Lift Trucks for Ports, Terminals & Industries Handling of containers, steel, aluminium, pipe, wood, paper, concrete, waste…10-32 T

Lift Trucks for Ports, Terminals & Industries Handling of containers, steel, aluminium, pipe, wood, paper, concrete, waste…33-60 T

Fork Lift Trucks 28-33 tons Models: SMV 28-1200B SMV 32-1200B Wheelbase: 4500 mm 4750 mm Engines (CanBus) 28/33-1200: Volvo (Std) TAD-722-VE (180 kW / EU 2) Option TAD-760/DC-9/QSB-6,7 (EU 3a) TAD-762-VE (185 kW/3b) Engines (CanBus) 32/33-1200: Scania (Std) DI-12-54A (222 kW / EU 2) Option DC-12, TAD-12, QSM-11 (EU 3a) Automatic Transmission (CanBus): DANA TE-17312 (3+3 speed) 28/33-1200 DANA TE-27418 (4+4 speed) 32/33-1200 ZF 4WG-191 (3+3 speed) EU st 3b 28/33-1200 ZF 4WG-261 (4+3 speed) EU st 3b 28/33-1200 Drive axle (Wet Disc Brakes): Kessler D91-B (80 T / W=3440 mm) 16.00x25”/PR28 (28-1200…32-1200) 16.00x25”/PR32 (33-1200) Pumps: Parker LS-pumps (105+75 cc) 4 hydraulic servo levers (4 functions) All lift trucks has full capacity up to 9000 mm lift height

Fork Lift Trucks 60-70 tons Models: SMV 60-1500B SMV 64-1200B* * New & other models on request ! Wheelbase: 6000 mm 6000 mm* Engines (CanBus): Scania DI-12-55A (294 kW / EU 2) Option DC-12-56A (294 kW / EU 3a) Option (new) DC-13-074A2 (294 kW / EU 2) DC-13-077 A2 (294 kW / EU 3b) Automatic Transmission (CanBus): STD: TE-32418 (4+4) OPT: ZF 4WG-311 (4+3) only EU st 3b Drive axle (Wet Disc Brakes): Kessler D111 (140 T / W=4,60 m / 21.00x35”) Pumps: Parker LS-pumps (105+75+60 cc) STD 52-54 Parker LS-pumps (2x105+60 cc) STD 60-64 Full capacity up to 6000 mm lift height

Fork Shaft System (FSS) - forks, coil rams, clamps, spreaders… 13,6 T + Bale Clamp 16 T + Dual Roll Clamp 20 T + End Lift 508 25 T + Coil ram/Forks 45 T + Coil ram/forks (Pin) 45 T + Coil ram/forks (Hook) 45 T + Inverted forks & Spreader

SMV 52-1200 Model 2010 / Scania 12L + Dana TE-27 + Kessler D106 + 18x33”/ EMC

SMV 12-1200 / Saw mill truck / Fork levelling fork / 4 packages

SMV 13,6-600 / Paper bale trucks / 8 T in clamp / Raised cab / EMC

SMV 13,6-600 / Paper bale trucks / 8 T in clamp / Raised cab / Freelift mast / EMC

SMV 16-1200 / Paper rolls / 12 T in clamp / 180 D rotator seat / Raised cab +500 / EMC

SMV 12-1200 / Scrap handling truck / 180 deg rotator carriage / Raised cabin 500 mm

SMV 45-1200 / Steel handling / Fork shaft system (quick-change) / Forks & Coil ram

SMV 16-1200 / Steel pipe truck / Grab attachment

SMV 18-1200 / Steel grab truck / Raised cab 1200 mm

SMV 52-1200 / Steel slab handling / Forks or Magnet / Hydraulic generator / 40 T slabs

SMV 52-1200 / Steel slab handling / Forks or Magnet / Hydraulic generator / 40 T slabs

SMV 45-1200 / Steel slabs / 4 forks - 1200 C / 2 forks + Magnet - 400 C / 38–45 T slabs

SMV 37-1200 / Concrete handling truck / wide carriage / 4 forks / raised side cabin

SMV 42/45-1200 / Rock handling trucks / Dusty conditions / Pin-type forks

SMV 18/25-1200 / Forks + Spreader on FSS / End stacking & container repair

SMV 37-1200 / General cargo truck / Fork shaft system (forks & coil ram)

SMV 42-1200 / 3 high 9’6” / ELME 815 (20-40 ft) / Inverted Forks

SMV 16/25-1200 / Boat loading / Double fork levelling - stroke 800 mm / Long forks