INSTALL INSULATION IN BOILER PLANT PROJECT SECTIONS: 1.VALVE JACKETS 2.BOILER REFRACTOR JACKETS 3.PIPING INSULATION / PVC

VALVE JACKET SECTION REMOVABLE Quantity = 8 Each

Area 1A

Area 1C 6 Each – Valve Jackets to be installed

Area 1C

Area 1D

BOILER REFRACTOR JACKET SECTION REMOVABLE Quantity = 3 Each

Boiler Refractor Jacket 3 Each – Boiler refractor jackets to be installed

Removable Refractor Jacket SIGHT GLASS SHALL REMAIN OPERATIONAL

Refractor Jacket 12” JACKET OVERLAP ONTO BOILER TANK

PIPING INSULATION / PVC SECTION

TYPICAL SPOT WHERE PVC WRAP CAN BE INSTALLED OVER EXISTING INSULATION

TYPICAL AREA WHERE INSULATION NEEDS TO BE INSTALLED PRIOR TO PVC WRAP. MATCH EXISTING THICKNESS TYPICAL AREA THAT WILL NEED PVC INSTALLED OVER EXISTING INSULATION

TYPICAL AREA WHERE INSULATION NEEDS TO BE REPLACED PRIOR TO PVC WRAP

TYPICAL SPOT WHERE INSULATION NEEDS TO BE REPLACED PRIOR TO PVC WRAP

TYPICAL SPOT WHERE ONLY PVC IS REQUIRED OVER EXISTING INSULATION

TYPICAL BARE PIPE LOCATION WHERE INSULATION IS REQUIRED PRIOR TO PVC WRAP TYPICAL LOCATION WHERE PVC WRAP IS REQUIRED. INSULATION IS IN GOOD CONDITION TYPICAL LOCATION WHERE EXISTING INSULATION NEEDS TO BE REPLACED PRIOR TO PVC WRAP

TYPICAL BARE PIPE LOCATION WHERE INSULATION NEEDS TO BE INSTALLED PRIOR TO PVC WRAP TYPICAL LOCATION WHERE ONLY PVC WRAP IS REQUIRED

TYPICAL AREA WHERE INSULATION NEEDS TO BE REMOVED AND REPLACED WITH NEW AND THEN PVC WRAP INSTALLED

Area where at least 8 feet of insulation shall be replaced as it is damaged on top