HVAC Terminal Applications Programmable Controllers - ECB / ECL-PTU Series

HVAC Programmable Controllers -PTU ECL-PTU-107 ECB-PTU-107 ECL-PTU-207 ECB-PTU-207 ECL-PTU-208 ECB-PTU-208 ECL-PTU-307 ECB-PTU-307 ECL-PTU-308 ECB-PTU-308 The most advanced and efficient solution for addressing any terminal control applications: fan-coil units, unit ventilators, chilled beams, chilled ceilings, small AHU, etc.

Main Characteristics Fast and reliable installation: wiring made easy! Integrated universal power supply - no need for external transformer Removable terminals and rapid quick connectors Powered outputs - no wire jumpers required Optional strain-relief and terminal covers for ceiling installations without metal electrical cabinet Very low standby power consumption : < 1W Temperature sensor dedicated inputs Universal inputs (0-10V, Digital, CTN 10kΩ) Counting capabilities - up to 20 Hz Dedicated outputs: valves, fan, electric heater Intuitive and graphical programming with EC-gfxProgram CERTIFIED PERFORMANCE eu.bac, LONMARK, BTL, WSPCert, CE, UL…

Inputs and Outputs of each Model Digital Inputs Univ. Inputs 10k Sensor Elec. Heater Fan Outputs Triac outputs Analogue O. Other ECL-PTU-107 ECB-PTU-107 3 2 1 1x 2 kW 2x 100-240 VAC ECL-PTU-207 ECB-PTU-207 4 ECL-PTU-208 ECB-PTU-208 2x 24 VAC Power supply 24 VAC/ 12VA ECL-PTU-307 ECB-PTU-307 2x 1 kW 4x 100-240 VAC ECL-PTU-308 ECB-PTU-308 4x 24 VAC Power supply 24 VAC/ 12VA

Now with Preloaded Applications

Inputs Configuration Room Sensors Hardware Inputs EC-Smart-Vue Series (-C, -CH, CHM, -H, -HM, -M) EC-Smart-Comfort Series (-S, -O, -SO, -SF, -SOF) EC-Smart-Air Series (-C, -CH, -H) EC-Multi-Sensor Series (-M, -ML, -MLT) EC-Remote Series (-T) EC-Sensor Series (-S, -O, -SO, -SOF) EC-Sensor-SOF supported only by ECL/ECB-PTU-107) Hardware Inputs UI1 : 0-10V CO2 Sensor (ECL/ECB-PTU-107: Fan Speed Selector) UI2 : SpOffset/DischargeTemp/ReturnTemp/WaterTemp/Unused SI3 : SpaceTemp/DischargeTemp/ReturnTemp/WaterTemp/Unused DI4 : Unused/WindowContact(NO-NC) DI5 : Unused/AuxContact(NO-NC)/ChangeOver(Htg-Cool)/CondSensor(NO-NC) DI6 : Unused/AuxContact(NO-NC)/ChangeOver(Htg-Cool)/OccSensor(NO-NC)

System and Outputs Configuration Fan Type None (Ceiling System) 3 Speed (Fan Coil Unit) Variable Speed (Fan Coil Unit) System Type 2 pipes cooling 2 pipes cooling with electric heater 2 pipes heating 2 pipes heating with electric heater 2 pipes change-over 2 pipes change-over with electric heater 4 pipes 4 pipes with electric heater Damper Type None 0-10V/2-10V Valves Type Thermal Digital 0-10V Floating (Raise-Lower)

dcgfxApplications – Main Page

dcgfxApplications - Configuration

Application Configuration dcgfxApplications – AppConfig EC-Smart-Vue – Advanced Menu Also possible from any BACnet or LonWorks enable software

Wiring Diagrams

Wiring Diagrams

ECB-PTU Auto Master/Slave From Master Room Occupancy Hvac Mode (Heat/Cool) Change-Over Status Condensation Sensor Space Temperature (Optional) CO2 Sensor (Optional) From Slave Motion Detection Hvac Mode Request(Heat/Cool) From Master and Slave Setpoint Offset Fan Speed Occupancy Override

Programming with EC-gfxProgram One interface to program all ECL, ECB and ECLYPSE controllers, providing an intuitive and customizable block-oriented environment. Complete with gfxApplications, an extensive library of pre-engineered HVAC applications Direct connection to controller (ECY Series) Configurable alarm message text (ECY Series) Real time troubleshooting through live-debugging Supplied Toolbox including more than 100 pre-defined functions Built-in schedule configuration Simultaneous update to multiple devices Dynamic points allocation (ECY Series) Multiple resource configuration (ECY Series) Ob MORE INFO

ECx-Light / Blind Expansion Modules For Additional Lighting and Sunblind Management Model Digital Inputs On/off Dimming DALI 230 VAC 24 VDC ECx-Light-4 4 4 x ON/OFF ECx- Light-4D 4 x 1-10V (ON/OFF supported) ECx-Light-4DALI 4 groups 16 ballasts ECx-Blind-4 ECx-Blind-4LV Build your own Smart Room Control solution! MORE INFO

Complementary Products AllureTM Discrete Analogue or Wireless, Battery-less Sensors Room Devices infrared or radio AllureTM Communicating Sensors A broad array of models suitable for a wide range of environments and applications: from analogue and wireless, battery-less discrete sensors to intelligent communicating sensors with ECO-Vue feature… MORE INFO

Personalised Comfort…

Room Devices - for ECL / ECB-PTU Series PRODUCTS NAMES DESCRIPTION Allure EC-Smart-Vue, -C, -H, -M … -CHM Communicating Room Sensor Device - RJ45 Allure EC-Smart-Comfort, -S, -SF, -SO, -SOF + 8 Digital Inputs (-DI) in option Communicating Room Sensor Device - RJ45, with optional Smart-Light and Smart-Blind add-on push-buttons Allure EC-Smart-Air, -H, -C, -CH Communicating Room Sensor Device - RJ45 Temperature, Humidity and CO2 sensing Allure EC-Sensor, -O, -S, -SO or -SOF Room Sensor Device - Analogue Allure ECW- Sensor, -O, -S, -SO or -SOF Room Sensor Device - EnOcean, Open-to-WirelessTM EC-Remote-I, -IT Remote Control - infrared (Integrated temperature sensor in option) EC-Multi-Sensor-I, -P, -PL or -PLT Multi-sensor (infrared receiver, presence detector and/or Lux level sensor, temperature in option) Wireless Receiver Wireless Receiver – EnOcean, Open-to-WirelessTM

Thank You for Your Attention