1 ladder to sector in bond fixture HFT PIXEL 2/18/2009.

Slides:

Advertisements

Similar presentations

J.P. Langston Brake Retrofit

Advertisements

Unit 8 Fastening Systems

Assembly Manual Mike Fortney 04/09/2004 CricketSat Receiver.

Fasteners Used to join together the various parts of the automobile.

1 MANUFACTURING PROCESSES WE REVIEW IN MME2259a DESIGN FOR MANUFACTURING (DFM) 1.Machining - is the process of removing or separating pieces of material.

KEY JOBS EXECUTED MACHINING. PA 21 Tubsheet machining Material :- Forge steel Weight:- 27MT, OD:- Ø5300 Operation:- Faces and Groove machining PA 21 Tubsheet.

HFT PXL Mechanical WBS 1.2 March 2010 Howard Wieman LBNL 1.

Lesson No 05 Week No. 05 Lesson Name Vice.

M. Gilchriese SQP Clearance June 8, M. Gilchriese 2 Overview A1-2 inners have been mounted on backbone An A1-2 outer has been mounted on the backbone.

Major Diameter: The largest diameter of the thread Minor Diameter: The smallest diameter of the thread Pitch: Distance between two threads (mm) or no of.

1 Ladder assembly steps HFT PIXEL updated for ultimate chip ladders 2/12/2012 ladder fixture u.SLDASM.

Naming Convention HFT PIXEL 12-June pixel identification sector – ladder – chip - row - column 1-10in out1 out2 out Alternative.

2- Crankshaft, Piston Pin, and Piston Rod Bushing.

MACHINE TOOL Prof. kiran gore.

Out2 silk screen assembly H. Wieman revised Jan 30, 2009 for aluminum silkscreen frame with 5 mm dowel pins.

…………..Continued Recap Machine tool Lathe machine Basic components

IENG 475: Computer-Controlled Manufacturing Systems Lathe Operations

Connecting crank and pivot shaft assemblies. Press fits, or interference fits are sometimes used in manufacturing to reduce manufacturing costs or liabilities.

Assembly Manual Mike Fortney 04/02/2006 CricketSat Receiver.

HFT PXL Mechanical July 2010 Howard Wieman LBNL 1.

Metal Working Tools.

APPENDIX A (RFI) FOR THE FABRICATION OF MULTIPLE STEEL REACTION STRUCTURES FOR NASA-MSFC STRUCTURAL TESTING Mike Roberts 12/2/09.

Naming Convention HFT PIXEL 12-June-2009 Updated 03/08/2013 By LG to include row and column information for Ultimate sensors.

DESIGN AND FABRICATION OF TURNING FIXTURE FOR ELBOW

J-FRM-0101 Revision with Reason No.DateInitials Drawing No. D’Vinyl Inc. Descriptive Part Name Designed byChecked by Engineer Drawing Type Foot Plate Date.

Vacuum chuck for probe station contacts: Howard Wieman work: cell: Eric Anderssen

TECH 104 – Technical Graphics Communication

Better pointing with HFT PIXELS a focus on the mechanics 15-Jan-2009 Wieman.

Ladder assembly steps HFT PIXEL 1/04/2009 ladder fixture.SLDASM.

“Building Quality to Customer Satisfaction!”. TOTAL QUALITY MACHINING, INC.

1 ladder to sector out2 bond fixture HFT PIXEL 11/16/2008 ladder to out2 bond fixture.SLDASM.

TMT.OPT.PRE REL011 SSA Tower Rework Instructions (for composite sleeve bearings) F. Kamphues.

Snyder Manufacturing, Inc. Safety and Quality are Our No. 1 Priorities! Certified in the Sharp’s Program New York State Department of Labor since 2005.

Shown is the current construction Play between pin and holes in tube is causing the tictac sound. Current Part TicTac Noise (CF#64)

HFT PIXEL Mechanics HFT Review 25-Mar-2009 Wieman.

Girders fabrication: Difficulties to achieve tolerances and machining process Igor Madariaga (ESS-Bilbao) 13 September 2011 DTL mini-workshop, CERN.

1 Manufacturing Projects Flexible Manufacturing Copyright © Texas Education Agency, All rights reserved.

………..Continued - Parts of Radial Drilling Machine -Functions

The Who’s Final Production Presentation “Better than the last one” Paul Freund Mark Radio Chad Swanson.

Cold Metalworking Processes TSM 233 Unit 10. TSM 233 Metallurgy and Welding Processes Cold Metalworking Those metalworking processes where the base metals.

