SAFETY RULES AND PROCEDURES FOR POWER TOOLS INDEPENDENCE MIDDLE SCHOOL TECHNOLOGY EDUCATION DR. HURD 2010.

Slides:

Advertisements

Similar presentations

Power Tools Safety. Portable Circular Saws Stock must be well supported in such a way that the kerf will not close and bind the blade.. Thin materials.

Advertisements

Research & Development Machine Safety Information.

Principles of Manufacturing Safety First! Part II

Stationary Power Tool Safety

Band Saw Safety Rules. Safety Rule #1 Keep all guards in place. Keep all guards in place.

Manufacturing Technology Safety: Band Saw. Safety Rule #1  Keep all guards in place.

Woodworking with Power

SCROLL SAW SAFETY VIDEO. 1. Only make adjustments to the saw or your material when the saw is powered off 2. Install the blade with the teeth facing down.

Lab and Tool Safety.

Production Tools in Technology

Basic Tool Safety and Equipment

SAFETY RULES Follow all directions the first time they are given. Be courteous in language and actions. Be on time and prepared to participate. Respect.

Skilled Trades / Res. Cons’t. Band Saw Mr. Mark Shortall / Technology Department.

TABLE SAW SAFETY Pre-TEST. Ripping stock to width is accomplished by using a guide called the fence. TRUE.

Principles of Manufacturing Safety First! Part II Safety Materials for Scroll Saw and Band Saw Copyright © Texas Education Agency, All rights reserved.

Grimsby Secondary Construction Technology Equipment Safety.

Copyright © Texas Education Agency, All rights reserved. Flexible Manufacturing Basic Safety 1.

Table Saw Safety & Operation The Table Saw is one of the most versatile pieces of equipment but must be operated safely and correctly. Follow these safety.

BAND SAW SAFETY Pre-TEST. You should not support the stock with your hands on each side of the blade as a cut is being made. FALSE – support the stock.

RIPPING, CROSSCUTTING, CUTTING ANGLES, COMPOUND ANGLES, CUTTING DADO’S AND CUTTING RABBET’S.

Table Saw. General Safety Wear your safety glasses at all times Take off all jewelry Do not wear loose clothing Make sure you are the only person in the.

Power Tool Safety Guidelines for Construction Trades Students.

Safety Rules for 9 th Grade Shop Radial Arm Saw: Safety Rules Never cut a board that is less than 12 inches long. Always pull the saw using the handle;

Table Saw. Blade Guards Anti-Kickback Device Power Switch.

Harding High School Technology Lab Safety Power Machine Review Mr. Pottkotter & Mr. Robinson.

Table Saw Safety.

Objective 2.01 Recognize safety procedures and practices in a technological world.

Power Machine Safety Harding High School Mr. Robinson/ Mr. Pottkotter.

HEADS UP FOR SAFETY! SAFETY TUTORIAL. HEADS UP! H ANDS ARE THE MOST VULNERABLE PART OF THE BODY. E YES AND EARS ALSO NEED PROTECTION. A SK WHEN YOU ARE.

Band Saw Function: To make curved and irregular cuts in wood.

Band Saw Information Andy Lyman. Uses of the band saw The band saw is used to make straight or curved cuts Wide blades are for straight cuts Narrow blades.

Band Saw Safety Prevent an accident- be safe and smart!

COMPOUND MITER SAW SAFETY

Band Saw Safety in the Lab. Common Techniques Parts of the Band Saw.

Band Saw Safety Prevent an accident- be safe and smart! Copy down Copy down everything in black.

Square Plant Stand. TOOL: Radial Arm Saw NEXT STEP: Surface Planer RESULTS: Rough size pieces for 4 Legs. 33” long PROJECT Square Plant Stand PART Legs.

Scroll Saw Operation and Safety

Machine Safety Rules. Miter Saw Instructor must be present when you are using this machine. Keep wood flat and against fence Hold down wood Do not remove.

Skilled Trades / Res. Cons’t. Table Saw Mr. Mark Shortall / Technology Department.

Belt guard Guide post Upper chuck Hold-down table motor.

Bandsaw. General Safety Wear your safety glasses at all times Take off all jewelry Do not wear loose clothing Make sure you are the only person in the.

Safety Mr. Colby – Technology Education. What is Manufacturing?  Manufacturing is using Materials and Processes to make a Product.

Parts, Safety and Operation. 1. Fence 2. Table 3. Miter Adjusting Lever 4. Miter Scale 5. Turn Base 6. Vertical Hold-Down Vise 7. Arm 8. Slide.

Band Saw Safety Rules.

General & Machine Safety Notes

Research & Development

Flexible Manufacturing

BAND SAW CHAPTER 24.

Power Tool Safety Don’t operate a machine until:

Scott Highlands Middle School

Band Saw Safety Rules.

Anti-Kickback Fingers

Mr. Lidard’s Guide to Keeping All Your Body Parts

Drill Press Safety.

Motorized Miter Saw.

Scroll Saw Safety.

Band Saw Safety Rules.

The size of the Band Saw is determined by the diameter of the wheels;

Band Saw Safety Rules.

Metal Saw Types Thaddeus Stevens College of Technology

Prevent an accident- be safe and smart!

Prevent an accident- be safe and smart!

Band Saw Safety Rules.

Band Saw Safety Rules.

Foundations of Engineering and Technology I

Wood shop safety.

General Shop Safety Thinking Safe… Prevents Injury!

Presentation transcript:

SAFETY RULES AND PROCEDURES FOR POWER TOOLS INDEPENDENCE MIDDLE SCHOOL TECHNOLOGY EDUCATION DR. HURD 2010

BANDSAW GENERAL SAFETY RULES 1.Obtain instruction on the safe operation of the band saw before using the machine. 2.Always use the guards whenever possible. Check to see that they are in place and properly adjusted and secured. 3.Use the proper blade size and width for the job. 4.Adjust the upper blade guard so it is about 1/8” above the work surface. 5.Properly adjust the blade tension, tracking, blade guides and blade support bearings. 6.Keep arms, hands and fingers away from the blade at all times. 7.Avoid awkward operations and hand positions where a sudden slip could cause a hand to move into the blade.

BAND SAW SAFETY RULES 8.Never start the machine before clearing the table of all objects, tools and scrap pieces. 9.Never start the machine without instructor permission. 10.Never start the machine with the work piece against the blade. 11.Hold work piece firmly against the table. DO NOT attempt to saw a work piece that does not have a flat surface against the table. 12.Hold work piece firmly and feed at a moderate rate. 13.Never reach under the table while the machine is running. 14.Turn the machine off to back out of an uncompleted or jammed cut. 15.Make relief cuts prior to cutting long curves.

BAND SAW SAFETY RULES 16. Turn the machine off and wait for the blade to stop prior to cleaning the blade area, removing debris near the blade, removing or securing the work or changing the angle of the table. A coasting blade can be dangerous. 17.Never reach behind the blade for any reason. 18.Always use a push stick when cutting close to the blade to avoid contacting the blade. 19.Never perform layout, assembly or set up work on the table when the machine is running. 20.Turn off the machine before installing or removing accessories or when making repairs. 21.Always wait for the machine to come to a complete stop before leaving the area. 22.Always use a V-block to cut cylindrical stock.

BAND SAW PARTS Upper blade guard Wheel guard Blade tensioner Table Fence guide rails Power switch Side blade guard Table adjusting wheel Base Lower blade guide Pilot bearings