1 SORMAT Universal Facade Plugs S-UF, S-UP, S-FP For safer construction

2 The Sormat universal façade plugs are expansion anchors which produce frictional forces in the base material. Plugs can be installed directly through the fixture (drill-through and drop-in installation). The Sormat universal façade plugs are designed for fastenings of medium heavy loads. Plugs are suitable on practically all base materials besides sheet materials. Sormat universal plugs are made from high-quality polyamide PA66. Product description Sormat universal facade plugs

3 Suitable base materials Concrete Natural stone Solid Masonry / Hollow Masonry Aerated concrete Light Gravel Sand Lime Brick Sormat universal facade plugs

4 Types + Type S-UF Sormat universal facade plugs

5 Types + Type S-UP Sormat universal facade plugs

6 Types + Type S-FP Sormat universal facade plugs

7 S-UP range S-UP range with zinc plated screw (+ mg) 100 mm 115 mm 135 mm 160 mm Plug length 80 mm Sormat universal facade plugs

8 S-UF Range S-UF range with zinc plated screw (+ mg) Plug length 100 mm 115 mm 135 mm 160 mm 80 mm Sormat universal facade plugs

9 S-UF range S-UF range with stainless steel screw A2, A4 100 mm Plug length Sormat universal facade plugs

10 About features and benefits New plug type is designed to be universal. For use in hollow, porous and solid base materials. One type fits for hard base materials as well as porous materials. No more selection needs to be done (KAT vs. KAT N) FEATUREBENEFIT Each plug is marked with the type S-UF or S-UP Recognition and traceability can be done more easily The plug lengths are differentiated by different colors Recognition and traceability can be done more easily Special design of the screw and plug Products are tested with two anchorage depths (50 and 70 mm) The reduced friction during the screwing process prevents the steel breagake and ensures more reliable installation More flexibility for the installations Increased pull-out loadsHigher performances for higher requirements. Higher loads can be obtained with deeper embedment depths. Sormat universal facade plugs

11 ETA APPROVAL ETA-12/0003, valid from to Included S-UF, S-UP & S-FP Includes all sizes and colors Includes ZP, MG, A2, A4 For use in: Concrete(cracked and uncracked) Solid and hollow brick Tension loads: 2,6 kN in cracked C20/25 5,0 kN in uncracked C20/25 (Not ETA) Shear loads: 6,5 kN in cracked C20/25 6,5 kN in uncracked C20/25 (Not ETA) ETA-approval Sormat universal facade plugs

12 Cladding / Façade installations Metal construction, profiles Roofing installations Fastening door and window frames Substructures Applications Sormat universal facade plugs

13 Competitor comparison Sormat universal facade plugs

14 Competitor comparison Sormat universal facade plugs

15 Technical table Sormat universal facade plugs

16 Support material - TRUST & FIX -magazine - Product catalog - TRUST FIX –CD - Technical manual - Training packages - Internet Sormat universal facade plugs

17 Thank you!