A new Profiler product

Profino Multi Channel Programmable Filter - Amplifier Designed for both digital and analogue channels

4 inputs  4 inputs : B I-FM, B III / DAB and 2 UHF inputs splitted over 5 UHF programmable clusters  UHF clusters can have 1 to 7 channels bandwidth  B III/ DAB input with 1 or 4 channels bandwidth filter  BI-FM input for B I or FM or B I + FM  High selectivity filters  Low noise and high gain split band amplifiers  Selectable remote power on B III and UHF inputs

Outputs Test Output -30 dB Output DSUB9 Connector “Copy” function in order to transfer all settings from one unit to another reducing time of installation

Description

Operation Easy programming All parameters are set with the rotary push button. Each function and parameters are shown on 2 digits display and different LED ’ s.

4 inputsOperation Push on the rotary button for more than 3 seconds to enter into the programming mode

Programming Turn the button to select the desired mode - the LED is green Push the button to enter the selected mode - the LED is red Inside the mode, turn the button to select the parameter (input, cluster, channels, level...) Push the rotary button to confirm

Security code Unit can be locked by security code Free access to programming mode or access to programming mode with Security code “ 50 ”

Cluster programming Setting clusters / UHF input The amplifier has 2 UHF inputs which are splitted over 5 clusters There are 3 possible configurations:

Setting channels / cluster Each UHF cluster has a bandwidth which can be programmed from 1 to 7 channels Cluster programming START CHANNEL STOP CHANNEL

Input BI-FM can be programmed for BI, FM or BI+FM B III/ DAB input has 1 or 4 channels bandwidth filter Cluster programming Ch 05 to 12 for the “ B/G ” standard L5 to L10 for the “ L ” standard

Level adjustment Attenuators with 1 dB step for accurate equalization BI-FM Attenuator is 20 dB BIII / DAB and UHF is 30 dB

Level adjustment High UHF input levels up to 105 dBµV by switchable 20 dB input amplifier

DC remote power Unit can power 12 or 24 volt outdoor preamplifiers on BIII / DAB and UHF inputs

Copy function All settings from one unit to another unit Copy from Memory Stick (ref optional)

Block diagram

Technical specifications

Unitron nv Frankrijklaan Poperinge - Belgium Tel.: ++32(0) Fax: ++32(0)