VTX Half LAYER 4 LAYER 3 LAYER 1 LAYER 2 EACH LAYER’S BARRELL MOUNT NEEDS TO BE REFERENCED TO KINEMATIC MOUNTS AND IT’S MOUNTED LADDERS.

Prototype Review 04-Sept Different side-closeout to allow petal end-insertion concept…self- guided… Only backup from last review in July…

1 Manufacturing process-1 ( ) Lathe Operations Guided By:Prepared By: Prof. Stany R. Ghadiyali

ENM208 INTRODUCTION to MACHINING ANADOLU UNİVERSITY Industrial Engineering Department.

ADVANCED MECHANICAL DRAFTING

Section 2 Safety, Tools and Equipment, Shop Practices Unit 6: Fasteners.

PRESENTATION ON LATHE MACHINE

STEP 1: ASSEMBLE INSERT PLATES 1.Assemble insert plates by press fitting roller bearing and adapter plate into assembly 1.1 Prep all mating surfaces to.

Assembly of steering.

UNIT-II TURNING MACHINES

First Wall Panel - Overview

IENG 475: Computer-Controlled Manufacturing Systems Lathe Operations

InNova Motorized version Assembly Instructions

Manual Process Planning

Manual Process Planning

Different Types of Lathe Operations And Alignment Test

Metal Fabrication.

Automotive Engines Theory and Servicing

Endcap shielding senarios:

Please use the top of the slide. The area that will be printed is 4

Threads and Threading.

IENG 475: Computer-Controlled Manufacturing Systems Lathe Operations

PBC Method Flat Mirror Gas Mixture Dielectric Mirror Pump Window PM

Mechanical hardware.

Mechanical hardware.

Manual Process Planning

Valve stem “gag” mechanism

IENG 475: Computer-Controlled Manufacturing Systems Lathe Operations

Automotive Engines Theory and Servicing

Presentation transcript:

1 ladder to sector in bond fixture HFT PIXEL 2/18/2009

2 parts to build part filecurrent job future jobs Finished jobs materialpage sector chuck base in.SLDPRT1 MIC sector chuck cap in.SLDPRT1 MIC sector chuck base out1.SLDPRT MIC sector chuck cap out1.SLDPRT MIC sector chuck out2 base.SLDPRT1 MIC sector chuck out2 cap.SLDPRT1 MIC sector chuck base out3.SLDPRT MIC sector chuck cap out3.SLDPRT MIC ladder chuck.SLDPRT31 MIC z locator.SLDPRT?1 MIC ladder chuck handle.SLDPRT62 3D print black locating pin MMC 8472A11.SLDPRT01 modify MMC part locating pin diamond MMC 8472A19.SLDPRT01 modify MMC part

3 This job is for two additional fixtures like the one previously built. The following slides show the assembly for the previous fixture, but everything applies for the two fixtures to be built in this job, except for a fitting change that appears on page 7

4 sector chuck, important tolerances top surface flat to 1 mil curved edge to pins – 4 mil surface to pin 4 mil (z locator.SLDPRT)

5 a possible machining sequence machine all features except joining holes and listed critical features match drill pin location holes and joining bolt holes pin parts and grind top surface machine listed critical features critical features for last? locating pin holes and curved edge sector chuck out2 cap.SLDPRT sector chuck out2 base.SLDPRT

6 sector chuck parts locating pin MMC 8472A11.SLDPRT bullet nose liner MMC 31335A51, 1 of 3 bullet nose aligning pin MMC 31335A11, 1 of 2 bullet nose diamond aligning pin MMC 31335A311.5 in post hex MMC 91780A361, 1 of 4 sector chuck out2 base.SLDPRT sector chuck out2 cap.SLDPRT plunger pin 1lb MMC 3360A560, 1 of 2 locating pin diamond MMC 8472A19.SLDPRT ¼-20 x 1.5 in, 1 of 4 ¼-20 x 1 in, 1 of 2 z locator.SLDPRT note: locator pins listed as SLDPRTs are purchased parts that require modification we will send in order for all McMaster-Carr parts

7 sector chuck features 1/4 pipe tap for Push-to-Conn Tube Fitting 90 Deg Elbow for 3/8" Tube OD X 1/4" NPTF Male Pipe break external edges sector chuck base out1.SLDPRT sector chuck base out3 1/8 pipe tap for Push-to-Conn Tube Fitting 90 Deg Elbow for 1/4" Tube OD X 1/8" NPTF Male Pipe

8 sector chuck features ¼-20 x2 helicoil sector chuck out2 base.SLDPRT

9 sector chuck features fillets not important can be r=0 to 10 mm sector chuck out2 base.SLDPRT