Date of download: 6/24/2016 Copyright © ASME. All rights reserved. From: Characterization of “Bulk Lithography” Process for Fabrication of Three-Dimensional Microstructures J. Micro Nano-Manuf. 2013;1(4): doi: / Schematic representations of (a) CAD model slicing strategy in bulk lithography and (b) cured depth experimental setup and 3D microfabrication using bulk lithography [19] Figure Legend:
Date of download: 6/24/2016 Copyright © ASME. All rights reserved. From: Characterization of “Bulk Lithography” Process for Fabrication of Three-Dimensional Microstructures J. Micro Nano-Manuf. 2013;1(4): doi: / Experimental results of dimensionless cured depth against dimensionless energy at constant duration (s) of exposure for TMPTA- based resin (a) under lower energy exposure and comparison with published results and (b) under wide range of energy exposure [19] Figure Legend:
Date of download: 6/24/2016 Copyright © ASME. All rights reserved. From: Characterization of “Bulk Lithography” Process for Fabrication of Three-Dimensional Microstructures J. Micro Nano-Manuf. 2013;1(4): doi: / Experimental results of dimensionless cured depth against dimensionless energy at constant duration (s) of exposure along with proposed cure depth model: (a) resin, TMPTA and (b) resin, HDDA Figure Legend:
Date of download: 6/24/2016 Copyright © ASME. All rights reserved. From: Characterization of “Bulk Lithography” Process for Fabrication of Three-Dimensional Microstructures J. Micro Nano-Manuf. 2013;1(4): doi: / Variation of parameter “a” and “b” against exposure time for TMPTA-based resin Figure Legend:
Date of download: 6/24/2016 Copyright © ASME. All rights reserved. From: Characterization of “Bulk Lithography” Process for Fabrication of Three-Dimensional Microstructures J. Micro Nano-Manuf. 2013;1(4): doi: / SEM image of lateral surface of the 3D microstructure fabricated using conventional scanning MSL Figure Legend:
Date of download: 6/24/2016 Copyright © ASME. All rights reserved. From: Characterization of “Bulk Lithography” Process for Fabrication of Three-Dimensional Microstructures J. Micro Nano-Manuf. 2013;1(4): doi: / SEM image of the variable depth microstructure (sine wave) using bulk lithography corresponding to (a) regime I and (b) regime II Figure Legend:
Date of download: 6/24/2016 Copyright © ASME. All rights reserved. From: Characterization of “Bulk Lithography” Process for Fabrication of Three-Dimensional Microstructures J. Micro Nano-Manuf. 2013;1(4): doi: / Fabrication of microstructure having variable cured depth along radial direction Figure Legend: