HOW TO TUTORIAL: CREATING DATA VISUALIZATION GROUP 8

STEP 1: GETTING STARTED Gather all the information you would like to include in your visual Click this link to get started with your visualhttps://google-developers.appspot.com/chart/interactive/docs/gallery/combochart

STEP 2: PICK YOUR CHART You have the option to select what type of chart you would like to use for the visual on the left side Select the donut graph

BETTER VIEW OF THE DIFFERENT CHARTS AVAILABLE

STEP 3: ALMOST THERE! After selecting the donut graph there should be a bar that lights up blue and says “Code it yourself on JSFiddle” click this bar. After selecting this it will take you to a page on the JSFiddle site where you can see the coding info and a example of the graph you selected (donut graph).

BETTER VIEW OF THE LAST PICTURE IN STEP 3

STEP 4: ADD THE INFORMATION Remember all that information you gathered for the visual? Great! Time to put it to use. I suggest having a tab open with the example so you can switch back and forth in case you get confused. I’ll post a screen shot of how I input my data and also show how the example did theirs.

STEP 4: CONTINUED For this step you do not need to change anything!!! EXCEPT for the words in green and red. The words in green are where you are going to input your information. Make sure you only change what needs to be changed. Keep the same format and look at the example if necessary. After inputting all the information click run in the top corner to make sure it comes out as a chart. If nothing shows after you click run then you messed up the formatting.

POINTS TO REMEMBER! Inside the red box is where your information goes! You can change the categories and adjust the hours or minutes per day! Keep the right format or your chart will not show up! Below the red rectangle there are more green letters that you can change for the title, I highlighted it in yellow.