Instructions to Sustainable Technology Building Room 113
Contents Sustainable Technology Building Room113 1.How to begin 2.Individual and Combined mode 3.Selecting technology to be projected 4.Laptop connection 5.Volume control 6.Buttons not to be used 7.Turning off system display 8.Contact the ITS Helpdesk at ext or for additional
Turn on Projector With Control Box Panel (If the screen is dark, just touch the screen) STB-113
Press Combined or Individual to Begin (Screen or screens will automatically descend. See next slide when choosing ) STB-113 and 114
Choosing Room Mode STB-113 and 114 From STB-113 you have the option of projecting in just STB- 113 (Individual) or both STB- 113 and 114 (Combined). If choosing combined mode, make sure the system in STB-114 is not projecting. The system in STB-114 can not be used in combined mode only individual.
Selecting Technology to be Projected (Press the icon of the piece of equipment needed to be projected) STB-113 Select Icon
Selecting Technology to be Projected (Double check the individual piece of equipment is turned on) STB-113 Instructions
Selecting Technology to be Projected (Double check the individual piece of equipment is turned on) STB-113 computer Blu-ray player
Laptop Connection (HDMI, VGA and Audio Connections) STB-113 VGA Audio HDMI Power
Volume Control
Buttons not to be used Do not use
Turning off System Display (Press control box “System Off”) System Off
Turning off System Display (Confirm “Yes” on control box) Yes
Turning off System Display (Screen or screens will retract and you will see the message below. System shutdown is complete)
End of Instructions for Sustainable Technology Building Room 113 If you experience any problems, contact the Help Desk at ext or