I-Purge ® MODULAR INFLATABLE BLADDER SYSTEM US & FOREIGN PATENTS ISSUED & PENDING CE APPROVED THE MOST VERSATILE & ADAPTABLE SOLUTION FOR PIPE PURGING MADE IN THE USA

ABOUT I-PURGE

The revolutionary, patent-pending I-Purge Modular Inflatable Bladder System is the most innovative and versatile pipe purging system available. I-Purge creates an impermeable seal to consume the least amount of purge gas during pipe purging and welding, saving time and money, while achieving consistent, high-quality welds.Modular Inflatable Bladder System Manufactured in the USA, this long-term, reusable bladder system enables operators to satisfy a myriad of purge requirements with one interchangeable solution. The I-Purge comes equipped with several highly advanced features such as its Quick Connect Fittings that snap-in place and allow easy assembly and disassembly of components. The I-Purge also features an extended length, high heat resistant harness that allows the bladders to be placed outside the heat affected zone and can also sufficiently accommodate any pre-heating or high heat applications.

These state-of-the-art features allow the operator to create multiple configurations, including a one sided pipe stopper and a reducer. Bladders are available in sizes ranging from 2 to 48″ ( mm) and may be purchased either individually or as a complete system, a distinct advantage should additional sizes be desired or a component need replacing. Ideal for fabrication shops, the I-Purge surpasses existing technology with its advanced design and provides the complete solution for all pipe purging needs. For More Welding Products, Check:

FEATURES AND BENEFITS

1) Inflatable Bladders Modules A & B Manufactured in the USA from the highest quality materials Inflated bladders create an impermeable, air tight seal on pipe wall Spark resistant, durable exterior cover Heavy-duty interior inflatable bag Re-usable, long-lasting solution for purging multiple pipes of the same diameter

2) High Heat Extended Harnesses Internal hose and protective external fiberglass sleeve capable of withstanding high temperatures Flexible bridge harness easily navigates through pipes, including elbows and tees over 90° Kink resistant hose assures continuous gas supply Complete with luminescent indicator for accurate alignment at root gap Various lengths of harnesses are available to accommodate heat affected zone (HAZ) during pre-heating and high heat applications I-Purge sizes 36″ and greater are equipped with a high flow harness to expedite inflation

3) Quick Connect Interchangeable Fittings Push-button feature enables modules to snap-in-place in seconds State-of-the-art technology allows for greater versatility and easy assembly – enabling the user to create multiple configurations Easy change and replacement of components to avoid costly re-purchase of complete system, with spare parts available for purchase Corrosion resistant proven lock mechanism for secure connection

4) Proprietary Relief Valve Factory pre-set relief valves allow for precise flow rates while minimizing set-up time and reducing gas consumption Aids in maintenance of optimum seal on pipe wall Prevents risk of over inflation Low profile relief valve available on 2″ and 3″ models 5) Inert Gas Diffuser Patent-pending technology Reduces turbulence by dispersing inert gas equally in all directions within the weld zone, improving weld quality and consistency

6) Tri-Flow Inner Tubing System (BLUE, BLACK & WHITE Hoses) Multiple inlet/exhaust ports for faster, more efficient purging Separate Connections: BLUE – Inflation of Bladders Initial function is to inflate bladders then flood weld zone with noble gas BLACK – Increase Gas Distribution Within Weld Zone Designed to expedite purging, the secondary (BLACK) purge hose is used to flood the weld zone with inert gas and evacuate oxygen at a faster rate WHITE – Exhaust Connection Connect this hose to an Oxygen Monitor, such as Aquasol’s PRO OX ® -100 that obtains readings down to 100 PPM (0.01%), for continuous or spot monitoring of oxygen in the weld zone

Tri-Flow Inner Tubing SystemSeparate Connections Download our product brochure here: content/uploads/2014/09/i-purge-brochure.pdfhttp:// content/uploads/2014/09/i-purge-brochure.pdf

7) Pull Loops Strong pull loops can be connected to a rope or chain to insert or remove the I-Purge It is important that bladders be deflated before insertion or removal Moderate tension (approx. 5 lbs.) should be applied on pull-wires to prevent sagging of the harness during installation and operation 8) Carrying Bag When welding is complete, bladders can be deflated, extracted, cleaned and stored in the provided carrying bag Carrying bag protects the bladder when not in use from dust and debris in most industrial work environments, prolonging life

9) I-Purge Reducer Unlike other models with permanent fittings, a pipe reducer can be easily created by simply connecting two bladders of different, yet similar diameters Combine different sizes to create unique pipe configurations 10) I-Purge Isolator Inflatable Pipe Stopper & Single Purge Bladder The I-Purge Isolator is designed to function as a pipe plug for a wide range of applications, including purging of valves or tanks, as well as non-purging applications such as pipe system sealing for servicing, cleaning and inspection Constructed of heavy-duty materials designed to withstand the extreme conditions of the petrochemical, utility and construction industries

I-Purge Reducer I-Purge Isolator Inflatable Pipe Stopper & Single Purge Bladder

How I-Purge Works To Know More About I-Purge, Click On This Link Below:

I-Purge Modular System Components: Equipped with the most Advanced Interchangeable Components 1. Module A 2. Module B 3. Quick Connection to Module B 4. Fiberglass High Heat Bridge Harness 5. Quick Connection to Module A 6. Relief Valve 7. Direct Purge (BLACK) Hose 8. Exhaust Monitor Connection 9. Inflation & Purge (BLUE) Hose 10. Luminescent Indicator 11. Pull Loops 12. Gas Diffuser