TECH DEMO QUIZ sound

1. How do we set the audio switches on the C100 camera to enable the on board mic to be activated?

2. How do you set up the C100 camera so that it is ready to receive a mixer?

3. Explain what tone is? What do you use it for?

4. What does the LCR switch do on the mixer?

5. On the C100 camera’s audio metering system, where does the reference tone want to be set to? Express this as a dB value.

6 On the mixer’s audio metering system where should natural dialogue be peaking at? Express this as a dB value.

7. What is phantom power? What Voltage do our phantom powered mics require?

8. List the things/steps you need to do prior to doing a sound check?

9. Explain what the return cable is?

10. What is the microphone pick up pattern for a Radio mic? How is this different to a boom mic?

11. When plugging a mixer into a camera what does the input power switch need to be set to on the camera?