Interference Destructive Interference – The addition of two or more overlapping waves that produces waves of decreased amplitude.

The bouncing back of waves as they strike a barrier or encounter the boundary of another medium.

Law or Reflection – Angle of incidence = Angle of Reflection All angles are measured with respect to the normal Normal – dotted line drawn perpendicular to the surface where the light ray hits the reflecting surface

The changing direction of waves as they pass into different mediums. Check this out! Check this out! (link) When a wave enters a new medium, the change in density of a new medium causes the wave to travel at a different speed. If the new medium is more dense, the wave will slow down. If it is less dense, the wave will speed up.

Occurs when a wave passes an edge, passes through a narrow gap or goes past an object. None of the properties of a wave are changed by diffraction. The wavelength, frequency, period and speed are same before and after diffraction. The only change is the direction in which the wave is traveling.

 Nearly all objects, when hit or struck or plucked or somehow disturbed, will vibrate. If you drop a meter stick on the floor, it will begin to vibrate. If you pluck a guitar string, it will begin to vibrate. If you blow over the top of a pop bottle, the air inside will vibrate.  When each of these objects vibrates, they tend to vibrate at a particular frequency. The frequency at which an object tends to vibrate with when hit, struck, plucked, strummed or somehow disturbed is known as the natural frequency of the object.  Musical instruments vibrate at their natural frequency when a person hits,natural frequency strikes, strums, plucks or somehow disturbs the object.

When one object vibrating at the same natural frequency of a second object forces that second object to start vibrating.

A guitar player is seated next to a piano. The piano player strikes an E key on the piano. The guitarist reports that this causes the E string on his guitar to vibrate. What is the name of this phenomenon? F interference G the Doppler effect H resonance J standing waves

 A method of reducing the number of planes that light waves are vibrating in.  Polarizing sun glasses reduce glare by blocking light waves vibrating in a certain direction.

Polarized light vibrates in only one direction:

Which of the following is not true about a wave? A. Its energy increases as its amplitude increases. B. Its frequency increases as its wavelength decreases. C. Its velocity is equal to its frequency times its wavelength. D. It transfers the particles of the medium along with the energy created by the disturbance.

Which wave has the greatest velocity?

At 0°C sound travels through air at a speed of 330 m/s. If a sound wave is produced with a wavelength of 0.10 m, what is the wave’s frequency? F Hz G 33 Hz H 330 Hz J 3300 Hz

The diagram shows waves approaching a barrier. Which pattern will be formed after the waves pass through the opening in the barrier? Also – what is the name of the wave phenomenon shown?

Polarized sunglasses are useful because – F. They are dark and don’t allow as much light to come through. G. They reflect much of the light from their surfaces. H. They filter out the horizontal transverse waves in light while allowing only the vertical waves to get to the eyes. J. They both diffract and refract light.

Dolphins and bats use echolocation to hunt prey. They determine the distance to their prey by sending sound waves out and measuring the time it takes for the sound wave to return. This demonstrates the ability of sound waves to A. Refract B. Interfere C. Reflect D. Polarize

When trying to spear a fish in water, a person needs to take into account the way light bends as it moves from water into air. The bending of light as it passes from one medium into another is known as — F reflection G refraction H diffraction J polarization

One tuning fork is struck and placed next to an identical fork. The two forks do not touch. The second tuning fork starts to vibrate because of — F interference G the Doppler effect H resonance J standing waves