Your best partner for LED Life!! Update Date ModelCar Moving Door Scuff Written byDazzle Co., Ltd

Warning  When installing the main unit, do not remove or alter existing vehicle fasteners, including nuts, bolts, screw, clips, and fittings. Never detach, move or alter existing vehicle wiring, including electrical grounds and straps. Alteration of existing vehicle components may make vehicle unsafe to operate. Should be no any electronic devices or magnetic pole around installation place.  Air bags are vital part of a safety system. Never install main unit in a way which will alter air bag wiring or interfere with air bag deployment. Air bags must function properly in the event of an accident.  Before installing, check the location of pipe, tank, electrical cables and others.  Read and follow the instruction manual.  Wiring location must not interfere driving, get in or out from car.  Use electrical tape to insulate the ends of all wires, even if they are not used. Proper insulation prevents arcs, shocks and fires.  When installation is complete, test all vehicle electrical systems to ensure they operate correctly, including lights, horn, brake lights, and emergency flashers.  According to our sales policy, any problems caused by user’s mistake, careless can not be guaranteed. Caution  All steps of installation should be done by well-trained specialist.  During installation ignition key should be taken off and after all installation finish connect power cable with main door sill plate for the last step.  Do not install the main unit in places where it may be exposed to dew condensation (around the air conditioning hose, etc), or in locations where it may come in contact with water, high levels of moisture, dust or oily smoke  Install wiring in a manner in which cables will not come in contact with metal parts. The wiring may be damaged by contact with metal parts, resulting in fire and shocks. Avoid all contact with hot surfaces when wiring the main unit. High temperatures may damage wiring, causing shorts, arcing and fires.  Kindly check all parts are in the box, when receiving the product, if anything missing, inform to the supplier or manufacturer. Warning / Caution

Specifications ★ Main Specifications 1. Components Door Sill Plate * 2EA (Driver door, Passenger door) Magnetic * 1EA 2. Power specification Input power : 9VDC ~ 15VDC - Precise low power design - Intelligent Movement with Micom - Luxury Performance with Each LED movement - 3 Minutes after door open, switches to Safe mode (Switching to Sleep Mode ) - 5 Minutes after door open, no longer supplying power to LED (LED Power Block ) - Special car protection film with PPF Coating - Custom Design / Material - Waterproof applied ★ Features

What is in the box ★ What is in the box? - Door Sill Plate : 2 EA - Magnetic : 1 EA - Installation manual : 1 EA

Installation Step 1. Check if you have all the components. Step 2. Remove the door step cover as left photo.

Installation Step 3. Find the B+ power and permanent ground wire from the car and make wiring with the each wires from the product. Step 4. Attach the magnetic on lower part of car door as left picture.

Gallery ★ Audi A4 ★ Audi A6

Gallery ★ Renault Samsung SM7 (Renault Talisman) ★ Hyundai Avante MD (Hyundai Elantra)

Gallery ★ Mercedes Benz E-Class ★ BMW

Gallery ★ Cadillac ★ Chevrolet

Gallery ★ Kia Grand Carnival ★ Hyundai Grandeur

Gallery ★ Kia Grand Carnival ★ Hyundai Grandeur

Gallery ★ Hyundai I40 ★ Infinity

Gallery ★ Kia K3 ★ Mitsubishi Lancer

Gallery ★ Porsche Cayenne ★ Renault Samsung QM5 (Renault Koleos)

Gallery ★ Hyundai Santafe DM ★ Mercedes Benz SLK

Gallery ★ Kia Sorento ★ Kia Sportage

Available Car List Car BrandAvailable Car ListRemark New i30, i40, Santafe DM, MAXCRUZE, AVANTE MD, New ACCENT, AVANTE COUPE, GENESIS, GENESIS COUPE K3, SPORTAGE R, SORENTO R, FORTE KOUP,New CARENS, Grand CARNIVAL. New SM5, New SM7, NewART, All New SM7, QM5. new Cruze, Buick Lacross, malibu, ford taurus C-Class(2008~), E-Class(2010~), SLK(2012~), CLS(2011~) 3 Series(F30), 5 Series(F10), X3(2011~). X5(2007~) A4(2009~), A5(2013) A6(2012~). Cayenne. FX(2012~), G37, G35, G25, G37 Coupe. LANCER. CTS, STS, CTS Coupe.

Trouble Shooting Q. Magnetic does not work -  If the magnetic does not seem working, please put some of both side tape to be contacted closer to the plate magnetic sensor * Please do not use other magnetic unless it is not supplied by manufacturer or supplier, it may cause problems. Q.LEDs does not light up -  Please check the wiring (Car battery (B+) and ground wires) (You can connect it to car battery directly to test) * For wiring, please ask car installation specialist for help

RM# A-505, Banwol High Tech Village, Wonsi-Dong, Danwon-Gu, Ansan-Si, Kyungki-Do TEL : | FAX : Website : We are ready to offer you customizing solution! If you need any special LED product, please contact us!