1 AIG_AW880W Write IMEI guide Date ： LONGCHEER CONFIDENTIAL

一、 Required SW&HW tools ： 1 、 PC 2 、 USB cable 3 、 Write IMEI tools ： MTK_SmartPhone_WriteIMEI_V1.2 4 、 The corresponding models of software package 5 、 The corresponding models of driver

二、 Operation procedure ： 1 、 The first use of mobile phone, need to install the driver, as follows: 1 ） open device manager, figure 1 below 图1图1

2 ） USB cable to the mobile phone ( mobile phone equipped with batteries, do not need to boot) connected to the computer, such as a computer installed before driving, it will pop-up ' new hardware ' dialog, manually select the drive path, corresponding mobile phone driver installation. Figure 2: Fig2

3 ） With pretend to complete the drive, in the ' device manager ' of the ' port ', can find a new port, such as the Fig3 Fig 3

2 、 Write IMEI procedures ： 1 ） Open the writing tool, as the 4 fig4

2 ） Select NV Database File Click the NV Database file lower right button, select and mobile phone versions of the same software upgrade package in the.SRC file. Figure 5 fig5

3 ） Check ' Two IMEI ', can be written in IMEI No. two ( Note: GSM and WCDMA ) each occupying a. Figure 6 fig6

4 ） Tool settings Please click on the " config ", enter the system settings. Set password: LCT ( uppercase ). just hook ' IMEI can be re-written ' election. Figure 7 below fig7

5 ） Start to write the number Operation steps: 1 use the configuration tool 2 to enter the IMEI number 3 mobile phone equipped with battery ( not boot ) 4 and click the START button, and then use the USB cable to connect the computer 5 wait for completion, suggesting that PASS ( Figure 8 below ) fig8

11 End Q&A